• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.300-308
• /
• 2010

This paper describes the development of a low-power electrocardiogram (ECG) touch sensor intended for the use with two dry metal electrodes. An equivalent ECG extraction circuit model encountered in a ground-free two-electrode configuration is investigated for an optimal sensor read-out circuit design criteria. From the equivalent circuit model, (1) maximum sensor resolution is derived based on the electrode's background thermal noise, which originates from high electrode-skin contact impedance, together with the input referred noise of instrumentation amplifier (IA), (2) 60 Hz electrostatic coupling from mains and motion artifact are also considered to determine minimum requirement of common mode rejection ratio (CMRR) and input impedance of IA. A dedicated ECG read-out front end incorporating chopping scheme is introduced to provide an input referred circuit noise of 1.3 ${\mu}V_{rms}$ over 0.5 Hz ~ 200 Hz, CMRR of IA > 100 dB, sensor resolution of 7 bits, and dissipating only 36 ${\mu}W$. Together with 8 bits synchronous successive approximation register (SAR) ADC, the sensor IC chip is implemented in 0.18 ${\mu}m$ CMOS technology and integrated on a 5 cm $\times$ 8 cm PCB with two copper patterned electrodes. With the help of proposed touch sensor, ECG signal containing QRS complex and P, T waves are successfully extracted by simply touching the electrodes with two thumbs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.986-991
• /
• 2014

The PPG signal used in mobile-healthcare and telemedicine system is including the various motion artifact that is signal generated from patient's movements. Recently, although the various methods to remove motion artifacts have been suggested, the performances of these methods are still not satisfactory. Therefore, this s study suggested the novel method based on the Kalman filter and adaptive filter to remove motion artifacts, and we used various motion artifacts to analyze the performance of the proposed method. In the results of experiments, the signal-to-noise ratio of proposed method showed good performace that was 4.8 times of moving average filter.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.43-50
• /
• 2007

In recent years the importance of the preservation of cultural artifacts like ancient tombs has been widely accepted domestically and internationally with increasing value of cultural artifacts. However not much technical attention has been paid for the facilities and systems to preserve these artifacts. As a part of the present study, the temperature and relative humidity inside a selected artifact, Shinkwan-ri tomb, have been monitored for a year round to improve the understanding of the indoor thermal environment. In this study, using the Computational Fluid Dynamics calculated the velocity and temperature distribution and offered basic data which are necessary for the best fitted design of tomb air-conditioning device. Through the result of this study, the generation of temperature variation was identified by natural convection. It enables us to get the possibility of humidity variation

• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.185-190
• /
• 2006

JPEG 2000 is used as an alternative to solve the blocking artifact problem with the existing still image compression JPEG algorithm. However, it has shortcomings such as longer floating point computation time and more complexity in the procedure of enhancing the image compression rate and decompression rate. To compensate for these we implemented with hardware the JPEG 2000 algorithm's filter part which requires a lot of floating point computation. This DWT Filter[1] chip is designed on the basis of Daubechies 9/7 filter[6] and is composed of 3-stage pipeline system to optimize the performance and chip size. Our implemented Filter was 7 times faster than software based Filter in the floating point computation.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.27-34
• /
• 2023

This paper studied the 3D modeling process for the restoration of the 'Three-story Stone Pagoda of Bulguksa Temple in Gyeongju', a stone pagoda from the Unified Silla Period, using artificial intelligence (AI). Existing 3D modeling methods generate numerous verts and faces, which takes a considerable amount of time for AI learning. Accordingly, a method of performing more efficient 3D modeling by lowering the number of verts and faces is required. To this end, in this study, the structure of the stone pagoda was deeply analyzed and a modeling method optimized for AI learning was studied. In addition, it is meaningful to propose a new 3D modeling methodology for the restoration of stone pagodas in Korea and to secure a data set necessary for artificial intelligence learning.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.143-148
• /
• 2022

For the purpose of treating health checkups and recovery of patients in a super-aged society, hospitals use devices designed with a reduction circuit of electromagnetic waves associated with the specific absorption rate of electromagnetic waves absorbed by the human body. In this paper, we proposed a filter improvement design method capable of reducing electromagnetic waves. As a result of confirming the validity of the proposed technique through simulation and experimental results, the following result values were obtained. Applying the common-mode (CM) inductor 4 mH to a calibration circuit, noise decreased in a multiband spectrum. Using the differential mode(DM) inductor 40 µH element in the primary calibration circuit, the noise decreased by 15 dB or more in the 3 MHz band spectrum. Also, applying the Admittance Capacitance (Y-Cap) 10 nF element in the secondary calibration circuit resulted in the decrease by more than 30 dB in the band spectrum before 2 MHz. After using a common-mode inductor 4 mH element in the tertiary calibration circuit, it decreased by more than 15 dB in the band spectrum after 2 MHz.

• Archives of design research
• /
• v.17 no.4
• /
• pp.375-384
• /
• 2004

The general tendency of approach to Korean Design History has been focusing its primary interest on the grand story in relation to the problems of modernization in political, economical and social aspects of Korea. In the discourse of modernization, however, there are two sides immanent in the modernization: there is the formal, institutional and authoritative modernization developed inside the capitalistic mode of production and the informal, individual and cultural modernization manifested in the mode of everyday lives. Especially, despite the viewpoint of the latter being embossed as an alternative approach in various areas including the academic world of history since the collapse of socialism, the historical recognition of the phenomena of modern design by the Korean design historians is more like the 'history from the above' that exists at the level of the discourse outside the reality rather than the 'history from the below' that exists within the ordinary life. To grant a sense of balance in such frame of historical understanding, it requires the restructuring the design history of Korea through the cultural perspectives from having the representation of mundane lives realized by the voluntary design activity of the common people as research subjects. One of the methods to acquire an answer to such problem is decoding, in the manner of 'cultural history', the life-long domestic artifact made by Madame Yang, Gap Jo (currently 87 years of age) who is a model of typical Korean mother. Through the historical rumination on the traces of unpretentious lives of the people that has been buried under the grand narrative of the Korean Design History, a new era aimed for the historical prospect of Korean design as cultural history will be possible by excavating the petit yet multi-layered meaning of Korean designs.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.467-474
• /
• 2010

Recently, Study of functional clothing for Vital sensing is focused on reducing artifact by human motions, in order to enhance the electrocardiogram(ECG) sensing accuracy. In this study, considering the factors for each element found from the analysis, a 3-lead electrode inside textile embroidered with silver yarn was developed, and draft designs off our types of vital-signal sensing garments, which are 'chest-belt typed' garment, 'cross-typed' garment 'x-typed' garment and 'curved x-typed' garment, were prepared. The draft designs were implemented on a sleeveless male shirt made of an elastic material so that the garment and the electrodes can remain closely attached along the contour of the human body, and the acquired data was sent to the main computer over a wireless network. In order to evaluate the effects caused by body movements and the ECG-sensing capability for each type in static and dynamic states, displacements were measured from one and two dimensional perspectives. ECG measurement evaluation was also performed for Signal-to-noise ratio(SNR) analysis. Applying the experimental results, the draft garment designs were modified and complemented to produce two types of modular approaches 'continuous-attached' and 'insertion-detached' for the ECG-sensing smart clothing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.662-672
• /
• 2011

This paper presents a new edge-preserving algorithm and its VLSI architecture for block artifact reduction. Unlike previous approaches using block classification, our algorithm utilizes pixel classification to categorize each pixel into one of two classes, namely smooth region and edge region, which are described by the edge-preserving maps. Based on these maps, a two-step adaptive filter which includes offset filtering and edge-preserving filtering is used to remove block artifacts. A pipelined VLSI architecture of the proposed deblocking algorithm for HD video processing is also presented in this paper. A memory-reduced architecture for a block buffer is used to optimize memory usage. The architecture of the proposed deblocking filter is prototyped on FPGA Cyclone II, and then we estimated performance when the filter is synthesized on ANAM 0.25 ${\mu}m$ CMOS cell library using Synopsys Design Compiler. Our experimental results show that our proposed algorithm effectively reduces block artifacts while preserving the details.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.2
• /
• pp.63-78
• /
• 2017

The purposes of this study was to study Turkic clothing traditions as a way to shed light on cultural development via the interactions among different tribes along the Silk Road, the close correlations between the surroundings of the Turks and their costumes, and the root of Turkic culture through literature studies and empirical studies. The study results are as follows. First, the Turks were nomadic equestrian tribes in the north that dominated the cold dry steppes from the $6^{th}$ to $8^{th}$ century A.D., when they expanded their influence to Dongbei, China to the east, and Turkistan (Central Asia) to the west. The Turks formed a nomadic lifestyle and culture suited to a cold dry climate, and interacted with various other tribes via the Silk Road, while exchanging and sharing different cultural aspects. Second, given that the Turkic garments constitute a two-piece style, which is a category of the basic nomadic costume of northern tribes, and that the artifact materials manifest jackets, overcoats, pants and skirts, the garments are categorized into tops and bottoms. The tops are sub-categorized into jackets and overcoats. The bottoms are sub-categorized into pants and skirts. In light of the necklines of tops, jackets have round necklines, while overcoats have V-necklines, round necklines and lapel collars. The bottoms include narrow-legged pants, wide-legged pants and closed-hem pants. Drapery skirts are worn at the waist. Third, the Turkic V-neckline overcoat is comparable to the Huns' silk overcoat, which illustrates the ethnic link between the two tribes. Also, the Turkic narrow- and wide-legged pants are consistent with the Huns' silk pants discovered in Noin Ula. The Turkic costumes are mostly tight fitting, suitable for the nomadic lifestyle in a cold, dry climate. Also, additional patches must be attached to the crotch points of pants due to the equestrian lifestyle.