• 제목/요약/키워드: Design load

검색결과 9,382건 처리시간 0.035초

CAD에 의한 엑스카 베이터(excavator)의 굴삭능력 향상에 관한 연구 (A study on the improvement of the digging load capacity of an excavator by CAD technique)

  • 박찬기;이장무
    • 오토저널
    • /
    • 제4권2호
    • /
    • pp.24-34
    • /
    • 1982
  • In order to improve the digging load capacity of a domestic excavator model. computer aided design(CAD) technique was applied to the optimum design of the excavator boom. From this study, the digging load capacity of both the bucket cylinder and the dipperstick cylinder could be made about same and the overall digging load capacity could be increased by about 50%, also, the computer program package developed in this study can be flexibly applied to the design of other construction machines by changing and/or adding a few subprograms and the input data.

  • PDF

Reliability Assessments and Design Load Factors for Reinforced Concrete Containment Structures of Nuclear Power Plant

  • Han, Bong-Koo
    • Nuclear Engineering and Technology
    • /
    • 제29권6호
    • /
    • pp.444-450
    • /
    • 1997
  • The current ASME code for reinforced concrete containment structures are not based on probability concepts. The stochastic nature of natural hazard or accidental loads and the variations of material properties require a probabilistic approach for a rational assessment of structural safety and performance. The paper develops design load factors for the serviceability limit state of reinforced concrete containment structures. The target limit state probability is determined and the load factors are calculated by the numerical analysis. Design load factors are proposed and carried out the reliability assessments.

  • PDF

보강된 섬유강화 복합재료 패널의 좌굴해석 및 파손강도의 최적 설계 (Optimization for Buckling and Postbuckling Behavior of Stiffened Fiber Reinforced Composite Panels)

  • 이광록;양원호;조명래;성기득
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.913-919
    • /
    • 2001
  • In this study, fiber orientation of stiffener was conducted to increase buckling load or failure load in each case with a different design value and a different objective function for stiffened laminated composite panel of I-type under compression loading. Regarding each of buckling load or failure load as objective function, optimum design was carried out. In respect of optimum design, it was investigated that optimum shape for buckling could improve fail load for postbuckling, because it was difficult to investigate the optimization of postbuckling which need long analysis times for nonlinear analysis.

  • PDF

The Study of the Stray Load Loss and Mechanical Loss of Three Phase Induction Motor considering Experimental Results

  • Kim, Dong-Jun;Choi, Jae-Hak;Chun, Yon-Do;Koo, Dae-Hyun;Han, Pil-Wan
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권1호
    • /
    • pp.121-126
    • /
    • 2014
  • The accurate determination of induction motor efficiency depends on the estimation of the five losses of stator and rotor copper loss, iron loss, mechanical loss and stray load loss. As the mechanical and stray load losses are not calculated by electro-magnetic analysis, the values of these two losses are very important in induction motor design. In this paper, the values of mechanical loss and stray load loss are proposed through investigating testing data from commercial products of three phase induction motors under 37kW. If the values of this paper are applied to motor design, the accuracy of design and analysis can be improved. The losses of motors are obtained by using load and no-load test results following IEC 60034-2-1 standard.

램프 로드-언로드 특성 향상을 위한 서스펜션강성 최적설계 (Optimal design of the suspension stiffness in HDD for improving the load/unload performance)

  • 강태식;김태수;이철우
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.898-901
    • /
    • 2003
  • In order to get the drive reliability and low Power-consumption characteristics, most of small form factor HDD has und the load/unload mechanism instead of CSS type. Compared with CSS mechanism, the load/unload system has little opportunity of head/media contact during the disk spin-up and down. However, the load/unload mechanism needs the precise integration technology with slider, suspension, ramp and load/unload velocity, and all of these component s should be designed simultaneously, not an individually. In this paper, we focus the design of the suspension stiffness using the specified ABS design. We use the CML software to calculate the load/unload dynamic and use the RSM(Response surface method) to get the optimal condition of the suspension stiffness.

  • PDF

주차장 구조물 슬래브의 차량하중영향에 관한 연구 (Vehicle Load Effects on Slab of Parking Garage Structure)

  • 곽효경;송종영
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1997년도 봄 학술발표회 논문집
    • /
    • pp.131-138
    • /
    • 1997
  • The equivalent vehicle load factors which can consider the concentrated wheel load effect in slab design of parking garage structure are proposed. Based on the standard vehicle with total weight of 2.4 ton which is designed through the investigation of small to medium vehicle produced in Korea and the review of numerous foreign design codes for parking garage structure, the effects of moving vehicle loads on slab are analyzed using the finite element method. Besides. the relationships between the equivalent load factors and the sectional dimensions are established by regression analysis. The calculation of design forces can be easily accomplished without taking sophisticated numerical analysis for the moving vehicle load as the results obtained to the distributed load are multiplied by the proposed load factors in practice.

  • PDF

WIM 자료를 활용한 화물차 축하중 분포 모형 개발 (Development of Truck Axle Load Distribution Model using WIM Data)

  • 이동석;오주삼
    • 대한토목학회논문집
    • /
    • 제26권5D호
    • /
    • pp.821-829
    • /
    • 2006
  • 교통하중은 포장 설계 및 해석에서 가장 중요한 입력 변수로서 포장 파손의 주요 원인이 된다. 따라서 정확한 포장 설계 및 해석을 위해서는 적절한 교통하중 정량화가 선행되어야 한다. 전통적으로 교통하중은 혼합된 교통흐름을 설계목적의 하나의 값으로 변환시켜주는 ESALs 관점에서 추정되어왔으나 이는 AASHO 도로 테스트를 통해 도출된 지극히 경험적인 값으로 전 노선망에 대해 평균적인 계수로 적용하기에는 한계가 있다. 이러한 등가단축하중계수의 문제점을 해결하기 위해 선진국에서는 역학적 개념을 도입한 많은 연구를 진행한 결과 역학적-경험적 설계법(Mechanistic-Empirical Design)에 적용할 수 있는 축하중 분포(Axle Load Spectra)를 이용한 교통하중 정량화 방안을 수립하였다. 본 논문에서는 일반국도에 설치 운영되고 있는 WIM 시스템을 통해 수집된 화물차 하중 데이터를 이용하여 축하중 분포 특성(Axle Load Spectra)을 이해하고 혼합정규분포함수에 기초한 축 형태별 하중 분포 모형식을 제시하였으며, 이를 기존 하중 분포 모형과 비교 평가하였다. 본 논문에서 제시한 화물차 축하중 분포 특성 및 축하중 분포 모형식은 향후 일반국도 및 고속도로의 포장 설계법 개발을 위한 교통하중 정량화 방안 수립 시, 과적 차량 단속 정책 수립 시, 도로 유지관리를 위한 계획 수립 시 기초자료로써 활용가능하다.

고속철도 WIM 데이터에 대한 통계분석을 통한 철도교량 설계활하중 분석 (Analysis of Design Live Load of Railway Bridge Through Statistical Analysis of WIM Data for High-speed Rail)

  • 박수민;여인호;백인열
    • 한국전산구조공학회논문집
    • /
    • 제28권6호
    • /
    • pp.589-597
    • /
    • 2015
  • 이 논문에서는 고속철도교량 설계를 위한 활하중 모델을 통계 및 확률적 방법으로 검토하고, 하중조합의 하중계수가 주는 안전율을 분석하였다. 이 연구는 철도교량 설계기준에 대한 한계상태설계법 개발의 일환이며, 이를 위하여 경부고속철도를 운행하는 열차를 대상으로 약 한달 동안 실측하여 데이터를 수집하고 분석하였다. 이 데이터를 대상으로 교량의 설계수명에 맞도록 4가지 통계 방법들을 적용하여 설계하중을 추정하여 비교 검토하였다. 또한, 철도교량의 설계하중조합이 주는 안전율을 검토하기 위하여 신뢰도지수를 구하고 이를 분석하였다. 실측 데이터로부터 추정한 활하중효과에 대하여, 현행 고속철도 설계활하중인 표준열차하중의 0.75배를 적용한 설계활하중 효과의 크기가 최소 30~22% 더 크게 나왔다. 신뢰도분석을 통하여, 극한한계상태만을 기준으로 본다면, 추가적인 하중계수 감소의 가능성이 있음을 알 수 있다.

준해석적 비선형 설계민감도를 위한 개선된 변위하중법 (Augmented Displacement Load Method for Nonlinear Semi-analytical Design Sensitivity Analysis)

  • 이민욱;유정훈;이태희
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.492-497
    • /
    • 2004
  • Three methods for design sensitivity such as numerical differentiation, analytical method and semi-analytical method have been developed for the last three decades. Although analytical design sensitivity analysis is exact, it is hard to implement for practical design problems. Therefore, numerical method such as finite difference method is widely used to simply obtain the design sensitivity in most cases. The numerical differentiation is sufficiently accurate and reliable for most linear problems. However, it turns out that the numerical differentiation is inefficient and inaccurate because its computational cost depends on the number of design variables and large numerical errors can be included especially in nonlinear design sensitivity analysis. Thus semi-analytical method is more suitable for complicated design problems. Moreover semi-analytical method is easy to be performed in design procedure, which can be coupled with an analysis solver such as commercial finite element package. In this paper, implementation procedure for the semi-analytical design sensitivity analysis outside of the commercial finite element package is studied and computational technique is proposed, which evaluates the pseudo-load for design sensitivity analysis easily by using the design variation of corresponding internal nodal forces. Errors in semi-analytical design sensitivity analysis are examined and numerical examples are illustrated to confirm the reduction of numerical error considerably.

  • PDF

Characterization and uncertainty of uplift load-displacement behaviour of belled piers

  • Lu, Xian-long;Qian, Zeng-zhen;Zheng, Wei-feng;Yang, Wen-zhi
    • Geomechanics and Engineering
    • /
    • 제11권2호
    • /
    • pp.211-234
    • /
    • 2016
  • A total of 99 full-scale field load tests at 22 sites were compiled for this study to elucidate several issues related to the load-displacement behaviour of belled piers under axial uplift loading, including (1) interpretation criteria to define various elastic, inelastic, and "failure" states for each load test from the load-displacement curve; (2) generalized correlations among these states and determinations to the predicted ultimate uplift resistances; (3) uncertainty in the resistance model factor statistics required for reliability-based ultimate limit state (ULS) design; (4) uncertainty associated with the normalized load-displacement curves and the resulting model factor statistics required for reliability-based serviceability limit state (SLS) design; and (5) variations of the combined ULS and SLS model factor statistics for reliability-based limit state designs. The approaches discussed in this study are practical and grounded realistically on the load tests of belled piers with minimal assumptions. The results on the characterization and uncertainty of uplift load-displacement behaviour of belled piers could be served as to extend the early contributions for reliability-based ULS and SLS designs.