• 터널과지하공간
• /
• 제12권1호
• /
• pp.37-42
• /
• 2002

본 연구에서는 터널의 주요 설계정수인 탄성계수와 측압계수를 산정 할 수 있는 역 해석 알고리즘을 개발하였다. 해석 알고리즘은 범용 유한차분해석 프로그램인 FLAC의 해석과정 내에 직접탐색법 알고리즘을 이용한 FISH 문을 삽입함으로써 구성하였다. 기존 연구에서 사용한 탄성모델에 대하여 본 연구에서 개발한 역 해석 알고리즘의 적합성을 검토하였다. 본 연구에서 개발된 역 해석 알고리즘은 기존 역 해석 기법에 비해 더 적은 반복연산에 더 정확한 결과를 얻을 수 있음을 확인하였다.

• Wind and Structures
• /
• 제28권4호
• /
• pp.215-224
• /
• 2019

Because of the particularity and complexity of direct air-cooling structures (ACS), wind parameters given in the general load codes are not suitable for the wind-resistant design. In order to investigate the wind loads of ACS, two 1/150 scaled three-span models were designed and fabricated, corresponding to a rigid model and an aero-elastic model, and wind tunnel tests were then carried out. The model used for testing the wind pressure distribution of the ACS was defined as the rigid model in this paper, and the stiffness of which was higher than that of the aero-elastic model. By testing the rigid model, the wind pressure distribution of the ACS model was studied, the shape coefficients of "A" shaped frame and windbreak walls, and the gust factor of the windbreak walls were determined. Through testing the aero-elastic model, the wind-induced dynamic responses of the ACS model was studied, and the wind vibration coefficients of ACS were determined based on the experimental displacement responses. The factors including wind direction angle and rotation of fan were taken into account in this test. The results indicated that the influence of running fans could be ignored in the structural design of ACS, and the wind direction angle had a certain effect on the parameters. Moreover, the shielding effect of windbreak walls induced that wind loads of the "A" shaped frame were all suction. Subsequently, based on the design formula of wind loads in accordance with the Chinese load code, the corresponding parameters were presented as a reference for wind-resistant design and wind load calculation of air-cooling structures.

• 한국터널지하공간학회 논문집
• /
• 제21권6호
• /
• pp.875-885
• /
• 2019

본 논문은 쉴드 터널의 신뢰성 기반 설계시에 세그먼트 라이닝에 작용하는 전체 하중에 대한 변동계수와 토압에 대한 변동계수를 제시하였다. 이를 위해 국내 도심지 구간에 해당하는 지반 조사 자료를 분석하여 풍화토 및 풍화암에 대한 통계적 특성치를 산정하였으며, MCS기법을 활용하여 이 값들을 Terzaghi 이론식에 적용하여 변동계수를 산정할 수 있었다. 그 결과, 풍화토및 풍화암에 대한 이완하중의 변동계수는 0.08~0.14의 범위로 나타났고, 작용하는 전체 하중에 대한 변동계수는 LC1 = 0.38, LC2 = 0.33, LC3 = 0.37이 적절한 것으로 나타났다. 제시된 변동계수는 쉴드 터널의 세그먼트에 대한 신뢰성 기반 설계시 활용이 가능할 것으로 판단된다.

• 터널과지하공간
• /
• 제13권2호
• /
• pp.138-152
• /
• 2003

지하 수백미터 심부에 위치하는 고준위방사성 폐기물 처분장에서의 열-역학적 안정성 평가를 위해 FLAC3D를 이용한 3차원 해석이 수행되었다. 효과적인 해석을 위해 FISH프로그램이 작성되었으며 고성과 유성 의 시추부지에서 얻어진 지질, 암반 물성자료가 사용되었다. Factional factorial design을 적용한 실험설계를 거쳐 얻어진 응력, 온도에 대한 민감도 분석이 실시되었으며 이를 통해 처분장 안정성에 영향을 미치는 주요 설계 인자의 선정 및 인자 상호간의 영향을 분석할 수 있었다. 연구 결과 열-역학적 안정성에 가장 큰 영향을 미치는 인자는 처분공의 간격으로 나타났으며 처분터널의 간격과 완충재의 두께가 그 다음으로 주요한 인자인 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.29-36
• /
• 2007

지표면 침하량, 침하 기울기 그리고 터널주변의 지반변위에 대한 관리와 예측은 도심지 터널 시공에 있어서 주요한 인자가 된다. 본 논문은 도심지 NATM터널의 변형거동에 대한 세밀한 분석을 위하여 사례분석과 수치해석적인 방법을 통하여 굴착에 따른 지반 평가와 거동 예측을 수행하였다. 수치해석적인 방법은 FLAC-2D 변형률 연화모델과 탄소성모델을 이용하였다. 현장계측은 지표면 침하와 지중변위를 수행하였으며, 계측결과는 시공중 설계물성치의 재설정에 이용되어졌다.

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.81-91
• /
• 2009

근래에 들어 터널계획시 방재 및 환경훼손 측면을 고려하여 상, 하행터널이 나란히 배열되는 병설터널의 형태로 계획되는 사례가 증가하고 있으나, 이에 대한 연구성과는 상대적으로 미미한 실정이다. 병설터널 사이에 위치하는 필라부는 연직응력의 증가와 수평응력의 감소에 의해 병설터널 주변암반의 불안정성이 증가하며, 이와 같은 불안정성은 필라폭이 감소할수록 더욱 증가하게 된다. 본 연구에서는 병설터널의 굴진에 따른 필라부의 간섭효과와 응력변화거동의 분석을 위한 다양한 조건들에 대해 수치해석을 시행하였으며, 수치해석 결과에 대한 회귀분석을 통해 필라의 유발응력평가식을 제안하였다. 또한, 제안식과 Hoek-Brown 파괴기준을 적용하여 필라부의 정량적인 안전율 산정기법을 제안하였고, 제안된 기법의 적용성 확대를 위해 보강공법이 적용된 경우를 고려할 수 있는 해석기법을 아울러 제시하였다. 마지막으로 다양한 변수 분석을 통해 Hoek-Brown 파괴기준을 기초로 제안된 본 기법의 효율성을 입증하였다.

• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.509-518
• /
• 2020

Multi-layered primary linings have been proved to be highly effective for tunneling in severe squeezing grounds. But there still has not existed well-established design method for it. Basically, there are two main critical problems in this method, including determinations of allowable deformation and distribution of support stiffness. In order to address such problems, an attempt to investigate the mechanical response of a circular tunnel with double primary linings is performed in this paper. Analytical solutions in closed form for stresses and displacements around tunnels are derived. In addition, the effectiveness and reliability of theoretical formulas provided are well validated by using the numerical method. Finally, based on the analytical solutions, a parametric investigation on the effects of allowable deformation and distribution of support stiffness on tunnel performance is conducted. Results show that the rock pressure and displacement are significantly affected by these two design parameters. It can be found that rock pressure decreases as either allowable deformation increases or stiffness of the first primary lining decreases, but rock displacement shows an opposite trend. This paper can provide a useful guidance for the design of multi-layered primary linings.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.131-138
• /
• 2019

It is necessary to predict subway induced vibration if a new subway is to be built. To obtain the vibration response reliably, a three-dimensional (3D) FEM model, consisting of the tunnel, the soil, the subway load and the building above, is established in MIDAS GTS NX. For this study, it is a six-story frame structure built above line 3 of Guangzhou metro. The entire modeling process is described in detail, including the simplification of the carriage load and the determination of model parameters. Vibration measurements have been performed on the site of the building and the model is verified with the collected data. The predicted and measured vibration response are used together to assess vibration level due to the subway traffic in the building. The No.1 building can meet work and residence comfort requirement. This study demonstrates the applicability of the numerical train-tunnel-soil-structure model for the serviceability assessment of subway induced vibration and aims to provide practical references for engineering applications.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.413-433
• /
• 2017

The dynamic and structural responses of a 1000-m long circular submerged floating tunnel (SFT) with both ends fixed under survival irregular-wave excitations are investigated. The floater-mooring nonlinear and elastic coupled dynamics are modeled by a time-domain numerical simulation program, OrcaFlex. Two configurations of mooring lines i.e., vertical mooring (VM) and inclined mooring (IM), and four different buoyancy-weight ratios (BWRs) are selected to compare their global performances. The result of modal analysis is included to investigate the role of the respective natural frequencies and elastic modes. The effects of various submergence depths are also checked. The envelopes of the maximum/minimum horizontal and vertical responses, accelerations, mooring tensions, and shear forces/bending moments of the entire SFT along the longitudinal direction are obtained. In addition, at the mid-section, the time series and the corresponding spectra of those parameters are also presented and analyzed. The pros and cons of the two mooring shapes and high or low BWR values are systematically analyzed and discussed. It is demonstrated that the time-domain numerical simulation of the real system including nonlinear hydro-elastic dynamics coupled with nonlinear mooring dynamics is a good method to determine various design parameters.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.235-245
• /
• 2019

This paper presents a novel methodology for face stability assessment of rock tunnels under water table by combining the kinematical approach of limit analysis and numerical simulation. The tunnels considered in this paper are excavated in fractured rock masses characterized by the Hoek-Brown failure criterion. In terms of natural rock deposition, a more convincing case of depth-dependent mi, GSI, D and ${\sigma}_c$ is taken into account by proposing the horizontally layered discretization technique, which enables us to generate the failure surface of tunnel face point by point. The vertical distance between any two adjacent points is fixed, which is beneficial to deal with stability problems involving depth-dependent rock parameters. The pore water pressure is numerically computed by means of 3D steady-state flow analyses. Accordingly, the pore water pressure for each discretized point on the failure surface is obtained by interpolation. The parametric analysis is performed to show the influence of depth-dependent parameters of $m_i$, GSI, D, ${\sigma}_c$ and the variation of water table elevation on tunnel face stability. Finally, several design charts for an undisturbed tunnel are presented for quick calculations of critical support pressures against face failure.