• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.638-644
• /
• 2008

It is required small size electronic ballast to fullfill the design philosophy of miniaturizing in the application of slim lamps. However, the traditional magnetic ballasts operated at 50-60Hz have been suffered from noticeable flicker, high loss, large crest factor and heavy weight. In this study, in order to solve these problems, It was proposed for driving 35W Class fluorescent lamp in the new type of electronic ballast, which is composed of rectifier, active power factor corrector, series resonant half bridge inverter and piezoelectric transformer. A 35W class(T5 class) fluorescent lamp is driven to successful by the fabricated ballast with piezoelectric transformer. Experimental results, It is proposed to driving the lamp using a electronic ballast at operating frequency of $75{\sim}79kHz$ approximatively. It is operated after for 25 min that were obtained good results of the input power factor of 0.95 and efficiency of 86%, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.2
• /
• pp.105-115
• /
• 2002

Since NUMA architecture has to access remote memory an interconnection network determines the performance of CC-NUMA system Bus which has been used as a popular interconnection network has many limits to build a large-scale system because of the limited physical scalabilty and bandwidth Dual ring interconnection network composed of high speed point-to-point links is made up for resolving the defects of the bus for large-scale system But it also has a problem that the response latency is rapidly increased when many node are attached to snooping based CC-NUMA system with dual ring In this paper we propose a chordal ring architecture in order to overcome the problem of the dual ring on snooping based CC-NUMA system and design and efficient link controller adopted to this architecture. We also analyze the effects of chordal ring architecture on the system performance and the response latency by using probability driven simulator.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.350-355
• /
• 2012

Past few years have seen the growing importance of micro shock tubes in various engineering applications. A pharma ballistic technique is one such application which uses micro shock tube to accelerate drug particles and penetrate into skin, thus avoiding the usual injection drug delivery system. But for the efficient design of such instruments requires the detailed knowledge of shock characteristics and flow field inside a micro shock tube. Due to many factors such as boundary layer, low Reynolds number and high Knudsen number shock propagation inside micro shock tubes will be quite different from that of the well established macro shock tubes. In the present study, experimental studies were carried out on a micro shock tube of 3 mm diameter to investigate flow characteristics and shock propagation. Pressure values were measured at different locations inside the driven section. From the experimental values other parameters like shock velocity, shock strength were found and shock wave diagram was constructed.

• Smart Structures and Systems
• /
• v.13 no.2
• /
• pp.281-303
• /
• 2014

In order to suppress the wind-induced vibrations of the Canton Tower, a pair of active mass driver (AMD) systems has been installed on the top of the main structure. The structural principal directions in which the bending modes of the structure are uncoupled are proposed and verified based on the orthogonal projection approach. For the vibration control design in the principal X direction, the simplified model of the structure is developed based on the finite element model and modified according to the field measurements under wind excitations. The AMD system driven by permanent magnet synchronous linear motors are adopted. The dynamical models of the AMD subsystems are determined according to the open-loop test results by using nonlinear least square fitting method. The continuous variable gain feedback (VGF) control strategy is adopted to make the AMD system adaptive to the variation in the intensity of wind excitations. Finally, the field tests of free vibration control are carried out. The field test results of AMD control show that the damping ratio of the first vibration mode increases up to 11 times of the original value without control.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.4
• /
• pp.167-174
• /
• 2005

The evaporation heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth horizontal stainless steel tube of 7.75 mm inner diameter. The experiments were conducted at mass flux of 200 to $500kg/m^2s$, saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed the evaporation heat transfer of $CO_2$ has greater effect on nucleate boiling than convective boiling. The evaporation heat transfer coefficient of $CO_2$ is highly dependent on the vapor quality, heat flux and saturation temperature. The evaporation heat transfer coefficient of $CO_2$ is very larger than that of R-22 and R-134a. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the correlation of Jung et al. But the existing correlations failed to predict the evaporation heat transfer coefficient of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in a horizontal tube.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.19-26
• /
• 2021

In fine-particle injection processing, hard fine particles, such as silicon carbide or aluminum oxide, are injected - using high-pressure air, and a small amount of material is removed by applying an impact to the workpiece by spraying at high speeds. In this study, a two-axis stage device capable of sequence control was developed to spray various shapes, such as circles and squares, on the surface during the micro-particle jetting process to understand the surface-shape micro-particle-processing characteristics. In the experimental device, two stepper motors were used for the linear movement of the two degree-of-freedom mechanism. The signal output from the microcontroller is - converted into a signal with a current sufficient to drive the stepper motor. The stepper motor rotates precisely in synchronization with the pulse-signal input from the outside, eliminating the need for a separate rotation-angle sensor. The major factors of the processing conditions are fine particles (silicon carbide, aluminum oxide), injection pressure, nozzle diameter, feed rate, and number of injection cycles. They were identified using the ANOVA technique on the design of the experimental method. Based on this, the surface roughness of the spraying surface, surface depth of the spraying surface, and radius of the corner of the spraying surface were measured, and depending on the characteristics, the required spraying conditions were studied.

• Journal of Korea Trade
• /
• v.23 no.3
• /
• pp.118-137
• /
• 2019

Purpose - As global trade disputes intensify and global trade uncertainty increases due to the prevailing trade protectionism all over the world, mega-FTAs such as the RCEP and CPTPP are suggested as strategic trade policy options for export-driven small open economies, such as Korea. This paper aims to provide a comprehensive analysis of Korea's mega-FTA participation and the induced implications for the Korean economy. Design/methodology - We use a multi-region, multi-sector global CGE model, and investigate the different effects of both the US-China and US-EU trade wars on the relative changes in GDP, welfare, and trade under different trade policy regimes; (i) Korea does not participate in any mega-FTA, (ii) Korea participates in the RCEP, and (iii) Korea participates in the CPTPP. Findings - We show, among others, that though industrial effects might be largely varied, the overall enlarging of free trade zones through multilateral mega-FTA participation may contribute significantly to the macroeconomic soundness and stability of Korea, even when global trade protectionism prevails. Under RCEP and CPTPP trade regimes, Korea's GDP may increase even when the global trade environment deteriorates as trade wars occur and intensify between the US and China, or between the US and EU. It is also estimated that RCEP participation increases Korea's GDP, welfare (measured in equivalent variation), and total trade by 1.12%, $1.09 billion, and 2.54%, respectively, while CPTPP participation increases them by 0.19%, $0.92 billion, and 0.13%, respectively. Originality/value - Existing studies usually focus on the direct impacts of mega-FTA participation on macroeconomic variables such as GDP, welfare, and trade, and do not consider the possible buffer effects of a mega-FTA when the global trade environment worsens. In this paper, we analyze and quantify not only the direct impacts of RCEP and CPTPP on the main macroeconomic variables but also the possible buffer effects of the RCEP and CPTPP in the cases of the US-China and US-EU trade wars.

• Journal of Korea Trade
• /
• v.24 no.8
• /
• pp.39-62
• /
• 2020

Purpose - Korean exports account for a vast proportion of Korean GDP, and large volumes of Korean products are sold in the United States. Identifying and characterizing actual and potential product hazards related to Korean products is critical to safeguard Korean export trade, as severe quality issues can impair Korea's reputation and reduce global consumer confidence in Korean products. In this study, we develop country-of-origin-based product risk analysis methods for social media with a specific focus on Korean-labeled products, for the purpose of safeguarding Korean export trade. Design/methodology - We employed two social media datasets containing consumer-generated product reviews. Sentiment analysis is a popular text mining technique used to quantify the type and amount of emotion that is expressed in the text. It is a useful tool for gathering customer opinions regarding products. Findings - We document and discuss the specific potential risks found in Korean-labeled products and explain their implications for safeguarding Korean export trade. Finally, we analyze the false positive matches that arise from the established dictionaries that were used for risk discovery and utilize these classification errors to suggest opportunities for the future refinement of the associated automated text analytic methods. Originality/value - Various studies have used online feedback from social media to analyze product defects. However, none of them links their findings to trade promotion and the protection of a specific country's exports. Therefore, it is important to fill this research gap, which could help to safeguard export trade in Korea.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.23-34
• /
• 2018

This paper presents the high efficiency and high power-factor power supply for LED lighting equipment. The proposed power supply is the single-stage power structure consisted of the full-bridge diode rectifier and flyback converter, and thus the power-factor correction and output voltage regulation are performed simultaneously using only one controller IC and one power semiconductor switch. Furthermore, the proposed power supply reduces the voltage stress and switching loss of main switch using the regenerative snubber, and it improves the system efficiency using the synchronous rectifier. The applied synchronous rectifier is the new voltage-driven type and its operation and construction are simple. In this paper, the operation principle of proposed power supply is explained through the operation analyses of its power-factor correction and main power conversion parts and the operation of synchronous rectifier is described, briefly. Also, a design example of the power circuit of 40W-class prototype is shown and the operation characteristics of proposed power supply are validated through the experimental results of the implemented prototype by the designed circuit parameter.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.865-889
• /
• 2019

The need for cyber resilience is increasingly important in our technology-dependent society where computing devices and data have been, and will continue to be, the target of cyber-attackers, particularly advanced persistent threat (APT) and nation-state/sponsored actors. APT and nation-state/sponsored actors tend to be more sophisticated, having access to significantly more resources and time to facilitate their attacks, which in most cases are not financially driven (unlike typical cyber-criminals). For example, such threat actors often utilize a broad range of attack vectors, cyber and/or physical, and constantly evolve their attack tactics. Thus, having up-to-date and detailed information of APT's tactics, techniques, and procedures (TTPs) facilitates the design of effective defense strategies as the focus of this paper. Specifically, we posit the importance of taxonomies in categorizing cyber-attacks. Note, however, that existing information about APT attack campaigns is fragmented across practitioner, government (including intelligence/classified), and academic publications, and existing taxonomies generally have a narrow scope (e.g., to a limited number of APT campaigns). Therefore, in this paper, we leverage the Cyber Kill Chain (CKC) model to "decompose" any complex attack and identify the relevant characteristics of such attacks. We then comprehensively analyze more than 40 APT campaigns disclosed before 2018 to build our taxonomy. Such taxonomy can facilitate incident response and cyber threat hunting by aiding in understanding of the potential attacks to organizations as well as which attacks may surface. In addition, the taxonomy can allow national security and intelligence agencies and businesses to share their analysis of ongoing, sensitive APT campaigns without the need to disclose detailed information about the campaigns. It can also notify future security policies and mitigation strategy formulation.