• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.365-378
• /
• 2022

Complete blood cell count(CBC) is a technique that counts leukocytes for each type of blood cell being analyzed. The principle is that laser is incident to ex vivo flowing leukocytes in a microcapillary tube and scattered light occurs by laser and leukocytes. By collecting the scattered light, we can count the types of cells because different cells generate different light-scattering patterns. However, the technique has an intrinsic limitation, scattering pattern is shown in a wide range region in the resulting, which makes it difficult to accurate analyze and use fluorescent dyes. To overcome this limitation, a new design of CBC with a dual laser, which irradiates with orthogonal angles for collecting quad-scattering information was proposed. Before development, the scattering difference depending on wavelength must be investigated to only catch up to the scattered signal by angles. Some studies, which focused on simple particles, have been conducted to theoretically and experimentally investigate different scatterings by wavelength. In this study, we propose an optical system for measuring scattered light and investigate a complex particle. As a result, the green laser made strong scattering signals in both the forward and side direction: 10% and 30%, respectively.

• Structural Monitoring and Maintenance
• /
• 제9권1호
• /
• pp.29-42
• /
• 2022

In mountainous areas of China, concrete poles with connectors are widely employed in power transmission due to its convenience of manufacture and transportation. The bearing capacity of the poles must have degenerated over time, and most of the steel connectors have been corroded. Carbon fiber reinforced polymer (CFRP) offers a durable, light-weight alternative in strengthening those poles that have served for many years. In this paper, the bearing capacity and failure mechanism of CFRP sheet strengthened existing reinforced concrete poles with corrosion steel connectors were investigated. Four poles were selected to conduct flexural capacity test. Two poles were strengthened by single-layer longitudinal CFRP sheet, one pole was strengthened by double-layer longitudinal CFRP sheets and the last specimen was not strengthened. Results indicate that the failure is mainly bond failure between concrete and the external CFRP sheet, and the specimens fail in a brittle pattern. The cross-sectional strains of specimens approximately follow the plane section assumption in the early stage of loading, but the strain in the tensile zone no longer conforms to this assumption when the load approaches the failure load. Also, bearing capacity and stiffness of the strengthened specimens are much larger than those without CFRP sheet. The bearing capacity, initial stiffness and elastic-plastic stiffness of specimen strengthened by double-layer CFRP are larger than those strengthened by single-layer CFRP. Weighting the cost-effective effect, it is more economical and reasonable to strengthen with single-layer CFRP sheet. The results can provide a reference to the same type of poles for strengthening design.

• Advances in concrete construction
• /
• 제14권1호
• /
• pp.45-55
• /
• 2022

In this article, the flexural and shear capacity of ultra-high-performance fiber-reinforced concrete beams (UHPFRC) using two kinds of rebars, including GFRP and steel rebars, are experimentally investigated. For this purpose, six UHPFRC beams (250 × 300 × 1650 mm) with three reinforcement ratios (ρ) of 0.64, 1.05, and 1.45 were constructed using 2% steel fibers by volume. Half of the specimens were made of UHPFRC reinforced with GFRP rebars, while the other half were reinforced with conventional steel rebars. All specimens were tested to failure in four-point bending. Both the load-deformation at mid-span and the failure pattern were studied. The results showed that utilizing GFRP bars increases the flexural strength of UHPFRC beams in comparison to those made of steel bars, but at the same time, it reduces the post-cracking strain hardening. Furthermore, by increasing the percentage of longitudinal bars, both the post-cracking strain hardening and load-bearing capacity increase. Comparing the experiment results with some of the available equations and provisions cited in the valid design codes reveals that some of the equations to predict the flexural strength of UHPFRC beams reinforced with conventional steel and GFRP bars are reasonably conservative, while Khalil and Tayfur model is un-conservative. This issue makes it essential to modify the presented equations in this research for predicting the flexural strength of UHPFRC beams using GFRP bars.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1135-1145
• /
• 2022

Due to increase in concerns related to the climate change, state-wide promotion of the carbon neutrality has been in progress thus far. Smart City could be one of the measures as the initiative to mitigate the missions process. The primary purpose of Smart City can be summarized to be maximization of the social net-beneift to be returned for the local citizens and derivation of the optimal pattern of the energy consumption could belong to one of the elements included in the net-benefit. Currently, the energy consumption by the buildings has been determined to be responsible for the greatest consumption among the sectors considered to be energy-intensive. Moreover, considering the fact that the consumption by operations of HVAC is responsible for nearly 40% in the commercial buildings, it is virtually not possible to optimize schedules for the energy consumption with considerable deliverables from the perspective of the urban planners. Thus, the methods to implement the optimal schedules for the HVAC commissioned with the OHUs were concluded to be the suitable candidate resources for the simulation by EnergyPlus capable of monitoring the thermal changes in each subject space in the present research.

• 한국정보시스템학회지:정보시스템연구
• /
• 제31권3호
• /
• pp.47-65
• /
• 2022

Purpose With the recent development of Big Data and Artificial Intelligence technology, self-driving technology has developed into three stages (partial self-driving) or four stages (conditional self-driving), it is expected to bring a new paradigm to transportation in the city. Although many researchers are researching related technologies, there is no research on self-driving for disabled persons. In this study, the basic research was conducted based on the assumption that the shared self-driving car used by the disabled person is similar to the special transportation currently driving. Design In this study, data analysis and machine learning techniques were utilized to analyze the mobility patterns of disabled persons by type and to search for leading factors affecting the traffic volume of special transportation. Findings The study found that external physical disorders and developmental disorders often visit general welfare centers, internal organ disorders often visit general hospitals, and the elderly and mental disorders have various destinations. In addition, machine learning analysis showed that the main transportation routes for the disabled person use arterial roads and auxiliary arterial roads and that the ratio of building usage-related variables affecting the use of special transportation for a disabled person is high. In addition, the distance to the subway and bus stops was also mentioned as a meaningful variable. Based on these analysis results, it is expected that the necessary infrastructure for shared self-driving cars for disability person traffic will be used as meaningful research data in the future.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.790-798
• /
• 2008

Counter-rotating axial flow fan(CRF) consists of two counter-rotating rotors without stator blades. CRF shows the complex flow characteristics of the three-dimensional, viscous, and unsteady flow fields. For the understanding of the entire core flow in CRF, it is necessary to investigate the three-dimensional unsteady flow field between the rotors. This information is also essential to improve the aerodynamic characteristics and to reduce the aerodynamic noise level and vibration characteristics of the CRF. In this paper, experimental study on the three-dimensional unsteady flow of the CRF is performed at the design point(operating point). Flow fields in the CRF are measured at the cross-sectional planes of the upstream and downstream of each rotor using the $45^{\circ}$ inclined hot-wire. The phase-locked averaged hot-wire technique utilizes the inclined hot-wire, which rotates successively with 120 degree increments about its own axis. Three-dimensional unsteady flow characteristics such as tip vortex, secondary flow and tip leakage flow in the CRF are shown in the form of the axial, radial and tangential velocity vector plot and velocity contour. The phase-locked averaged velocity profiles of the CRF are analyzed by means of the stationary unsteady measurement technique. At the mean radius of the front rotor inlet and the outlet, the phase-locked averaged velocity profiles show more the periodical flow characteristics than those of the hub region. At the tip region of the CRF, the axial velocity is decreased due to the boundary layer effect of the fan casing and the tip vortex flow. The radial and the tangential velocity profiles show the most unstable and unsteady flow characteristics compared with other position of rotors. But, the phase-locked averaged velocity profiles of the downstream of the rear rotor show the aperiodic flow pattern due to the mixture of the front rotor wake period and the rear rotor rotational period.

• 대한물리치료과학회지
• /
• 제29권4호
• /
• pp.27-42
• /
• 2022

Background: Although children with cerebral palsy (CP) are able to walk independently, gait imbalance occurs due to abnormal muscle tone, musculoskeletal deformity, loss of balance, and selective motor control impairment. Gait restriction in the community and school is a major problem of rehabilitation in CP. Home-based therapy (HBT) provides a variety of interventions in which the therapist and the parent work together to resolve the activities and problems caused by the child's body structure. Therefore, we investigate the effectiveness of home-centered therapy on gross motor function in CP and try to present the possibility of clinical application. Design: A Systematic Review Methods: Research papers were published from Jan, 2012 to Jan, 2022 and were searched using Medline and PubMed. The search terms are 'family-centered' OR 'home-based' AND 'cerebral palsy'. A total of nine papers were analyzed in this study. The paper presented the quality level based on Physiotherapy Evidence Database (PEDro) scores to assess the quality of randomized clinical trials studies. Results: The results showed that HBT for strengthening exercise in lower extremity has a positive effect on the isokinetic torque and gross motor function. home-based treadmill therapy in CP is effective to perform at least 12 sessions of treadmill HBP in which the therapist determines the treadmill speed every week and the child's own gait pattern is modified. Conclusion: These results suggest that it will be important data for founding evidence on the effectiveness of home-centered therapy on gross motor function in children with cerebral palsy to advance clinical protocols.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.162-162
• /
• 2023

Climate change is a complex phenomenon having its impact on diverse sectors. Temperature and precipitation are two of the most fundamental variables used to characterize climate, and changes in these variables can have significant impacts on ecosystems, agriculture, and human societies. This study evaluated the historical (1981-2010) and future (2011-2100) climatic trends in the Seti-Gandaki basin of Nepal based on 5 km resolution Multi Model Ensemble (MME) of 18 Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6) for SSP1-2.6, SSP2-4.5 and SSP5-85 scenarios. For this study, ERA5 reanalysis dataset is used for historical reference dataset instead of observation dataset due to a lack of good observation data in the study area. Results show that the basin has experienced continuous warming and an increased precipitation pattern in the historical period, and this rising trend is projected to be more prominent in the future. The Seti basin hosts 13 operational hydropower projects of different sizes, with 10 more planned by the government. Consequently, the findings of this study could be leveraged to design adaptation measures for existing hydropower schemes and provide a framework for policymakers to formulate climate change policies in the region. Furthermore, the methodology employed in this research could be replicated in other parts of the country to generate precise climate projections and offer guidance to policymakers in devising sustainable development plans for sectors like irrigation and hydropower.

• Journal of Korea Trade
• /
• 제27권3호
• /
• pp.179-198
• /
• 2023

Purpose - There is a paucity of literature dealing with exporters' compliance issues in e-commerce exports. This study aims to fill this gap in the literature by exploring customs initiatives to facilitate the e-commerce exports of small and medium-sized enterprises (SMEs) in the changed compliance environment. The central question of this study was divided into five subquestions: first regarding the pros and cons of trade facilitation measures for Korean e-commerce export clearance; second and third questions about risk and compliance management for facilitation fourth about instruments, the changes in Korean SME compliance burden in e-commerce exports, and ways to improve trade facilitation for e-commerce exports. Design/methodology - This study adopts a qualitative approach using a case study method to understand the SME experience in Korean e-commerce export compliance procedures. A qualitative method was selected to answer research questions requiring an in-depth understanding of the regulatory procedures of customs administration and exporters' compliance burden. Because this study addresses the changing compliance environment for which statistical data is insufficient, a quantitative method is considered inappropriate. Based on the approach, data were collected using multiple sources, including an extensive literature review, interviews, and field observations. Thematic pattern matching was applied to interpret the data. Findings - This study examined ways to support SMEs in the changed e-commerce export compliance environment. Facilitation measures for e-commerce exports have contributed to SME access to global markets, simplifying export clearance procedures, and saving exporters' compliance costs. However, such instruments are limited in promoting SME compliance capabilities to cope with intensified competition and strengthened controls over foreign exporters in cross-border e-commerce. Therefore, this study highlights the importance of reshaping facilitation measures for e-commerce exports based on risk and compliance management theories to a system encouraging exporters' voluntary compliance. Originality/value - This study's academic significance derives from verifying the relationship between trade facilitation instruments and risk and compliance management procedures using an actual case in Korea. It is also of practical importance in navigating the directions for improving facilitation measures for e-commerce exports in a changed compliance environment.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.13-19
• /
• 1995

A dual purpose robot automation system is developed for both arc welding and spot welding by one robot within a cell. The need for automation of both arc welding and spot welding processes is urgent while the production volume is not so big as to accommodate separate stations for the two processes. Also, space is too narrow for separate stations to be settled down in the factory. A spot welding robot is chosen and the functions for arc welding are implemented in-house at cost of advanced functions. For the spot welding, a single pole type gun is used and the robot has to push down the plate to be wolded, which causes the robot positioning error. Therefore, position error compensation algorithm is developed. The basic functions for the arc welding processes are implemented using the digital I/O board of robot controller, PLC, and A/D conversion PCB. The weaving pattern is taught in meticulously by manual teach. A fixture unit is also developed for dual purpose. The main aspects of the system is presented in this paper especially in the design and implementation procedure. The signal diagrams and sequence logic diagrams are also included. The outcome of the dual purpose welding cell is the increased productivity and good production stability which is indispensable for production volume prediction. Also, it leads to reduction of manufacturing lead time.