Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지
DOI QR코드

DOI QR Code

Data Structure for the Design Program of Solid Rocket Motors

고체 추진기관 구조체 설계 프로그램 개발을 위한 설계 부품 자료 구조

  • Lee, Kang-Soo (Department of Mechanical Engineering, Hanbat Nat'l University) ;
  • Kim, Won-Hoon (Division 1-6, Agency for Defense Development) ;
  • Lee, Bang-Eop (Division 1-6, Agency for Defense Development)
  • Received : 2012.05.14
  • Accepted : 2012.08.10
  • Published : 2012.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we proposed a data structure to represent structural components of solid rocket motors (SRM) in an automated design program. To propose the data structure, we searched the necessary functions for the automated design program should have. In order to design the structural components of solid rocket motors sufficiently with a design program, it should have the functions to represent the shapes of the components, the drawing and analysis models, the design variables, various product structures, interferences, characteristic properties, design equations, and tightening sets. By modifying the data structure of an element object that is a general purpose data structure to represent a general component of a product, a new data structure was proposed to satisfy all the necessary functions with optimum. Finally, a design program for the structural components of solid rocket motors was developed successfully with the proposed data structure.

Keywords

References

  1. Jacques, L. and Roux, J., 1983, Computer Aided Preliminary Design Solid Rocket Motors, AIAA 83-1254.
  2. Jacques, L. and Legagneux, D., 1987, Computer Aided Preliminary Design of ARIANE 5 Solid Rocket Motors, AIAA 87-1738.
  3. Clegern, J.B., 1994, Computer Aided Solid Rocket Motor Conceptual Design and Optimization, AIAA 94-0012.
  4. Larrieu, J.M. and Jacques, L., 1996, Preliminary Design Procedure of Solid Rocket Motors at Societe Europeenne de Propulsion (S.E.P), AIAA 96-2902.
  5. Kim, W.-H., Koo, S.-H., Moon, S.-I., Hwang, K.-Y., Lee, K.-S. and Seok, J.-H., 2006, Development of Automatic Design Program for Solid Rocket Motors Structure, Transactions of the Korean Society of Propulsion Engineers, 10(3), pp. 18-25.
  6. Uhrig, G., Ducourneau, B. and Liesa, P., 1987, Computer Aided Preliminary Design of Propellant Grains for Solid Rocket Motors, AIAA 87- 1734.
  7. Kim, B.-H., Lee, K.-S., Yang, J.S., Lee, D. H., Oh, S.J., Kwon, H.-S. and Kim, S.H., 2008, Development of a Solid Fuel Design Automation Program Using Configuration Design Method, Transactions of the Society of CAD/CAM Engineers, 13(5), pp. 372-381.
  8. Lee, K.-S., Kim, W.-H., Hwang, T.-K., Bae, J.C., Yang, J.-S., Lee, D.H., Seok, J.-H., Choi, B.-W. and Kwon, H.-S., 2008, Development of an Integrated Design System for Solid Rocket Motors, Proceedings of the Korean Society of Propulsion Engineers Conference.
  9. Jung, D., Jung, T., Jung, Y., Cho, I., Lee, H., Kim, J. and Oh, S., 2006, Liquid Propulsion System CAD Modeling of KSR-III, Proceedings of the Society of CAD/CAM Engineers Conference, pp. 777-781.
  10. Jung, D., Jung, T., Kim, J., Lee, H. and Oh, S., 2007, Weight Management of KSR-III Propulsion System using CAD Model, Proceedings of the Society of CAD/CAM Engineers Conference, pp. 687-690.
  11. Lee, K.-S., 2011, Development of a Compressor Design System Using Configuration Design Method, Transactions of the Society of CAD/ CAM Engineers, 16(1), pp. 52-60.
  12. Lee, J.-M. and Han, S.-H., 2000, Configuration Design of Products Using Commercial Part Databases, Proceedings of the Society of CAD/CAM Engineers Conference, pp. 117-122.
  13. Kang, C.S. and Han, S.H., 1997, Parametric Design of a Car Audio Based on Configuration Design Method, Transactions of the Society of CAD/CAM Engineers, 2(4), pp. 276-285.
  14. Lee, K.-S. and Lee, K., 2001, Framework of an Evolutionary Design System Incorporating Design Information and History, Computers in Industry, 44(3), pp. 205-227. https://doi.org/10.1016/S0166-3615(01)00075-6
  15. Lee, K.-S. and Lee, K., 2004, Evolutionary Design and Re-design Using Design Parameters and Goals, Journal of Engineering Design, 15(2), pp. 155-176. https://doi.org/10.1080/0954482031000150170
  16. Sycara, K., NavinChandra, D., Guttal, R., Koning, J. and Narashimhan, S., 1992, CADET: A Case-based Synthesis Tool for Engineering Design, International Journal of Expert Systems, 4(2), pp. 157-188. https://doi.org/10.1016/0957-4174(92)90050-3
  17. Maher, M.L. and Chang D.M., 1993, CADSYN: A Case-based Design Process Model, AI EDAM, 7(2), pp. 97-110.
  18. Goel, A., Bhatta, S. and Stroulia, E., 1996, KRITIK: An Early Case-based Design System, In Issues and Applications of Case-Based Reasoning to Design (Maher, M.L. and Pu, P. Eds.), Hillsdale, NJ: Erlbaum.
  19. Han, Y. and Lee, K., 1998, Generation of Concept Variants in Mechanism Design using Case-Based Reasoning, Proceedings of Korean Society for Precision Engineering Conference, pp. 686-691.
  20. Lee, K.-S., Kim, W.-H. and Seok, J.-H., 2010, Design for Fasteners for Solid Rocket Motor Using Solid CAD System, Transactions of the KSME-A, 34(7), pp. 805-811.