• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.46-52
• /
• 2014

This study suggests a small-sized screw decanter specialized for dredging sites. Generally, conventional screw decanters are composed of a cylinder and a cone. However, the suggested screw decanter simply has a cone based on a cone-type bowl structure. In this research, a commercial analysis tool is used to establish an optimal design for the bowl and the screw conveyor. Moreover, the base frame, where the main bearings that support the spindle of the bowl and the screw conveyor are installed, is optimally designed considering the weight of the rotating body and the deflection caused by the high centrifugal force. Furthermore, the natural frequency range of the spinning body, the bowl and the screw conveyor, is applied to this base frame; it is designed not to correspond to the resonance frequency range and achieves stability as a result. This study suggests an optimal design for the rotating body and the base frame of a screw decanter considering its vibration characteristics. Such a design will prevent overuse of materials and help to reduce the weight and volume-and the price-of a screw decanter.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.642-651
• /
• 2009

The history of excavator design is not long enough which still causes most of the design considerations to be focused on static analysis or simple functional improvement based on static analysis. However, the real forces experiencing on each component of excavator are highly transient and impulsive. Therefore, the prediction and the evaluation of the movement of the excavator by dynamic load in the early design stage through the dynamic transient analysis of the excavator and ensuring of design technique plays an importance role to reduce development-cost, shorten product-deliver, decrease vehicle-weight and optimize the system design. In this paper, Commercial software DADS and ANSYS help to develop the track model of the crawler type excavator, and to evaluate the performance and the dynamic characteristics of excavator with various simulations. For that reason, the track of crawler type excavator is modelled with DADS Track Vehicle Superelement, and the reaction forces on the track rollers were predicted through the driving simulation. Also, the upper frame and cabin vibration characteristics, at the low RPM idle state, were evaluated with engine rigid body modelling. And flexibility body effects were considered to determine the more accurate joint reaction forces and accelerations under the upper frame swing motion.

• 대한가정학회지
• /
• 제39권11호
• /
• pp.15-26
• /
• 2001

China adopted a free market economy and is a member of WTO. It has now emerged as one of the most promising markets in the word for the near future. The purpose of this study was to investigate of Chinese women clothing behavior and preference of clothing design by body types and to suggest basic information for high quality clothes merchandising of exporting to China. The subjects in this study were 280 Chinese women, aged from 20 to 50 living in Beijing. The survey was taken from June to July, 1999. SAS(Statistical Analysis System) is used for frequency, percentage, average, standard deviation, $\chi$$^2$-test, factor analysis. The results of this study are as follows. Ewamination on the Chinese womens clothing behavior showed that they attach importance to economy for purchasing clothes and have affirmative self-confidence. The thin body type women prefer to fashionable clothes while the fat body type has more reasonable economic behavior for clothing. It is needed to different merchandising project by body type in China..

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2919-2926
• /
• 2023

In this paper, rare earth element (REE)/polyester composites were designed with lanthanum oxide, gadolinium oxide, and lutetium oxide as ray shielding agents, and polyethylene terephthalate (PET) as the base. Monte Carlo simulation was carried out using FLUKA software. We found that the radiation protection performance of the composite is affected by the type and amount of REE; a higher amount of REE equated to a better radiation protection performance of the composite. When the thickness of the composite and total thickness of the REE is constant, the number of superimposed layers inside the composite does not affect its shielding performance. Compared with a single-type REE/PET composite, a mixed-type REE/PET composite has a wider range of γ-ray absorption and better radiation protection performance. When the mass ratio of PET to REE is 2:8 and different types of REE are mixed with equal mass, several 0.2 cm-thick mixed-type REE/PET composites can shield >70% of 60 and 80 KeV γ-rays.

• 패션비즈니스
• /
• 제26권2호
• /
• pp.67-82
• /
• 2022

This study was aimed to investigate the differences in satisfaction and repurchase intention of leggings focused on women who have ever worn leggings. The participants were women in their 10s-50s who were residing in Busan and Gyeongnam, Korea. The survey was taken between July 3rd and 28th, 2021. A total of 313 questionnaires were completed and used in the statistical analysis. The data were analyzed with 𝛘²-test, t-test, ANOVA, etc. using the SPSS. The leggings wearing by demographic characteristics were significantly different for age, monthly income, and occupation. The factors related to leggings postpurchase satisfaction were identified as reshaping body type and utilization, wearing sensation and functionality, design and price, colorfastness to laundry, and quality. As a result of analyzing the difference for leggings postpurchase satisfaction by demographic characteristics, colorfastness to laundry, and quality were significantly different by marital status, reshaping body type and utilization, design and price, and colorfastness to laundry, and quality were significantly different by age. All postpurchase satisfaction factors were significantly different by monthly income. Design and price, colorfastness to laundry, and quality were significantly different by occupation. The variables influencing the level of leggings satisfaction were wearing sensation and functionality, followed by design and price, reshaping body type and utilization, and colorfastness to laundry and quality. The repurchase intention of leggings was significantly different by age and monthly income. The variables influencing repurchase intention of leggings were design and price, followed by reshaping body type and utilization.

• 한국실내디자인학회논문집
• /
• 제26권5호
• /
• pp.34-41
• /
• 2017

It is necessary to conduct a basic research on fusion of ighting design or lighting environment to improve the health and quality of life of elderly people. The purpose of this study is to analyze the lighting situation of elderly people 's residential facilities in terms of space environment design plan and to analyze the trends in smart home, design and technology. It is to provide basic data for the prototype of lighting fixtures for elderly people living facilities considering functional, physiological and emotional characteristics. For the study, the target sites were selected and the results of the illumination survey of the target facilities were divided into two types of spaces, residential and other public spaces, and their location, lighting fixtures' type, color temperature, illuminance. The results of the survey showed that the overall physical illumination compared to the recommended illuminance for the elderly satisfied the recommended range and provided the appropriate brightness for the elderly. However, in the application layout of the lighting fixtures, a monotonous arrangement and a lighting fixtures type consisting entirely of simple square type fixtures and downlight types were applied. It would be desirable to use different types of lighting fixtures in the design for various functions, such as making the environment more comfortable. Future research will propose a prototype for the design direction of the subdivided lighting fixtures that classify the space according to functions and understand the vision problem of the elderly while aesthetically.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.211-215
• /
• 2006

This paper presents a new structure for the universal motor using soft magnetic composite (SMC). The stator for this new type of motor is made by combination of the SMC pole and the silicon steel yoke. The shape of the 3D SMC pole is designed to minimize ohmic loss and amount of stator coil. To design the pole shape, the 3D analysis in the design procedure is replaced with an equivalent 2D analysis. Finally, the optimal shape is analyzed by 3D FEM and the performance is discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.711-714
• /
• 2004

A new design for improving the aperture ratio of bottom emission type AMOLED is investigated. In conventional, the TFT of AMOLED fabrication method is "Etch Stopper (7-mask)", so the aperture ratio is limited in 28${\sim}$33% by Cs(Storage Capacitor). A high aperture ratio TFT is designed by using BCE(Back Channel Etching 5-mask) fabrication way and the aperture ratio is up to 40% shown in 2.2"AMOLED display.

• 한국관개배수논문집
• /
• 제2권1호
• /
• pp.20-29
• /
• 1995

It was attempted to get an optimal method for the prediction of design low flows among derivation . techniques of design low flows. Derivation techniques of design low Hon used in this study are Type III extremal, Gumbel-Chow distribution, SMEMAX(Small, M

• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.939-950
• /
• 2003

Control charts are very useful tool for monitoring of process characteristics. This paper discusses the problem of design of control limits when the subgroups are composed by cluster sampling type. As an alternative method of design of control limits XbBar chart is proposed, which uses the control limits based on the variation between subgroups instead of using classical variation within subgroups. Two examples are presented for reasonable design of control limits and conditions of subgroups based on the cluster sampling. Through examples the guidelines for making proper control limits are proposed.