• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.80-87
• /
• 1993

The various configuration of thin-shaped bevel gears are used usually for such as main reduction gear of the hovercraft. But the reasonable and concise guide to thedesign of the se bevel gears is not yet obtained, since the tooth of bevel gear has complex form. The purpose of these investigation is to be establish the design guide and to propose the desirable configuration form for thin-shaped straight bevel gear. In this report, the desirable configuration is examined experimentally by clearing up the effect of web and rim thickness, rim support condition upon the load distribution and root stress distribution along the tooth trace. The results are summarized as follows. (1) The crowning of tooth trace exerts a significant effect on the root stress distribution of thin-shaped bevel gear. (2) As the desirable configuration of the thin-shaped bevel gear, it is to be recommended that the rim is supported at the heel side of tooth trace. (3) But, as special type, it is desirable that the rim is supported at the toe side.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.486-494
• /
• 2006

In this paper, we present the complete isotropy analysis of a caster wheeled omnidirectional mobile robot (COMR) with nonredundant/redundant actuation. It is desirable for robust motion control to keep a COMR close to the isotropy but away from the singularity as much as possible. First, with the characteristic length introduced, the kinematic model of a COMR is obtained based on the orthogonal decomposition of the wheel velocities. Second, a general form of the isotropy conditions of a COMR is given in terms of physically meaningful vector quantities which specify the wheel configuration. Third, for all possible nonredundant and redundant actuation sets, the algebraic expressions of the isotropy conditions are derived so as to identify the isotropic configurations of a COMR. Fourth, the number of the isotropic configurations, the isotropic characteristic length, and the optimal initial configuration are discussed.

• Journal of Ship and Ocean Technology
• /
• 제5권3호
• /
• pp.14-26
• /
• 2001

The shape of an industrial product has to be determined within the constrained conditions of keeping firmly many kinds of functional and performance requirements. On the other hand, the configuration of artistic work would be created desirably using the sense of aesthetics, even if conflicting slightly with these requirements. The development of a methodology for an aesthetic design founded on human sensitivity is becoming highly desirable in recent years. In this paper, a method of measuring beauty quantitatively for an artistic evaluation if proposed using the aesthetic cognitive theory and the optimum configuration could be found by a search using the genetic algorithm. Furthermore, an expression of optimum ship appearance can be gained as graphics.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.135-138
• /
• 2000

This paper is intended to propose what manufacturing configuration (manufacturing planning and shop floor control) is suitable for the tire industry. Basically tire-manufacturing process is mixed-products, parallel-disconnected-flow-shop. Both throughput time and cycle tine are very short, the variety of tires is very high, the setup time is long, shop floor data reporting requirements is high, and there are many equipments and people working. And with no exception, tire industry also now confronts increasing requirements of delivery conformance with the above peculiar characteristics of tire manufacturing and changing market environments, this paper suggests, weekly master scheduling with no MRP is desirable and traditional kanban is right selection for shop floor control/scheduling. This paper describes why this configuration should be, using the manufacturing engineering principles and some new insights like four primitives of parallel flow shop. Generally known that shop with high parallel-product-mix and long setup time isn't good candidate for kanban. The four primitives of parallel flow shop explain why kanban is also useful scheduling technique in that environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제23권5호
• /
• pp.593-602
• /
• 1999

This paper presents combustion characteristics of LPG-air mixture ignited by the plasma jet in a cylindrical vessel with constant volume, in which our focus is placed on the multi-hole plug configuration. Four types of the plug configuration depending on the number of orifice and the arranged angle are considered, along with two cases of conventional spark ignition for comparison. Not only the flame propagation is photographed at intervals, but the pressure in the combustion chamber is also recorded through the entire combustion process. The results show that the plasma jet ignition enhances the overall combustion rate remarkably in comparison to the spark ignition by generating irregular flame front and penetrating through the unburned mixture. The combustion enhancement rate agrees favorably with the available data, which supports the validity of our experiment. Synthetically estimating, the two-hole sixty-degree plug appears to be the most desirable, in that the maximum pressure as well as the combustion duration is less affected by the sub-energy level than the others. It is also deduced that there may exist an optimal plug configuration capable of rapid combustion for a specific combustion chamber.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.65-72
• /
• 2001

The design of multi-stage gear drives is a time-consuming process, since on includes more complicated problems, which are not considered in the design of single-stage gear drives. The designer has th determine the number of reduction stages and the gear ratios of each reduction state. In addition, the design problems include not only the dimensional design but also the configuration design of gear drive elements. There is no definite rule and principle for these types of design problems. Thus the design practices largely depend on the sense and the experiences of the designer , and consequently result in undesirable design solution. We propose a new generalized design algorithm to support the designer at the preliminary design phase of multi-stage gear drives. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. The algorithm consists of four steps. In the first step, a designer determines the number of reduction stage. In the second step. gear ratios se chosen by using the random search method. In the third step, the values of basic design parameter are chosen by using the generate and test method. Then, the values of other dimension, such ad pitch diameter, outer diameter, and face width, are calculated for the configuration design in the final step. The strength and durability of a gear is guaranteed by the bending strength and the pitting resistance rating practices by using the AGMA rating formulas. In the final step, the configuration design is carried out b using the simulated annealing algorithm. The positions of gears and shafts are determined to minimize the geometrical volume(size) of a gearbox, while satisfying spatial constraints between them. These steps are carried out iteratively until a desirable solution is acquired. The propose design algorithm has been applied to the preliminary design of four-stage gear drives in order to validate the availability. The design solution have shown considerably good results in both aspects of the dimensional and the configuration design.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제12권2호
• /
• pp.73-82
• /
• 2009

The traffic volume of Seoul is extremely high in comparison to other major cities in Korea, and the result has been harmful physical and mental exposure to pollution by Seoulites on a regular basis. The street air pollution is more important than the others, because the air pollution generated by street traffic directly impacts the health of nearby pedestrians. This problem requires urgent attention and resolution. Among the factors creating the air pollution originating from the street, is the configuration of streets, which have emerged as the most significant because it is related to air and pollutant dispersion. Therefore, this study was conducted under the assumption that street form affects the air quality. Study sites were classified by street characteristics, and air quality was analyzed in each class. Then the OSPM (Operational Street Pollution Model) was employed to simulate the relationship between street configuration and air quality of streets within the old city center and new city center in Seoul. After that this study analyzed the correlation between air pollution and the spatial configuration of urban streets (ex. street width, building height, building density, etc.) to determine their contributions to air pollution. The outcome of this study is as follows : First, the result that was derived from the correlation analysis between street configuration and air quality hewed that the air pollution of the street is influenced by the average height of building, width of the roads as well as traffic volume. On the roadside, the concentration level of $NO_2$ is mainly affected by the average height of building and the deviation of building height along the street and CO is affected by street width. The outcome of this study can be used as a basis for more sound urban design policies, and the promotion of desirable street environments for pedestrians.

• Journal of the Korean Ceramic Society
• /
• 제40권4호
• /
• pp.371-374
• /
• 2003

Various types of equation for mixing rule on permittivity of mixture have been proposed, but none of these is not perfect because of the inconsistency between the actual geometrical configuration and the basic model for calculation. Serial model and parallel model are lower and upper extremes of mixing manner, the apparent permittivity of any other type of mixture stay between these two extreme states. For the random mixture of the stumpy fine particles, customarily the logarithmic mixing rule has been applied. But, the logarithmic mixing rule does not give the proper value of permittivity in low or high mixing rate of constituent. The author proposed the new mixing rule that gives better consistency with measured value in whole mixing range compared to the logarithmic rule. In this paper, a desirable refinement on the equation proposed in the previous paper is made to adapt to thr configuration image of actual compound and then the equation has been expanded to the complex permittivity to apply the mixing rule on the dissipative materials cases.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.949-962
• /
• 2016

The braking hose in the automotive hydraulic braking system exhibits the complicated anisotropic large deformation while its movable end is moving along the cyclic path according to the steering and bump/rebound motions of vehicle. The complicated large deformation may cause not only the interference with other adjacent automotive parts but also the durability problem resulting in the fatal microcraking. In this regard, the design of high-durable braking hose with the interference-free layout becomes a hot issue in the automotive industry. However, since it has been traditionally relied on the cost-/time-consuming trial and error experiments, the cost- and time-effective optimum design method that can replace the experiment is highly desirable. Meanwhile, the hose deformed configuration and fatigue life are different for different hose cyclic paths, so that their characteristic investigation becomes an important preliminary research subject. As a preliminary step for developing the optimum design methodology, we in this study investigate the hose deformed configuration and the fatigue life for four representative hose cyclic paths.

• Journal of the Korean Institute of Educational Facilities
• /
• 제13권2호
• /
• pp.50-60
• /
• 2006

In search of the improvement plan for elementary schools which aims at the efficient application of new educational programs according to the introduction of the 7th National Curriculum, the analysis results for the spatial configuration regarding the modernized elementary schools in Busan City are as follows: 1) The analysis of expansion in the building area reveals that the building area per classroom has been increased from $200m^2$ in 1995 to $350m^2$ in 2005 based on the data gathered from the constructed schools during that period. 2) While the ratio of classrooms per the gross school area has been decreased from 35% in the late 1990s to 20% in the 2000s, the entire school size continue to become larger, which is considered as desirable change. 3) New construction and addition of special classrooms and multi-purpose spaces have continued to be increased. Multi-purpose spaces were positively considered in the early 2000s, but recently built schools tend to limit the construction of multi-purpose spaces only to lower grades' space or not to obtain them owing to the analysis that its utilization is limited. 4) Most schools constructed after 1999 are equipped with dining hall and multi-purpose halls, and show the increase in their sizes. Especially, dining hall tend to be located on the upper floors for better environmental conditions.