• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.35-40
• /
• 2004

본 연구에서는 최적화된 스커트 형상을 설계하기 위한 기초 자료를 얻기 위하여 스커트 의 확산각 및 길이 변화에 따른 노즐의 공력하중 특성을 고속 풍동시험을 통하여 조사하였다. 적절한 스커트를 사용하면 없을 때에 비해 김발의 구동력을 1/10 수준까지도 줄일 수 있었으며 시험 결과는 추후 스커트 형상 설계 데이터베이스로 활용하기 위해 정규화 하였다.

• 한국터널지하공간학회 논문집
• /
• 제6권2호
• /
• pp.113-128
• /
• 2004

본 연구에서는 아치형 복개 터널구조물에 작용하는 토압에 영향을 미치는 주요 영향인자들을 평가하기 위하여, 지반정수 및 굴착과 관련된 영향인자들에 대하여 몬테카를로 시뮬레이션 기법에 근거한 정량적 민감도 분석을 수행하였으며, 민감도 분석을 토대로 최대 영향인자 변화에 따른 토압의 변화에 대한 수치해석적 검토를 수행하였다. 민감도분석에 사용되는 출력결과들은 유한요소해석에서 얻어진 터널 위치별 연직 및 수평토압을 대상으로 하였다. 민감도 분석결과, 아치형 복개 터널구조물에 작용하는 수평 및 연직토압은 작용위치에 따라 동일한 영향인자에 대한 민감도가 상이한 것으로 나타났으며, 또한 최대 영향인자인 토피고 및 굴착사면 변화에 따라 아치형 복개 터널구조물에 작용하는 토압분포 및 크기가 변화하는 것으로 나타났다.

• 한국추진공학회지
• /
• 제19권6호
• /
• pp.33-41
• /
• 2015

로켓 기반 복합 사이클 엔진의 구성 요소로서 큰 후향 계단을 가진 이중 모드 램젯 엔진의 축소 모델을 설계하였다. 로켓 기반 복합 사이클 엔진에 적용하기 위해 설계 단계에서 고려하여야 하는 인자를 도출하였고 이 설계 인자에 대한 설계 방법을 정립하였다. 이러한 방법을 통하여 설계한 모델에 대하여 전산유체해석과 공력 시험을 수행함으로써 설계 검증을 일부 수행하고 큰 후향 계단을 가진 이중 모드 램젯 엔진의 유동 특성을 파악하였으며 이 연구에서 정립한 주요 설계 인자에 대한 설계 방법이 타당함을 확인할 수 있었다.

• Wind and Structures
• /
• 제34권3호
• /
• pp.259-274
• /
• 2022

The present paper is focused on analyzing a set of Computational Fluid Dynamics (CFD) simulation data on reducing orthogonal peak base moment coefficients on a high-rise rectangular building with wings. The study adopts an aerodynamic optimization procedure (AOP) composed of CFD, artificial neural network (ANN), and genetic algorithm (G.A.). A parametric study is primarily accomplished by altering the wing positions with 3D transient CFD analysis using k - ε turbulence models. The CFD technique is validated by taking up a wind tunnel test. The required design parameters are obtained at each design point and used for training ANN. The trained ANN models are used as surrogates to conduct optimization studies using G.A. Two single-objective optimizations are performed to minimize the peak base moment coefficients in the individual directions. An additional multiobjective optimization is implemented with the motivation of diminishing the two orthogonal peak base moments concurrently. Pareto-optimal solutions specifying the preferred building shapes are offered.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1995년도 가을 학술발표회 논문집
• /
• pp.211-216
• /
• 1995

In recent years, Natm has been successfully applied to difficult ground conditions with the use of soil-perservention methods which promote face stability and restrict excessive ground movement. When the tunnle excavation od made through difficult ground like highly weathered rock, the umbrella arch method is often adopted which pre-reinforceas tunnel crown periphery using a stiff shell-shaped structure. The umbrella arch method was originally developed in Itali, and has recently been confirmed its effectiveness in Korea as well. However, no in depth study on the umbrella arch method has been conducted ans as a result no rational analysis/design method is available at present. Therefore this study was undertaken with the aim of identifying the basic reinforcing mechanism and satablishing both qualitative and quantiative relationships between various design parameters and ground movements.

• Geomechanics and Engineering
• /
• 제18권6호
• /
• pp.595-603
• /
• 2019

A modified model combining Kriging and Monte Carlo method (MC) is proposed for probabilistic estimation of tunnel face stability in this paper. In the model, a novel uniform design is adopted to train the Kriging, instead of the existing active learning function. It has advantage of avoiding addition of new training points iteratively, and greatly saves the computational time in model training. The kinematic approach of limit analysis is employed to define the deterministic computational model of face failure, in which the Hoek-Brown failure criterion is introduced to account for the nonlinear behaviors of rock mass. The trained Kriging is used as a surrogate model to perform MC with dramatic reduction of calls to actual limit state function. The parameters in Hoek-Brown failure criterion are considered as random variables in the analysis. The failure probability is estimated by direct MC to test the accuracy and efficiency of the proposed probabilistic model. The influences of uncertainty level, correlation relationship and distribution type of random variables are further discussed using the proposed approach. In summary, the probabilistic model is an accurate and economical alternative to perform probabilistic stability analysis of tunnel face excavated in spatially random Hoek- Brown media.

• 터널과지하공간
• /
• 제16권3호
• /
• pp.203-208
• /
• 2006

본보는 터널전문지에 게재된 RMR과 Q, RMi 등의 3개의 암반분류법을 비교한 논문을 소개하는 것이다. 암반 분류법은 경험적 방법으로 지보설계에 적용되고 있는데, Nilsen 교수는 그의 연구팀과 함께 암반분류법의 변수들과 이들의 분산을 평가하는 연구를 시도하였다. 이 연구에는 현장의 여러 변수들을 평가하는데 요구되는 대표성과 반복성에 대하여 논하며, 또한 세가지 분류법에서 평점에 대한 민감성을 언급하고 있다. 비록 몇가지 변수들은 측정자에 따라 상당히 큰 측정편차를 갖고 있음에도 불구하고, 암반등급은 매우 유사한 것으로 평가퇴고 있음이 밝혀졌다.

• Wind and Structures
• /
• 제10권5호
• /
• pp.463-479
• /
• 2007

A series of wind tunnel sectional model dynamic tests of a twin-deck bridge were conducted at the CLP Power Wind/Wave Tunnel Facility (WWTF) of The Hong Kong University of Science and Technology (HKUST) to investigate the effects of gap-width on the self-excited vibrations and the dynamic and aerodynamic characteristics of the bridge. Five 2.9 m long models with different gap-widths were fabricated and suspended in the wind tunnel to simulate a two-degrees-of-freedom (2DOF) bridge dynamic system, free to vibrate in both vertical and torsional directions. The mass, vertical frequency, and the torsional-to-vertical frequency ratio of the 2DOF systems were fixed to emphasize the effects of gap-width. A free-vibration test methodology was employed and the Eigensystem Realization Algorithm (ERA) was utilized to extract the eight flutter derivatives and the modal parameters from the coupled free-decay responses. The results of the zero gap-width configuration were in reasonable agreement with the theoretical values for an ideal thin flat plate in smooth flow and the published results of models with similar cross-sections, thus validating the experimental and analytical techniques utilized in this study. The methodology was further verified by the comparison between the measured and predicted free-decay responses. A comparison of results for different gap-widths revealed that variations of the gap-width mainly affect the torsional damping property, and that the configurations with greater gap-widths show a higher torsional damping ratio and hence stronger aerodynamic stability of the bridge.

• Computers and Concrete
• /
• 제27권2호
• /
• pp.163-173
• /
• 2021

In this paper, the parameters of haunch height, reinforcement ratio and site condition were evaluated for the influence on the seismic performance of a composite precast fabricated utility tunnel by shaking table test and numerical simulation. The dynamic response laws of acceleration, interlayer displacement and steel strain under unidirectional horizontal seismic excitation were analyzed through four specimens with a similarity ratio of 1:6 in the test. And a numerical model was established and analyzed by the finite element software ABAQUS based on the structure of utility tunnel. The results indicated that composite precast fabricated utility tunnel with the good anti-seismic performance. In a certain range, increasing the height of haunch or the ratio of reinforcement could reduce the influence of seismic wave on the utility tunnel structure, which was beneficial to the structure earthquake resistance. The clay field containing the interlayer of liquefied sandy soil has a certain damping effect on the structure of the utility tunnel, and the displacement response could be reduced by 14.1%. Under the excitation of strong earthquake, the reinforcement strain at the side wall upper end and haunches of the utility tunnel was the biggest, which is the key part of the structure. The experimental results were in good agreement with the fitting results, and the results could provide a reference value for the anti-seismic design and application of composite precast fabricated utility tunnel.

• Wind and Structures
• /
• 제6권3호
• /
• pp.221-248
• /
• 2003

The design of high-rise building is often influenced by wind-induced motions such as accelerations and lateral deflections. Consequently, the building's structural stiffness and dynamic (vibration periods and damping) properties become important parameters in the determination of such motions. The approximate methods and empirical expressions used to quantify these parameters at the design phase tend to yield values significantly different from each other. In view of this, there is a need to examine how actual buildings in the field respond to dynamic wind loading in order to ascertain a more realistic model for the dynamic behavior of buildings. This paper describes the findings from full-scale measurements of the wind-induced response of typical high-rise buildings in Singapore, and recommends an empirical forecast model for periods of vibration of typical buildings in Singapore, an appropriate computer model for determining the periods of vibration, and appropriate expressions which relate the wind speed to accelerations in buildings based on wind tunnel force balance model test and field results.