• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.184-192
• /
• 2005

The best way to express space effectively on internet is to use 3D VR(Virtual Reality) contents. But it is too difficult to control the 3D VR space with the 2D device. So the content makers cannot solve this problem easily. Besides they define the UI control in their own subjective way which makes the users confused. The purpose of this study is to present the grounds for the Control UI standardization by studying the deriving improvement direction. First of all, we categorize current control UI designs for space-VR on web service by controlling method features into three Types. Next we itemize the main improvement direction that is based on our analysis. First, the UI design that maintains for a typical 2D Input Device method to help the beginner users. Secondly, the concise UI that allows users to Immerse easily in VR. Thirdly, the control level construction that satisfies both users who are skillful at 3D games and users who have little experience with these devices. In this way, we propose the most suitable control UI model that satisfies these improvement directions. We expect the result of our study to serve as an important basis for the standardization of VR services.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.3
• /
• pp.40-71
• /
• 1986

By developing a computer program for the systematic design of worm gears, the design formulae and tables of AGMA, JGMA, BS and DIN are analized and compared. The computer program can be used on micro-computers. According to the input data of the reduction ratio, the center distance. the driving torque and the material as design parameters, the program calculate the most efficient worm gear dimension. The variation of the design parameters and other empirical coefficients in case of resulting an inadequate design gear dimension can be easily modified throuth the way of interactive method between the user and the monitoring system of computer. A proposal of the standardization of worm gears was made in which a standard module according to the DIN 323 standard series number was applied. For the more exact and effective calculation of the stress concentration and the deformation of gear teeth, a computer program using the boundary element method is also developed. Even the strength of the special gear shape such as Niemann's "Cavex" gear can be calculated in a short CPU-time. The most effort of this study has been layed on the developing a computer program for the correction of a tooth profile and face width which is most important design factor for an exact and wide teeth contacts under loads, especially by great and wide gears. For this purpose were investigated the tooth stiffness, the mesh interferences and the kinematics and the dynamics of gear mesh. The deflection and the deformation of the gear shaft due to the loads acting on gear and shaft were aslo considered. Some examples have shown the sufficient good status of teeth contact in which the correction of the tooth profile and face width were accomplished due to the calculated results.d results.

• Journal of Forest and Environmental Science
• /
• v.22 no.1
• /
• pp.50-57
• /
• 2006

The design instruction put in the wood structure construction manual of forest engineering works issued in Japan in 2004 is composed of the introduction, the use and characteristic of wood, investigation, planning, design, and etc. We analyzed planing and construction. By the results, the contents for the design are shown about applied woody conditions and deterioration, structure, selection of tree, the standardization of the size displays in wood, safety and examination of intensity, intensity of wood, the ranges of wood size allowance, and etc. With respect to the construction of wood structure, there are detailed descriptions regarding security of wood quality, confirmation of wood quality by preservative treatment and security methods of function in wood structure, the regular investigation method, the qualitative standard criterion and the quantitative examination method on the deterioration of wood.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.349-355
• /
• 2014

In semiconductor IP reuse, precise understanding of semiconductor IP interfaces is essential for integrated chip design. However, in general, these interfaces are described in the original designer's description style. Furthermore, their description method are not unified, so it is very difficult for the chip integration designer to understand them. This paper proposes a standardized description method of semiconductor IP interfaces. It consists of 9 items such as IP information, description level, model provision, data type, interface information, port information, signal information, protocol information, and source file. The proposed method helps the chip integration designer to understand semiconductor IP interfaces and to integrate them into a single chip.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.5
• /
• pp.637-646
• /
• 2011

This study is related to the development of a design automation system for the construction design phase of steel structures. The system intended for beam splice friction connections using high-strength bolts. The standard design method and standardization principles that are suggested in the design manual for standard connections using high-strength bolts published by the Korean Society of Steel Construction(KSSC) were reviewed. A structural analysis algorithm was formulated from the review. A design automation system that can automatically calculate the structural design of connections and automatically generate the connection model without separate inputs was developed. To verify the validity of the developed system, its results were compared with the date in the table for the connection design in the Design Manual. The development system was also applied to the sample model. Then the structural design results were compared with the properties of the connection models and drawings created from the results.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.343-352
• /
• 2011

For optimizing railroad designs, setting up shape and specifications of facilities harmonized and coincide with local topography based on absolute location information, correct construction quantity's output and proper land's security etc are key matters, and also clear and advanced surveying standards and technical provision shall become priority so as to satisfy them. Therefore, this study analyzed and researched on surveying standards and technical provision's status in current railroad design's cases, and then attempts to suggest establishment of design surveying standard, procedures, and methods together with its practical scheme.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1087-1094
• /
• 2004

Normally, formalization and standardization are followed while doing any system analysis and design. But, in actual system development, products can't be written using the automated tool for all products due to their own characteristics. That results the inconsistency among development products and various kinds of problem can occur in the products. In this paper, we present a technique that supports consistency among products of analysis and design phase developed according to object oriented method. And, this paper also presents the implementation tool.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.22-30
• /
• 2004

It is an attempt to suggest the standard valuation method of the environmental illumination for the bridges across the Han-river from an aesthetic point of view, deviating from the technical and traditional viewpoint. In Korea the current evaluation criterion to verify the value of bridge design has a partiality for the technical and structural safety rather than the sentient beauty on the whole. However, the recently cultural reform of Korean mass society with the elevation of the standard of living forces the engineering designers for bridges to focus not only on competing physical structures but also on enhancing the formative beauty including the illumination effects for night view. Additionally, the new policy, which transforms the environments around the Han-river into the major tourist attractions has been executing strongly by the city authorities to revitalize the symbolic, historic, and cultural identity of the capital city with the introduction of the high-quality environmental illumination for the bridges. As a result, It becomes necessary to establish the manual and standardization of the environmental illumination planning for the city in terms of the formative beauty, and this study is to suggest the valuation model method of the environmental illumination for the bridges as the initial step of the standardization. In the study, the valuation items of the standard questionnaire are selected by the documentary records and the consultation of various experts in architecture, design, fine art, urban planning and even administration to verify the essential elements of the aesthetic beauty with the local amenity and the environmental harmony for the chosen bridges across the Han-river.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.262-268
• /
• 2010

Organic light emitting diode is developed fast from 1963 after discovering electric light emitting phenomenon. First PMOLED(passive matrix OLED) product is manufactured and AMOLED(active matrix OLED) using TFT(thin film ransistor) is now in the center. PMOLED is mainly mounted at sub display. but AMOLED is mounted at main display. Also AMOLED expand the market to PMP(portable multimedia players), navigation and TV. Even thought OLED's market is opening to many applications, OLED is worried about lifetime until now. That's appeared in market in a very short time and is not known well about result of OLED's lifetime and reliability test. And there is no standard ssessment method and not enough study to standardization the method. A study's purpose is reduce the time for life test by accelerated current and it can do production possible design by accelerated life model in design phase. It's must be add to process variables and design variables(like ratio of light emitting, organic material structure, condition of aging, etc) to make the best use of supplied accelerated lifetime model in this paper. In terms of lifetime it needs each criterion of applications because of image sticking. In conclusion, it's possible to discover new defect because there is not much time to be opened in market and develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.