• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.109-121
• /
• 2004

This paper presents an optimal design method for structure-borne durability of a vehicle body structure. Structure-borne durability design requires a new design that can increase fatigue lives of critical areas in a structure and must prohibit transition phenomenon of critical areas that results from modification of the structure at the same time. Therefore, the optimization problem fur structure-borne durability design are consists of an objective function and design constraints of 2 types; type 1-constraint that increases fatigue lives of the critical areas to the required design limits and type 2-constraint that prohibits transition phenomenon of critical areas. The durability design problem is generally dynamic because a designer must consider the dynamic behavior such as fatigue analyses according to the structure modification during the optimal design process. This design scheme, however, requires such high computational cost that the design method cannot be applicable. For the purpose of efficiency of the durability design, we presents a method which carry out the equivalent static design problem instead of the dynamic one. In the proposed method, dynamic design constraints for fatigue life, are replaced to the equivalent static design constraints for stress/strain coefficients. The equivalent static design constraints are computed from static or eigen-value analyses. We carry out an optimal design for structure-borne durability of the newly developed bus and verify the effectiveness of the proposed method by examination of the result.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.81-90
• /
• 1993

The optimum design of a structure requires the determination of the economical member size and shape of the structure which satisfies the design condition and function. In this study, the process of design automatization of three-dimensional truss structure introduces the optimization technique tests its application in the design automatization, proposes its application method and applies the example structure of the parabolic antenna truss. Using the Formex Algebra of configuration function, the structure's mesh-generation is automatized. By using the program developed in this study, the input member array, member size and load condition designer can generate the input data file for the structure analysis and optimum design. This study is aimed at the development of a design automatization system that search for tile optimum value of a structure design by observing the structure's sensitivity from the modification of member array and member property.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.45-53
• /
• 2016

This work is mainly done by too many manual operations in the aircraft structure design process resulting in heavy workload, low efficiency and quality, non-standardized processes and procedures. A top-down associated design method employing the template parametric technology is proposed here in order to improve the quality of design and efficiency of aircraft wing structure at the preliminary design stage. The appropriate parametric tool is chosen and the rapid design system of knowledge-driven aircraft wing structure is developed. First, a skeleton model of aircraft wing structure is rapidly built up through the template encapsulated design knowledge. Associated design is then introduced to realize the association between the typical structural part and skeleton model. Finally, the related elements are referenced from skeleton model, and a typical structural part reflecting an automatic response for design changes of the upstream skeleton model is quickly constructed within the template. The rapid design system proposed and developed in this paper is able to formalize the design standardization of aircraft wing structure and thus the rapid generation of different aircraft wing structure programs and achieve the structural design knowledge reuse as well.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.146-152
• /
• 2019

A design system was developed for the doubler plate of a ship structure simultaneously subjected to in-plane loads and lateral pressure based on general dimensions and those of a representative ship structure. An equivalent design equation that considers various structural design parameters was derived by introducing the equivalent plate thickness theory, and the design of the doubler plate reinforcement of the ship structure was developed. A hybrid structural design system was established for a doubler plate simultaneously subjected to in-plane loads and lateral pressure consisting of two modules: an optimized design module and a double plate strength & design review module. The practical application of this design system was illustrated to show its usability. It was found that the design safety of the doubler plate was ensured, and this system could be used as an initial design guide to review the double plate reinforcement for a dent or corrosion of the ship plate members. Using the developed design system would make it possible to obtain a more reasonable doubler plate structure that considers the rational reinforcement of plate members of ship structures. In addition, a more reliable structural analysis using a strength evaluation process can be performed to verify the efficiency of the optimum structural design for the doubler plate structure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1036-1041
• /
• 2007

In this paper, we studied the optimized design of roof structure to be separable roof structure. Also, the design have to satisfy with the GM/RT 2100' missile protection tests to verify the safety of railway vehicle structure. The separable roof structure design could have easier assembly process than whole roof structure in case of the interior outfitting and so on. Optimized design have to have as good as whole roof structure about results from the structure analysis. We studied separable roof structure to be optimized along with GM/RT 2100. The separable roof structure showed that the results have the same level of structure analysis

• 한국CDE학회논문집
• /
• 제17권5호
• /
• pp.364-374
• /
• 2012

In this paper, we proposed a data structure to represent structural components of solid rocket motors (SRM) in an automated design program. To propose the data structure, we searched the necessary functions for the automated design program should have. In order to design the structural components of solid rocket motors sufficiently with a design program, it should have the functions to represent the shapes of the components, the drawing and analysis models, the design variables, various product structures, interferences, characteristic properties, design equations, and tightening sets. By modifying the data structure of an element object that is a general purpose data structure to represent a general component of a product, a new data structure was proposed to satisfy all the necessary functions with optimum. Finally, a design program for the structural components of solid rocket motors was developed successfully with the proposed data structure.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.15-21
• /
• 2002

A control-structure combined optimal design problem is discussed taking a 3-D truss structure as a design object. We use descriptor forms for a controlled object and a generalized plant because the structural parameters appear naturally in these farms. We consider not only minimum weight design problem for structure system, but also suppression problem of the effect of disturbances for control system as the purpose of the design. A numerical example shows the validity of combined optimal design of structure and control systems. We also consider the validity of sensor-actuator collocation for control system design in this paper.

• 동력기계공학회지
• /
• 제8권1호
• /
• pp.69-74
• /
• 2004

A structure-control combined optimal design problem is discussed taking a 3-D truss structure as a design object. We use descriptor forms for a controlled object and a generalized plant because the structural parameters appear naturally in these forms. We consider not only minimum weight design problem for structure system, but also suppression problem of the effect of disturbances for control system as the purpose of the design. A numerical example shows the validity of combined optimal design of structure and control systems. We also consider the validity of sensor-actuator collocation for control system design in this paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.421-426
• /
• 1999

The purpose of this study is to investigate the durability design method of reinforced concrete structure in order to establish a rationally combined design system of structural and durability design, that is to say performance-based design. In literature study, the integrated design of concrete structure studied JCI committe is very intensive durability design method for reinforced concrete structure. Specially, B root durability design method for selection of verification level is very effective method in the view of modeling of materials and structural properties to analyze safety and serviceability of RC structures.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2626-2631
• /
• 2011

In recent carbody design of rolling stocks, the development of a new carbody structure rather than designing the carbody structure by applying a proven new way to design the carbody structure has been applied. Structural requirements of the carbody being equal, the same applies to the carbody structure means that it is possible to design a carbody structure. By kinematic envelope & speed and the environment, etc., the carbody design is in progress. Accordingly, if all conditions are the same as the existing carbody structure by the same criteria is that you can go get the same. Rather than developing a new carbody structure, carbody structure by applying proven that safety is secured is made possible. Proven standard model of the carbody structure of rolling stocks to secure a new carbody design has made it possible to apply. In addition, the size of the different carbody but structural requirements are the same body design is easier to be expected. In this paper, a model standard carbody of rolling stocks is chosen and of a new carbody design that can be applied to the carbody design will attempt to demonstrate the case.