• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1729-1737
• /
• 2019

This paper presents neutronics design of VVER-1000 fuel assembly using burnable poison particles (BPPs) for controlling excess reactivity and pin-wise power distribution. The advantage of using BPPs is that the thermal conductivity of BPP-dispersed fuel pin could be improved. Numerical calculations have been conducted for optimizing the BPP parameters using the MVP code and the JENDL-3.3 data library. The results show that by using $Gd_2O_3$ particles with the diameter of $60{\mu}m$ and the packing fraction of 5%, the burnup reactivity curve and pin-wise power distribution are obtained approximately that of the reference design. To minimize power peaking factor (PPF), total BP amount has been distributed in a larger number of fuel rods. Optimization has been conducted for the number of BPP-dispersed rods, their distribution, BPP diameter and packing fraction. Two models of assembly consisting of 18 BPP-dispersed rods have been selected. The diameter of $300{\mu}m$ and the packing fraction of 3.33% were determined so that the burnup reactivity curve is approximate that of the reference one, while the PPF can be decreased from 1.167 to 1.105 and 1.113, respectively. Application of BPPs for compensating the reduction of soluble boron content to 50% and 0% is also investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.705-709
• /
• 2002

The spacer grids in nuclear fuel assembly locate and align the fuel rods with respect to each other. They provide axial and lateral restraint against an excessive rod motion mainly caused by coolant flow. It is understood that each rod Is supported by multiple spacer grid. In such a case, it is important to determine spacer grid span so as to avoid resonance between the natural frequency of the fuel rods and excitation frequency. Actually dynamic characteristics of the fuel rods can be improved by assigning adequate spacer grid locations. When a dynamic performance of the structure is to be improved, design sensitivity analysis plays an important role as like many structural redesign problems. In this work, a shape design concept, different from conventional design, was applied to the problem. According to the theory shape can be a design parameter and optimal shape design can be found. This study concentrates on eigenvalue design sensitivity of the fuel rod supported by multiple spacer grids to determine optimal spacer grids positions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.357-362
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. In this thesis, dynamic characteristics of the steel can labeling machine on the automatic cell assembly line are studied. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed for each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Therefore, Virtual Engineering of the steel can labeling machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• 한국조경학회지
• /
• 제29권5호
• /
• pp.60-70
• /
• 2001

This landscape design proposal was presented to a design competition for Gwangjin-gu Community Center and Assembly Hall. The site is located in 227-7 Jayang-dong, Gwangjin-gu, Seoul and is part a block designated as \`Kunkuk University Detailed Planning District\`. The judging criteria for landscape design set by the Gwangjin-gu could be articulated as follows: an identity of Gwangjin-gu, a relationship with surrounding environment, a locale as a community center of Gwangjin-gu, and an environment-friendly design. An identity of Gwangjin-gu was expressed by introducing lends and decks around the building which were transformed from the image of the old Gwangjin Ferry. The concept\` was strengthened by \`Nori-madang\` or Korean version of \`plaza\` which was designed by a motive of \`mungsuk\` or Korean old fashioned straw mat. An ambiguous relationship between the site and the surroundings was set by \`transparent exhibition frame\` which not only bleaks the massive Chungdam-daegyo, an elevated road, and frames it into small parts, but also attracts pedestrians toward the site-the \`park\`. Pedestrians from the adjacent\` Nengdong-ro Walkable Streets\` views the site through the many parts of frames. By introducing diverse resting and dynamic spaces for many kinds of cultural activities the site could function as a locale of the Gwangjin-gu community. The main paving system reflects the environment- friendly design. It was detailed by \`PC-block-deck-paving\` which was elevated from the ground so that rains could be absorbed.

• 산업공학
• /
• 제4권2호
• /
• pp.81-92
• /
• 1991

A study showed that the two most important obstacles to assembly automation were that product designs are generally not assembly oriented and that most components cannot be handled automatically without problems. In the view of the importance of well designed product with high assemblability, a tool must be developed to pre-evaluate a product during design phase whether it can be assembled with minimum efforts. In this research, a prototype expert system for DFA has been developed that can be used to advise the designer of difficulties that his/her design presents for automatic handling during manufacture. This rule-based system has been implemented on an IBM personal computer, using the Texas Instruments' Personal Consultant Plus.

• 한국실내디자인학회논문집
• /
• 제24권4호
• /
• pp.14-22
• /
• 2015

This study deals with a comparative analysis of wooden assembly methods between Japanese traditional architecture and Kuma, Kengo's works. Kuma, Kengo has known as an architect who pursues Japanese architectural traditions with integrated solutions for built and natural environments, and expresses a deep commitment to unexpected use of materials such as stone and wood with the clarity of structural solutions. Accordingly, his architecture focuses on the appreciation of the spatial relationship with the surrounding, its local characters, and the selection of materials. This article first examines two of wooden assembly methods that have been shown in Japanese traditional architecture such as 'two-way system' and 'one-way system'. And then, Kuma, Kengo's wooden assembly methods in his works are analyzed and compared in relation to Japanese wooden assembly methods to find out similarities and differences between them. Then, it concludes that Kuma, Kengo's approach is not only relying on the methods of Japanese traditional architecture, but also exploring creative ways beyond traditional assembly methods.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.911-919
• /
• 2021

In this paper, the design stress intensity values for the plate-type fuel assembly for research reactor are presented. Through a tensile test, the material properties of the cladding (aluminum alloy 6061) and structural material (aluminum alloy 6061-T6), in this case the yield and ultimate tensile strengths, Young's modulus and the elongation, are measured with the temperatures. The empirical equations of the material properties with respect to the temperature are presented. The cladding undergoes several heat treatments and hardening processes during the fabrication process. Cladding strengths are reduced compared to those of the raw material during annealing. Up to a temperature of 150 ℃, the strengths of the cladding do not significantly decrease due to the dislocations generated from the cold work. However, over 150 ℃, the mechanical strengths begin to decrease, mainly due to recrystallization, dislocation recovery and precipitate growth. Taking into account the uncertainty of the 95% probability and 95% confidence level, the design stress intensities of the cladding and structural materials are established. The presented design stress intensity values become the basis of the stress design criteria for a safety analysis of plate-type fuels.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.590-592
• /
• 2008

A spacer grid is one of the most important structural components in a LWR nuclear fuel assembly. The primary considerations are to provide a Zircaloy spacer grid with crush strength sufficient to resist design basis loads, without significantly increasing pressure drop across the reactor core. In this study, the dynamic crush strength analysis and test are carried out for the specimens of a spacer grid assembly.

• 한국경영과학회지
• /
• 제18권2호
• /
• pp.1-22
• /
• 1993

This paper deals with the problem of mixed model assembly line balancing. In mixed model assembly lines, tsks should be assigned to stations in such a manner that all stations have approximately the same amount of work on a production cycle basis. Further in balancing assembly lines, the related tasks, the performing task side and the team tasks should be considered to improve work methods, to give more job satisfaction to workers, and to allow greater flexibility in the design of assembly lines. In this paper, the heuristic dispatch assignment rule is developed to assign evenly tasks of each model to all stations. The heuristic method based on the assignment rule developed is presented for mixed model assembly line balancing with the considerations of the related tasks, the performing task side, and the team tasks. The proposed method is analyzed, and compared with other methods for line balancing.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3395-3403
• /
• 1994

The structural test technique and equipment for strength test of astronautical structures, such as rocket, were presented in this paper. Structural strength tests of the fin assembly with fin and fin frame in the scientific sound rocket were performed with load levels of 100% limit load and 150% ultimate load of design lift force. Safety factors in each part of the fin assembly were calculated at these two load levels and the stiffnesses based on the measured deflection of fin assembly and strains on fin and fin frame were evaluated at these two load level. As the result of structural test, the fin assembly was estimated to be safe.