• PNF and Movement
• /
• v.14 no.2
• /
• pp.149-155
• /
• 2016

Purpose: The purpose of this study was to investigate the effects of using proprioceptive neuromuscular facilitation (PNF) exercise in the progressive sitting position on the dynamic balance ability of a patient with a cerebellar injury. Methods: The subject had ataxia due to cerebellar injury. The subject participated in a PNF bilateral scapular pattern exercise with stabilizing reversal technique during a progressive sitting position session as well as baseline for 20 minutes a day for 4 weeks. In the first session, PNF exercises were performed at a height of 40 cm for 10 minutes, and in the second session they were performed at 50 cm for 10 minutes from a lower center of gravity (COG) to a higher COG sitting position. We used the Berg Balance Scale (BBS), Five-Times-Sit-to-Stand Test (FTSST), and the Timed Up and Go Test (TUGT) to measure the subject's dynamic balance ability every two days through the entire session. Results: After participating in the program, the subject's dynamic balance ability improved compared to the first baseline, as measured by BBS (2 points increased), FTSST (5.3 sec decreased), and TUGT (2 sec decreased). The increase was also maintained in the second baseline session. Conclusion: PNF exercise using bilateral scapula patterns with a stabilizing reversal technique helps to enhance the dynamic balance ability of a cerebellar injury patient.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.467-475
• /
• 2012

Static and dynamic train load tests were conducted to evaluate the train load transfer mechanism in the roadbed which was retained by two types (fully and partially) of segmental retaining walls reinforced by geogrid. The test roadbed was 2.6m high, 5m wide, and 6m long. A combination of earth pressure gages, displacement transducers, and strain gages were placed in specific locations to measure the responses. Test results showed that the wall displacement pattern as well as the earth pressure for the fully reinforced retaining wall was different from those for the partially reinforced retaining wall. In the dynamic train load test, the strain in the upper part of the wall tended to decrease, and both the residual deformation and the rate of the deformation were significantly lower than those in the current design standard.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.331-338
• /
• 2020

In this study, the characteristic of a 3-D micro-woven material, which is one of the newly developed periodic open-cell structure, is analyzed through various computational simulations. To increase the accuracy of the numerical simulations, the distance between each directional wire is parameterized using six design variables, and its model geometry is precisely discretized using tetrahedron elements. Using the improved computational model, the material properties of the mechanical, thermal, and fluidic behavior are investigated using commercial software and compared with the previous experimental results. By changing the space between the x- and y-directional wires, a parametric test is performed to determine the tendency of the change in the material properties. In addition, the correlation between two different material properties is investigated using the Ashby chart. The result can further be used in determining the optimal pattern and wire spacing in 3-D micro-woven materials.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.155-156
• /
• 2018

본 논문에서는 위치와 스마트폰 센서를 활용하여 불규칙한 생활패턴을 가진 사람들을 위한 일상 관리 어플리케이션을 설계하고 구현한다. 이 어플리케이션의 기능은 하루단위의 원형시간표 자동 제작하는 기능, 수면시간 측정 기능, 만보기 기능, 미세먼지 측정 기능 및 일, 주, 월단위의 누적 데이터 표시 기능으로 크게 5가지로 구분할 수 있다. 하루 단위의 원형시간표 자동제작 기능은 사용자의 위치를 파악하여 시간대별 위치정보를 이용해 24시간의 원형시간표를 채워나가는 기능이다. 특정 위치를 직장이나 집과 같이 등록함으로서 업무와 이동 등을 구분하여 등록할 수 있도록 한다. 수면시간 측정 기능은 앞서 말한 집의 위치에서 가속센서를 통해 일정시간 움직임이 없는 경우, 수면시간으로 간주하고 수면 시작시간과 기상시간을 유추하는 기능이다. 만보기 기능은 스마트폰의 기본 가속센서를 이용하여 측정하는 기능으로 목표치를 지정할 수 있도록 한다. 미세먼지의 표시 기능은 공공API를 이용하여 가져옴으로써 사용자에게 정확한 미세먼지 수치와 단계를 나누어 위험정도를 보여주는 기능이다. 각 데이터들은 데이터베이스에 누적 기록되며 일, 주, 월 단위로 사용자가 볼 수 있도록 기능을 구성한다. 이 누적데이터를 통해 사용자들에게 불안정한 하루 생활패턴이나 운동량 등을 인지하도록 함으로써 자신의 일상을 되짚어보고 앞으로의 일상을 개선할 수 있도록 도와준다.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.61-70
• /
• 1996

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony inyowth and secondary long term fixation. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone stem interface. An accurate evaluation of interf'ace micromotion and stress/strain fields in the bone-implant system may be relevant for better understanding of clinical situations and improving THA design. Recently finite element method(FEM) was introduced in'orthopaedic research field due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional finite element model of proximal femur with $Multilock^{TM}$ stem of 1179 blick elements to analyse the micromotions and mechanical behaviors at the bone-stem inteface in early post-operative period for the load simulating single leg stance. The results indicates that the values of relative motion for this well fit stem were $150{\mu}m$ in maximum $82{\mu}m$ in minimum and the largest relative motion was developed in medial region of Proximal femur and in anterior-posterior direction. The motion in the proximal bone was much greater than in the distal bone and the stress pattern showed high stress concentration on the cortex near the tip of the stem. These findings indicate that the loading on the hip joint in the early postoperative situation before achieving bony ingrowth could produce large micromotion of $150{\mu}m$ and clinicaly non-cemented THA patient should not be allowed weight bearing strictly early in the postoperative period.

• Journal of Biomedical Engineering Research
• /
• v.41 no.1
• /
• pp.48-54
• /
• 2020

In this paper, we deal with a liver fibrosis classification problem using ultrasound B-mode images. Commonly representative methods for classifying the stages of liver fibrosis include liver biopsy and diagnosis based on ultrasound images. The overall liver shape and the smoothness and roughness of speckle pattern represented in ultrasound images are used for determining the fibrosis stages. Although the ultrasound image based classification is used frequently as an alternative or complementary method of the invasive biopsy, it also has the limitations that liver fibrosis stage decision depends on the image quality and the doctor's experience. With the rapid development of deep learning algorithms, several studies using deep learning methods have been carried out for automated liver fibrosis classification and showed superior performance of high accuracy. The performance of those deep learning methods depends closely on the amount of datasets. We propose an enhanced U-net architecture to maximize the classification accuracy with limited small amount of image datasets. U-net is well known as a neural network for fast and precise segmentation of medical images. We design it newly for the purpose of classifying liver fibrosis stages. In order to assess the performance of the proposed architecture, numerical experiments are conducted on a total of 118 ultrasound B-mode images acquired from 78 patients with liver fibrosis symptoms of F0~F4 stages. The experimental results support that the performance of the proposed architecture is much better compared to the transfer learning using the pre-trained model of VGGNet.

• International Journal of Contents
• /
• v.11 no.2
• /
• pp.31-36
• /
• 2015

Recent years have seen a significant increase in demand for multimedia data over wireless sensor networks for monitoring applications that utilize sensor nodes to collect multimedia data, including sound and video. However, the multimedia streams generate a very large amount of data. When data transmission schemes for traditional wireless sensor networks are applied in wireless multimedia sensor networks, the network lifetime significantly decreases due to the excessive energy consumption of specific nodes. In this paper, we propose a data compression scheme that implements the Chinese remainder theorem to a wireless multimedia sensor network. The proposed scheme uses the Chinese Remainder Theorem (CRT) to compress and split multimedia data, and it then transmits the bit-pattern packets of the remainder to the base station. As a result, the amount of multimedia data that is transmitted is reduced. The superiority of our proposed scheme is demonstrated by comparing its performance to that of an existing scheme. The results of our experiment indicate that our proposed scheme significantly increased the compression ratio and reduced the compression operation in comparison to those of existing compression schemes.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.60-66
• /
• 2012

One of commonly physical phenomena encountered in pump sump systems in which its significant influence to the hydraulic performance of pump system plays an important role in the field of fluid engineering, is the appearance of free surface and submerged vortices. In this paper, a study of the vortices behavior and their formative mechanism of asymmetry is considered in this paper by using numerical approach. The Reynolds-Averaged Navier-Stokes (RANS) equations and k-omega Shear Stress Transport turbulence model used to describe the properties of turbulent flows, in company with VOF multiphase model, are implemented by Fluent code with multi-block structured grid system. In the numerical simulation, the calculated elevation of air-water interface and vortex core contours are used to classify visually surface vortices as well as submerged vortices. It is shown that the free surface vortex is identified by the concavity of liquid region from the free surface and swirling flow at that own plane. To investigate the distinctive behavior of these vortices corresponding to each given flow rate at the same water level, some numerical testing of them are considered here in such a manner that the flow pattern of surface vortex are obtained similarly to the obtained results from experiment. Furthermore, the influence due to the change of grid refinement and the variation of depth of the concavity are also considered in this paper. From that, these influential factors will be implemented to design a good pump sump with higher performance in the future.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.91-98
• /
• 2000

The seismicity of the Korean Peninsula shows a very irregular pattern of strain release typical of the intraplate seismicity. The Korean Peninsula may be divided into several tectonic provinces of differing tectonics. In this analysis, seismicity parameters for each tectonic province are evaluated from historical as well as instrumental earthquake data of the Korean Peninsula to examine the differences in seismic characteristics among tectonic provinces. Statistical analysis of the earthquake data made of incomplete data before the Choseon Dynasty and complete data afterwards reveals that there exist no significant differences in seismic characteristics between the tectonic provinces. It turns out the b-value in the intensity-frequency relation for the whole peninsula is about 0.6 and the maximum earthquake is about MMI X. The results of this study may be used in the probabilistic seismic hazard analysis of the Korean Peninsula and in estimating the design earthquake in earthquake engineering.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.2
• /
• pp.81-88
• /
• 2016

There are many types of national and international standards for low temperature tests depending on the products. This study conducted CFD analysis and estimation of the energy efficiency of the chamber both with and without a test object by considering variations of COP and specific volume according to temperature. The supply air was located in the upper area to compare the cooling performance for each location using various outlets in mixed ventilated conditions. For cases without the test object, the air temperature of the upper supply and center extract on the opposite side type chamber cooled faster than other areas by 4.3~29.8%. However, for cases with the test object, the object temperature of the upper supply and lower extract type chamber cooled faster than the other areas by 7.2~31.5%. The cooling efficiency of the air inside the chamber and the test object did not show the same pattern, which indicates the need to consider the cooling performance by not only the air but also the test object in the cryogenic chamber design for testing.