• 산업경영시스템학회지
• /
• 제23권61호
• /
• pp.89-98
• /
• 2000

For statistical process control, the process data are collected by the measurement system. But, the measurement system may have instrument error or/and operator error. In the measured values of products, the total observed variance consists of process variance and variance due to error of measurement system. In this paper, we design more practical T-s control chart considering estimated measurement error The effects of measurement error on the expected total cost and design parameters are investigated.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.42-48
• /
• 2021

In this paper, when manufacturing large/multi-mold parts (more than 30 core parts),A mold manufacturing (tolerance) management system was established through design-processing linkage.The mold manufacturing (tolerance) management system is a design-based measurement shape/measurement position determination system, M/C processing-linked measurement drive system,It is composed of four parts: CAD-linked measurement result analysis system and manager mold part quality management system.In addition, the constructed system was applied to the field and the effect of system construction was evaluated by comparing it with the existing process.As a result of the evaluation, the measurement precision is within 0.02mm, and the time it takes to measure after the end of processing is shorter than that of the existing process.(12 hours → 2 hours) It was shortened to 16.7%.In addition, it was confirmed that the time required for reprocessing after measurement was reduced by 25% (4 hours → 1 hour) compared to the existing process.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.221-232
• /
• 1999

This study investigates the applicability and design scheme of fieldbus network in the measurement system used for precise and safe construction as well as efficient maintenance of bridges. In order to maximize the function and performance of bridge monitoring system, this study introduces the CAN(Controller Area Network), one of the fieldbus protocols, in the measurement system of bridges. This study presents the implementation method of CAN on the monitoring system of bridge, and also proposes a bandwidth allocation scheme for the design of network. The validity of the proposed CAN design method is verified through a simulation experiment. It is shown that the CAN can be readily applicable to the measurement system of bridges.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 가을 학술발표대회 논문집 디자인 학 연구
• /
• pp.28-29
• /
• 1998

• 한국정밀공학회지
• /
• 제32권12호
• /
• pp.1039-1047
• /
• 2015

Contact type sensors (e.g., displacement sensor and strain gauge) were typically used to evaluate the safety and mechanical properties in machines and construction. However, those contact type sensors have been constrained because of measurement problems such as surface roughness, temperature, humidity, and shape. The Digital Image Correlation (DIC) measurement system is a vision measurement system. This measurement system uses the taken image using a CCD camera and calculates the image correlation between the reference image and the deformed image under external force to measure the displacement and strain rates. In this paper, we discuss methods to improve the measurement precision of the digital image correlation measurement system. A tensile test was conducted to compare the precision improvement effects, by using the universal test machine and the DIC measurement system, with the use of subpixel algorithms, i.e., the Coarse Fine Search (CFS) algorithm and the Peak Finding (PF) algorithm.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.179-186
• /
• 2022

In this paper, we design a heart rate measurement system using a web camera. In order to measure the heart rate, face image information is acquired and classified. The face image data is collected from web camera. The heart rate is measured using the collected face image data. We design a function to measure heart rate using input of face information using a web camera in non-contact manner. We design a function that reads face information and estimates heart rate by analyzing face color. An experiment was performed to compare the non-contact heart rate with the actual measured heart rate. The heart rate measurement system using a web camera proposed in this paper is a technology that can be used in various fields. It will be used in sports fields that require heart rate measurement at a low cost.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.87-93
• /
• 2017

In this paper, we design a small low power single channel ECG(Electrocardiogram) system of Chest Belt type with fiber-type electrodes to measure emotional state change of game addict. HRV(Heart Rate Variability) is analyzed through heart rate signal measurement and the psychological stress state is judged by using it. And it verifies its effectiveness through prototype. First, we design HR measurement module through low power MCU(Micro Controller Unit) and implement prototype level measurement system. The results showed that the difference between the addiction group and the general group was confirmed and that the system was effective. The result of this study can be used for health management such as reduction of stress of the user through music and breathing that lowers the stress by detecting the stress state of the general person or the chronic ill person.

• Nuclear Engineering and Technology
• /
• 제45권2호
• /
• pp.249-256
• /
• 2013

In accordance with the US Nuclear Regulatory Commission (US NRC), Regulatory Guide 1.20, the reactor vessel internals comprehensive vibration assessment program (RVI CVAP) has been developed for an Advanced Power Reactor 1400 (APR1400). The purpose of the RVI CVAP is to verify the structural integrity of the reactor internals to flow-induced loads prior to commercial operation. The APR1400 RVI CVAP consists of four programs (analysis, measurement, inspection, and assessment). Thoughtful preparation is essential to the measurement program, because data acquisition must be performed only once. The optimized design of a vibration and stress measurement system for the RVI CVAP is essential to verify the integrity of the APR1400 RVI. We successfully designed a vibration and stress measurement system for the APR1400 RVI CVAP based on the design materials, the hydraulic and structural analysis results, and performance tests of transducers in an extreme environment. The measurement system designed in this paper will be utilized for the APR1400 RVI CVAP as part of the first construction project in Korea.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.141-145
• /
• 2003

The linear motor available for linear transition motion, because of its advantages, the motor design and its application have gradually increased, but the quantitative measurement system of thrust force has not been generalized. So, this paper proposes the modeling, computation method, and measurement system of linear thrust force in HB-type linear pulse motor. As the computation method of thrust force in linear motor is presented and the measurement system is designed, and manufactured, it would be verified that reliability of measurement method and measurement system, considering on and comparing the results of mathematical modeling with measured values of static thrust force and dynamic one.

• 복식
• /
• 제55권5호
• /
• pp.55-64
• /
• 2005

The concern with three-dimensional measurement has been growing in recent years. And over the last few years, several studies have been made on three-dimensional measurement. Some of the studies using a three-dimensional measurement have focused on type of form of human body and evaluation of fitness. But there has been no study about applications of three-dimensional measurement system for shape analysis. So, the purpose of this study was to investigate about application of three-dimensional mea-surement system lot shape analysis. The instrument and tools for three-dimensional measurement was Whole Body 3D scanner(model name: Exyma-WBS2H). Analysis program used in experiment is Rapid Form 2004 PPI (INUS technology, Int, Korea). The following results were obtained; 1. The point data using three-dimensional measurement system built 3D model. 2. The three-dimensional data were used to analyze length and curvature of shape. 3. The shape using three-dimensional measurement system could be used in variety field.