• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.218-223
• /
• 2012

A rigorous electro-optical simulation and ray tracing for an electric field driven liquid crystal Fresnel lens was proposed to obtain design parameters of the electrode pattern of the Fresnel lens. The optimal design was carried out using Taguchi's experimental method for 17.1"($368{\times}229.5$ mm) wide LCD panels with 9 views. For the calculation of the distribution of liquid crystal molecules and the optical transmission of the panel, finite difference method and extended Jones matrix method were used to deal effectively with highly nonlinear and complicated motional equations of the liquid crystal molecules and to obtain the oblique transmission characteristics of the LCD panel. As simulation results, the optimal lengths of the 3 electrodes of the Fresnel lens are 4.0 ${\mu}m$, 30 ${\mu}m$ and 83 ${\mu}m$, respectively, and the locations of the second and third electrodes are 32.9-33.0 ${\mu}m$ and 45.9-46.0 ${\mu}m$, respectively. The optimal applied voltage of the 3 electrodes are found to be 5.75 V, 7.80 V and 11.9 V, respectively.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.48-56
• /
• 2018

Due to the growing concerns of energy resource depletion and environmental destruction, the mass production of microalgae has been studied. The scale-up of a photobioreactor (PBR) is required for the mass production of biomass. In this paper, the geometric parameters and oxygen transfer rate (OTR) are considered, to scale up a flat panel photobioreactor (FP PBR). The PBR is designed using the goal-driven optimization (GDO) method to accomplish the scale-up. The local sensitivity of each output parameter with respect to the input parameter is analyzed through the design of experiment (DOE), and the design candidates are evaluated with the screening sampling method. The volumetric mass transfer coefficient is measured by the dynamic method.

• 한국정밀공학회지
• /
• 제33권9호
• /
• pp.723-730
• /
• 2016

This paper presents a cable-driven hydraulic actuator named Cable Rod Hydraulic Actuator (CRHA). The cable actuating system is attractive for designing a compact joint in robotic applications since it can be installed remotely from the joint. Recently, cable rods have been used in pneumatic area for inertia reduction. However, designing cable rods in hydraulics is challenging because it is difficult to achieve flexibility and endurance simultaneously under high pressure conditions. In this paper, the cable rod, which consists of a cable and jacket, is proposed to meet both requirements. To design the CRHA, we determined the design parameters, such as cylinder size, and selected the cable rod's material by friction and leakage test. Finally, comparisons experiments about step and frequency responses with conventional hydraulic actuators were performed to assess feasibility for robotic joints, and the results show that the proposed system has good bandwidth and fast response as robotic joints.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.1071-1078
• /
• 2017

A buncher is one of the main pieces of equipment in the medium energy beam transport line (MEBT) for China accelerator driven sub-critical system (C-ADS) Injector II. To focus the beam longitudinally and match the beam for the acceptance of the superconducting linac section, two room temperature quarter wave resonator (QWR) bunchers with frequency of 162.5 MHz have been designed as parts of the MEBT. According to the beam transmission matching of the MEBT and the geometric parameters requirements of bunchers, the unique mechanical structure and the main processing technology of buncher cavities and their couplers and tuners are described in this paper. The fabrication of bunchers and their parts have been completed and tested at high power, the test results agree well with the design requirements. These bunchers work well for about two years in Institute of Modern Physics, Chinese Academy of Sciences.

• Tribology and Lubricants
• /
• 제38권2호
• /
• pp.53-62
• /
• 2022

This study presents experimental measurements of the rotordynamic performance of a motor-driven small turbocompressor supported by gas beam foil journal bearings (GBFJBs) and compares the test results with the predictions of a computational model. The experiments confirmed that the rotational synchronous frequency component dominates the behavior of the overall rotor vibrations, whereas the nonsynchronous components are insignificant, indicating the rotor-bearing system remains stable up to 100 krpm. The undamped natural frequency and imbalanced response of the rotor-bearing system are predicted when integrating the finite element model of the rotor-bearing system with the predictions of the bearing dynamic coefficients. The results are in good agreement with the experimental results. In addition, base excitation test results show that the small turbocompressor can endure large external forces and demonstrate limited rotor amplitudes. A simple single degreeof-freedom rotor model using the nonlinear stiffness of the GBFJBs can effectively predict the test results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.8-14
• /
• 2007

This paper deals with the electrical design and analysis of a 300HP, 60,000rpm permanent magnet synchronous motor for turbo machine. The design is performed by analytic method of magnetic field theory. And electrical losses of the motor driven by current with sinusoidal and harmonic form are analyzed by using FEM.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.121-121
• /
• 2000

This paper presents a design of macro-micro system for high-speed mounting of micro-chips. A macro motion device is driven by DC servomotor and ball screw mechanism. To obtain fast response, a micro motion device utilizes a precision elector magnetic actuator In order to reduce peak impact force, We evaluate the design parameters that have an effect on it. And a characteristic of response is simulated using PID controller in velocity and force control.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.379-384
• /
• 2003

A turbo blower directly driven by a variable-speed BLDC motor was designed and tested to investigate performance characteristics. Computational analysis and performance tests validated the design method for the present turbo blower. Experimental measurements showed that the blower has an enough stability margin. This paper gives an outline of design, computational flow analysis and performance test for aerodynamic performance of the blower

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.445-452
• /
• 1990

In order to design a conveyer system which is driven by short primary single sided linear induction motors (SLIM), the thrust force characteristics of SLIM have been calculated from the fundamental equation based on Maxwell's electromagnetic equation and by varying the various design parameters. A conveyer system of moving secondary has been constructed using the design values obtained by the simulation and these values are compared with the experimental values. The control method of the conveyer system is also proposed.

• 정보처리학회논문지D
• /
• 제14D권1호
• /
• pp.121-130
• /
• 2007

소프트웨어 개발에 있어서 구현에 앞서 아키텍처를 설계하는 일은 프로젝트의 성공을 위해 필수적이다. 본 논문은 한국원자력연구소 내에서 가동 중인 하나로 원자로의 방사선감시시스템 소프트웨어 개발과정에서 품질속성 기반 설계방법을 적용하여 소프트웨어 아키텍처를 설계한 사례를 보여준다. 품질속성 기반 설계방법은 Bass[1]가 제시한 속성 기반 설계방법을 변형한 것이다. 이는 먼저 시스템의 기능요건 및 품질요건을 아키텍처 드라이버(driver)로서 도출하고, 이를 만족하기 위한 전술(tactic)을 선택하고, 선택된 전술에 근거하여 아키텍처를 결정하고, 결정된 아키텍처를 구현 및 검증하는 과정으로 이루어진다. 하나로 원자로 방사선감시시스템의 개발요건으로부터 가용성, 유지보수성, 호환성과 같은 품질요건이 추출되었으며, hot-standby 서버 이중화와 약결합의 모듈화와 같은 전술이 선택되었으며, 이중화 서버에 다수의 클라이언트가 연결되는 클라이언트-서버 구조와 객체지향적 데이터 처리 구조가 방사선감시시스템을 위한 아키텍처로 결정되었다. 상용도구인 Adroit를 이용하여 아키텍처가 구현되었으며, 아키텍처 검증은 기능 중심의 시험을 통해 이루어졌다. 적은 예산과 단기간 내에 완수해야 하는 방사선감시시스템 개발에 품질속성, 기반 설계방법을 적용함으로써, 보다 효율적으로 과제를 성공시킬 수 있었다. 방사선감시시스템 개발에서 설계된 아키텍처는 한국원자력연구소 내 다른 설비의 방사선감시시스템 개발에 재사용할 예정이다. 추가적으로 방사선감시시스템 아키텍처를 정량적으로 평가하는 작업이 필요하다.B-트리, CR-트리를 구현하는 방법을 기술한다. CC-GiST를 이용함에 따라 메인 메모리 데이터베이스 응용에서 여러 개의 캐시 인식 트리를 관리하는 번거로움에서 벗어날 수 있고, 응용의 요구에 따른 새로운 캐시 인식 트리를 최소한의 노력으로 효율적으로 구현할 수 있다.에 따라 증가한다. 에틸렌 함량이 50 wt% 보다 많을 경우, 혼합용매들의 극성인력 효과가 밀도 효과보다 커서 온도가 낮아짐에 따라 cloud-point 압력은 증가하였다. 에틸렌 함량이 50 wt% 보다 적을 경우, 혼합용매들의 극성인력 효과가 밀도 효과보다 작아서 온도가 낮아짐에 따라 cloud-point 압력은 감소하였다. 2번 150.2 cGy, 200 cGy, 환자 3번 150.5 cGy, 211.4 cGy, 환자 4번 155.5 cGy 198.6 cGy의 결과를 얻었다. 결 론: 본 원에서 변형 근치적 유방절제술 후 흉벽 방사선치료의 가장 적절한 볼루스 적용 횟수는 전 치료횟수의 $50{\sim}60%$ 적용이다.적인 기준을 마련하고 환자들이 치료과정에서 실질적으로 알고자 하는 의문점들을 체계적으로 교육해 나간다면 지금까지 보다 훨씬 더 나은 환자 만족과 치료 결과를 얻을 수 있으리라 기대된다.적 교육 훈련이 더 엄격하게 진행되므로, 부서 관의 협력으로 방사선사 보수교육에 합산하는 방안이 필요할 것이다. 임신이 확인된 방사선관계종사자의 피폭관리도 새로이 반영되어야 할 것이다. 따라서 업무의 특성상 사용되는 특별한 용어 외에 공통적으로 사용되는 용어의 통일은 반드시 필요하며, 방사선분야의