• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.91-98
• /
• 2018

Length of a vehicle is an important variation to generate different variants of an automotive platform. This parameter is usually adjusted by embedding dimensional flexibility into different components of the Body in White (BIW) including the floor pan. Due to future uncertainties, it is not necessarily possible to define certain values of wheelbase for the future products of a platform. This work is performed to add flexibility into the design process of a length-variable floor pan. By means of this analysis, the cost and time consuming process of optimization is not necessary to be performed for designing the different variants of a product family. Stiffness and mass of the floor pan are two important functional requirements of this component which directly affect the occupant comfort, dynamic characteristics, fuel economy and environmental protection of the vehicle. A combination of Genetic algorithm, GMDH-type of artificial neural networks and TOPSIS methods is used to optimally design the floor pan associated with arbitrary length of the variant in the defined system range. The correlation between the optimal results shows that for a constant mass of the floor pan, the first natural frequency decreases by increasing the length of this component.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.159-168
• /
• 2015

In this study, visual evaluation was wide pants with changes in length of pants and width of hem line of wide pants design to provide data which can enhance wearing image effects at the production of wide pants. According to the length of pants and width of hem line of wide pants, a total of 9 stimulants were chosen. Then, they were evaluated using a seven-point rating scale against 40 fashion students. The data has been analyzed by Factor Analysis, ANOVA, $Scheff{\acute{e}}$'s Test and the MCA method. The results of the study are as follows : 1. According to factor analysis, the components of visual evaluation depending on the length of pants and width of hem line of wide pants were divided into five factors: individuality, body correction, modesty, body length and cute. 2. According to visual evaluation depending on changes in the length of pants, no significant difference was found in all five positions. 3. According to visual evaluation depending on changes in the length of pants and width of hem line of wide pants, 'width of hem line 60, 100' revealed a significant difference in body correction. 'width of hem line 80' revealed a significant difference in body correction and body length. 4. In terms of interactions over changes in the length of pants and width of hem line of wide pants, no interaction effects were found in all five factors. According to multiple classification analysis(MCA) on the factors without interaction effects, length of pants had more effect on visual image in body correction, body length and cute. In other factors, more influence was observed depending on the width of hem line.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.2
• /
• pp.1-10
• /
• 2009

The purpose of this study is to investigate harmonious color schemes based on a length proportion of upper and lower parts of a body by; understanding of the harmonious length proportion of a square measure of a color in color coordination of fashion design, and presenting a mutual relation of the length proportion of a square measure of a color according to the various way of color schemes and proportions. For this study, monochromatic scheme, analogous scheme and complementary scheme were adapted as the color schemes, and each color scheme was coordinated by analogous tone and contrast tone. Also, 1:1 symmetry proportion, 1:2 harmonic proportion, 1:1.618 golden section, 1:3 and 1:5 contrast proportion were used as the square measure of a color. For the survey, 12 sets of color sample were organized. The survey was conducted 182 of university students majored in fashion design, and 143 responded samples were analyzed using SPSS 12. The result of the study is as follows: 1:5 contrast proportion is most inharmonious in general, and 1:1 symmetry proportion is followed. It is thought that too much or same length of the square measure of colors has less attractive effect of coloring. On the other hand, 1:1.618 golden section and 1:2 harmonic proportion are accepted to be harmonious in all color schemes. The length proportion of the square measure of a color had more influence on harmony of color coordination in fashion design rather than color schemes. Though, on the assumption that people have a similar perception about the color image of fashion design, it will play an important role in strengthening or diminution of color in cloth if the coloring effect of the length proportion of the square measure of a color is used in fashion design and wearing of clothes.

• Structural Engineering and Mechanics
• /
• v.76 no.1
• /
• pp.67-81
• /
• 2020

Pretensioned concrete (PC) is widely used in contemporary construction. Bond of prestressing strand is significant for composite-action between the strand and concrete in the transfer and flexural-bond zones of PC members. This study develops a new methodology for quantifying the bond of 18-mm prestressing strand in PC members based on results of a pullout test, the Standard Test for Strand Bond (STSB). The experimental program includes: (a) twenty-four pretensioned concrete beams, using a wide range of concrete compressive strength; and (b) twelve untensioned pullout specimens. By testing beams, the transfer length, flexural-bond length, and development length were all measured. In the STSB, the pullout forces for the strands were measured. Experimental results indicate a significant relationship between the bond of prestressing strand to the code-established design parameters, such as transfer length and development length. However, the code-predictions can be unconservative for the prestressing strands having a low STSB pullout force. Three simplified bond equations are proposed for the design applications of PC members.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.104-113
• /
• 2022

We present a method to count the overall length of the zoom system in an initial design stage. In a zoom-lens design using the concept of the group, it has been very hard to precisely estimate the overall length at all zoom positions through the previous paraxial studies. To solve this difficulty, we introduce T_eq as a measure of the total track length in an equivalent zoom system, which can be found from the first order parameters obtained by solving the zoom equations. Among many solutions, the parameters that provide the smallest T_eq are selected to construct a compact initial zoom system. Also, to obtain an 8× four-group zoom system without moving groups, tunable polymer lenses (TPLs) have been introduced as a variator and a compensator. The final designed zoom lens has a short overall length of 29.99 mm, even over a wide focal-length range of 4-31 mm, and an f-number of F/3.5 at wide to F/4.5 at tele position, respectively.

• Journal of Fashion Business
• /
• v.13 no.6
• /
• pp.76-88
• /
• 2009

This study has the purposes to search the most visually effective and appropriate number of pleats and skirt length, when it's worn, with the changes in the number of pleats and skirt length that could be influential in analyzing the visual evaluation of pleats skirt and to analyze the changes when those factors are applied in real pattern. The stimuli were 18 samples: 6 variations of the number of pleats and 3 variations of the length of skirt. The data were obtained from 54 fashion design majors. The data were analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study were as follows: The visual image by the number of pleats and the length of skirt were composed of 4 factors : activity, attraction, neatness and commonness. In these factors, activity factor was estimated by the most important factor. The visual image according to the changes in the number of pleats and skirt length had significant differences, and the pleats skirts with 12 and 16 number of pleats and 38cm of skirt length were evaluated to be the most effective. The activity factor had interaction influence effect according to the number of pleats and the skirt length. The skirt length had more influence than the number of pleats in attraction and neatness factors, and the other way around for commonness factor.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.479-484
• /
• 2018

This study is an attempt to analyze the changes and morphological analysis of the one length hair style of women in the Imperial Japanese colonial period, and the purpose of this study is to analyze the components of hair design such as shape, texture, and color based on the precedent and the book and to make possible various styles of one length hair style cut. From the results of this study, one length hair style showed the outline shape with no step height of cut length, natural hair texture and natural hair color in 1910s to 1920s. In the 1930s, the one length hair style showed a slight cut length step height and a slight discoloration using a diamond shape, a narrow wave of natural texture, hydrogen peroxide or oxygenated water. In the 1940s, one length hair style did not find any singularity to pursue brilliant beauty(美) in terms of form, texture, and color. This study may enable a deep and detailed follow up study on one length hair style, and will be a cornerstone for the development of basic data of hair beauty education and trend of new mode.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.43-47
• /
• 2008

This paper is concerned with the analysis of material flow characteristics of stepped rod forming. The analysis in this paper concentrated on the evaluation of the design parameters for deformation patterns of tube forming, load characteristics, extruded length, and die pressure. The design factors such as punch nose radius, die corner radius, friction factor, and punch face angle are involved in the simulation. The stepped rod forming is analyzed by using a commercial finite element code. This simulation makes use of stepped rod material and punch geometry on the basis of punch geometry recommended by International Cold Forging Group. As radius ratio is large, forming load was reduced but extruded length ratio was increased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.405-408
• /
• 2006

The purpose of this study was to determine the optimum length distribution of hybrid PVA(Poly vinyl alcohol) fiber. To produce blended PVA fiber length, first the length distribution of PVA fiber in the cement composites were identified in an experimental study based on simplex lattice design. Among the different length distributions investigated, fiber length was found to have statistically significant effect on plastic shrinkage cracking of cement composites. Subsequently, Complex analysis techniques were used to devise an experimental program that helped determine the optimum combinations of the selected fiber length distribution based on plastic shrinkage crack. The optimum blended PVA length ratio was 0.0146% 4mm fiber, 0.0060% 6-mm fiber, 0.0285% 8-mm fiber, and 0.0209% 12-mm fiber.