• Journal of the Korea Society of Computer and Information
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2018

The Korean Air Force FA-50 aircraft currently operating in the Air Force is using Ultra High Frequency (UHF) frequency communications for navigation communications with ground control stations or other aircraft. The pilot communicates by changing frequency at any time during flight, and performs communication by directly inputting from the Integrated Up-Front Controller installed in the cockpit. The frequency is designated as secret, and the pilot receives the task with the frequency channel number (001~xxx) and finds the frequency of the channel in the list of 4,000 frequency channels and inputs it manually. This reduces the safety and convenience of pilots' operations and exposes them to hazards that may occur especially during night flight missions. In this paper, we propose a function to embed the frequency corresponding to the frequency channel list in IMDC, the aircraft mission computer, and to automatically change the frequency when the pilot only inputs the channel number.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.25-40
• /
• 2015

Korean tourist areas are designated/managed in accordance with the Tourism Promotion Act. Since Taejongdae was designated as a tourist area in 1969, a total of 230 tourist areas have been designated/built/operated. It has been 46 years since the first tourist area was designated. According to the Tourism Area Life Cycle by Butler, it is estimated that the flow of the life cycle will be reflected in ups and downs over time. Thus, this study aimed to provide basic data for suggesting the direction of changes and development of the future tourist areas after analyzing the life cycle stage of domestic tourist areas, by applying the Tourism Area Life Cycle by Butler. The research method was based on the tourist areas by year, the number of visitors, and data of the target to derive the change transition curve, obtained by dividing the life cycle stages of the tourist areas based on the visitor rate of change. In the analysis results, more than 1/3 of domestic tourist areas are reaching the stagnation/decline stage, and tourist areas such as hot springs and seaside/beach resources show a particularly high ratio of stagnation/decline. The tourist areas that already have reached the stagnation/decline stage will need to analyze the causes for the decline, seek for resolution measures, and introduce new innovative elements. Even though the results of this study are not sufficient to be used as an absolute standard to decide the life cycle stage of domestic tourist areas, it is considered to be adequate for phenomenologically understanding the life cycle stage of Korean tourist areas. Based on this study, the causes for the stagnation/decline of tourist areas can be revealed while it can be also used as basic research to establish revitalization measures for tourist areas by introducing new innovation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.108-116
• /
• 2018

Objectives: This study investigated to the analytical work environment, analyst's expert and status of analytical instrument in the designated organization's laboratory for measuring work environment, and carried out to ensure reliability of analytical results. Methods: This study was conducted by 114 analysts who work in designated organization's laboratory for measuring work environment. Information on the working environment and personal characteristics of the analysts were collected using a self-reported questionnaire and were analyzed using the SPSS program through analysis of frequency and t-test. Results: The speciality of subjects was occupational health(57.0%), environmental health(38.6%) and environmental engineering(4.4%), and they had a higher level of academic ability than workers in other industries. Analysts had to handle a large number of sample analysis and many tasks other than analytical work. The analysts answered that it was difficult to analyze organic substances than inorganic substances, and the difficult parts were the analytical methods setting of new substances(55.3%), instrument analysis(24.6%) and principle of analysis(23.7%). Analytical instruments mainly have legally required instruments. The difficulty of the analysis is solved from the senior analyst in the laboratory and analytical information is mainly exchanged through seminar organized by the Association of Occupational Health Analysts. The analysts who are planning to move or considering the company were 48.2%, and the reasons for moving the company were difficult to work(14.0%), low salary(9.6%), employment type(8.8%) and job stress(7.0%). Conclusions: The conclusions of our study were that it was possible to secure reliability by solving the problems such as implementing professional education to improve expertise of analysts, strengthening analytical instruments through institutional improvement and improving work environment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.21-21
• /
• 2017

Severe lodging has recurrently occurred at strong typhoon's hitting in recent climate change. The identification of quantitative trait loci (QTLs) and their responsible genes associated with a strong culm and their pyramiding are important for developing high-yielding varieties with a superior lodging resistance. To identify QTLs for lodging resistance, the tropical japonica line, Chugoku 117 and the improved indica variety, Habataki were selected as the donor parent, as these had thick and strong culms compared with the temperate japonica varieties in Japan such as Koshihikari. By using chromosome segment substitution lines (CSSLs) in which chromosome segments from the japonica variety were replaced to them from Habataki, we identified the QTLs for strong culm on chrs. 1 and 6, which were designated as STRONG CULM1 (SCM1) and STRONG CULM2 (SCM2), respectively. By using recombinant inbred lines (BILs) derived from a cross between Chugoku 117 and Koshihikari and introgression lines, we also identified the other QTLs for strong culm on chrs. 3 and 2, which were designated as STRONG CULM3 (SCM3) and STRONG CULM4 (SCM4), respectively. Candidate region of SCM1 includes Gn1 related to grain number. SCM2 was identical to APO1, a gene related to the control of panicle branch number, and SCM3 was identical to FC1, a strigolactone signaling associated gene, by performing fine mapping and positional cloning of these genes. To evaluate the effects of SCM1~SCM4 on lodging resistance, the Koshihiakri near isogenic line (NIL) with the introgressed SCM1 or SCM2 locus of Habataki (NIL-SCM1, NIL-SCM2) and the another Koshihikari NIL with the introgeressed SCM3 or SCM4 locus of Chugoku 117 (NIL-SCM3, NIL-SCM4) were developed. Then, we developed the pyramiding lines with double or triple combinations derived from step-by-step crosses among NIL-SCM1 NIL-SCM4. Triple pyramiding lines (NIL-SCM1+2+3, ~ NIL-SCM1+3+4) showed the largest culm diameter and the highest culm strength among the combinations and increased spikelet number due to the pleiotropic effects of these genes. Pyramiding of strong culm genes resulted in much increased culm thickness, culm strength and spikelet number due to their additive effect. SCM1 mainly contributed to enhance their pyramiding effect. These results in this study suggest the importance of identifying the combinations of superior alleles of strong culm genes among natural variation and pyramiding these genes for improving high-yielding varieties with a superior lodging resistance.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.2
• /
• pp.30-36
• /
• 2000

The hidden node plays a role of the functional units that classifies the features of input pattern in the given question. Therefore, a neural network that consists of the number of a suitable optimum hidden node has be on the rise as a factor that has an important effect upon a result. However there is a problem that decides the number of hidden nodes based on back-propagation learning algorithm. If the number of hidden nodes is designated very small perfect learning is not done because the input pattern given cannot be classified enough. On the other hand, if designated a lot, overfitting occurs due to the unnecessary execution of operation and extravagance of memory point. So, the recognition rate is been law and the generality is fallen. Therefore, this paper suggests a method that decides the number of neural network node with feature information consisted of the parameter of learning algorithm. It excludes a node in the Pruning target, that has a maximum value among the feature value obtained and compares the average of the rest of hidden node feature value with the feature value of each hidden node, and then would like to improve the learning speed of neural network deciding the optimum structure of the multi-layer neural network as pruning the hidden node that has the feature value smaller than the average.

• IE interfaces
• /
• v.16 no.3
• /
• pp.352-361
• /
• 2003

Vehicle manufacturing plant is a typical mixed-model production system. Generally it consists of three main shops including body shop, painting shop and assembly shop in addition to engine shop. Each shop contains diverse manufacturing processes, all of which are integrated in a form of flow line. Due to the high pressure from the market requesting small-volume large variety production, production planning becomes very critical for the competitiveness of automotive industry. In order to save costs and production time, production planning system is requested to meet some designated requirements for each shop: to balance the work load in body and assembly shops, and to minimize the number of color changes in painting shop. In this context, we developed a sequencing module for a vehicle production planning system using the ILOG Solver Library. It is designed to take into account all the manufacturing constraints at a time with meeting hard constraints in body shop, minimizing the number of soft constraints violated in assembly shop, and minimizing the number of color changes in painting shop.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.1
• /
• pp.21-29
• /
• 2019

Objectives: The Regional Cardiocerebrovascular Center (RCCVC) Project designated local teaching hospitals as RCCVCs, in order to improve patient outcomes of acute cardiocerebrovascular emergencies by founding a regional system that can adequately transfer and manage patients within 3 hours. We investigated the effects of RCCVC establishment on treatment volume and 30-day mortality. Methods: We constructed a panel dataset by extracting all acute myocardial infarction cases that occurred from 2007 to 2016 from the Health Insurance Review and Assessment Service claims data, a national and representative source. We then used a panel fixed-effect model to estimate the impacts of RCCVC establishment on patient outcomes. Results: We found that the number of cases of acute myocardial infarction that were treated increased chronologically, but when the time effect and other related covariates were controlled for, RCCVCs only significantly increased the number of treatment cases of female in large catchment areas. There was no statistically significant impact on 30-day mortality. Conclusions: The establishment of RCCVCs increased the number of treatment cases of female, without increasing the mortality rate. Therefore, the RCCVCs might have prevented potential untreated deaths by increasing the preparedness and capacity of hospitals to treat acute myocardial infarction patients.

• Korean Journal of Plant Taxonomy
• /
• v.37 no.2
• /
• pp.155-196
• /
• 2007

This study was carried out to elucidate floristic data of Chirisan National Park by performing practical field investigation for 1 year and literatures survey simultaneously in 2004. The data from field study were yielded based on voucher specimens. Total number and components of flora of Chirisan National Park is revealed as 1,825 taxa. Among 1,825 taxa, 708 taxa were identified in this field study, and these were comprised 37 orders, 109 families, 382 genera, 590 species 3 subspecies 95 varities 20 forms. Unconfirmed taxa in field but recorded previous literatures were 1,117 taxa, which consist of 41 orders 130 families 500 genera 901 species 9 subspecies 140 varities 67 forms. In conclusion, there may be provisionally 1,825 (708+1,117) taxa in Chirisan National Park. The 43 taxa were firstly found out in this field study. In the floristic data from field study, the number of Korean endemic plants were 31 taxa, the rare and endangered plants which was designated by Korea Forest Service were 21 taxa, the taxa that is more than the third degree among the floristic regional indicator plants which was designated by Korean Ministry of Environment were 40 taxa, and naturalized alien plants to Korea were 27 taxa respectively. Among 1,117 taxa which were not found in this study but recorded in 22 previous literatures, the number of Korean endemic plants were 45 taxa, the rare and endangered plants which was designated by Korea Forest Service were 45 taxa, the taxa that is more than the third degree among the floristic regional indicator plants which was designated by Ministry of Environment were 121 taxa, and naturalized alien plants to Korea were 31 taxa. It can be inferred that the vegetation of Chirisan National Park was changing by some factors and valuable plant resources were tend to diminishing by such as human interference and developments.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.392-403
• /
• 2010

In this study, a new methodology by using the X-ray CT scan is proposed for estimating void ratio of very fine clayey soil. Since the particle size of the clay is too fine to calculate the volume of void inside the clays, CT scanning tests with a number of clay specimens that were artificially set to have various designated void ratios have been carried out. From the tests, a relationship between the CT values and void ratios is given to be used for estimating the invisible void ratio of very fine clay from a representative CT value scanned. The linear relationship was able to be acquired finally. It is expected that micro X-ray CT scanning can be capable of capturing the void ratio of very fine soils without any errors inherent in the conventional specific gravity tests.

• Journal of Environmental Science International
• /
• v.12 no.8
• /
• pp.835-840
• /
• 2003

Many various kinds of tourism resources have been distributed along the Nakdong river basin. Previous researches have focused mainly on environmental studies, including water quality control, industrial use of water, biodiversity, etc, with little research done in the field of tourism studies. Central to this study, therefore, is the identification and analysis, from the perspective of cultural tourism, of the area's distribution and characteristics of cultural properties registered by the MOCT. Review of related literature reveals : 1) spatial range bound with the jurisdiction of the river basin like DREO and NRBEO ; 2) analytical subjects limited to cultural properties designated by the three different administrative units of government, city and province. Along with the DREO's predominance over the NRBEO in the total number of cultural properties, the result finds that two cities, Andong and Gyeongju of Gyeongbuk are assigned ownership of most of the cultural properties under the jurisdiction of DREO, while Gyeongnam that of most of the ones under the NRBEO. However, those findings suggest the simple number of cultural properties with no significant level of importance and rarity value reflected. Therefore, future studies need to develop quantified modelling keeping cultural variables in mind and create cultural indices of the competitiveness of the local governments.