• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.3
• /
• pp.129-145
• /
• 2019

For the design of composite breakwater as representative one of the coastal and harbor structures, it has been widely discussed by the researchers about the relation between the behavior of excess-pore-water pressure inside the rubble mound and seabed caused by the wave load and its structural failure. Recently, the researchers have tried to verify its relation through the numerical simulation technique. The above researches through numerical simulation have been mostly applied by the linear and nonlinear analytic methods, but there have been no researches through the numerical simulation by the strongly nonlinear mutiphase flow analytical method considering wave-breaking phenomena by VOF method and turbulence model by LES method yet. In the preceding research of this study, olaFlow model based on the mutiphase flow analytical method was applied to the nonlinear interaction analysis of regular wave-composite breakwater-seabed. Also, the same numerical techniques as preceding research are utilized for the analysis of irregular wave-composite breakwater-seabed in this study. Through this paper, it is investigated about the horizontal wave pressures, the time variations of excess-pore-water pressure and their frequency spectra, mean flow velocities, mean vorticities, mean turbulent kinetic energies and etc. around the caisson, rubble mound of the composite breakwater and seabed according to the changes of significant wave height and period. From these results, it was found that maximum nondimensional excess-pore water pressure, mean turbulent kinetic energy and mean vorticity come to be large equally on the horizontal plane in front of rubble mound, circulation of inflow around still water level and outflow around seabed is formed in front of rubble caisson.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.39-46
• /
• 2020

Composite electrodes for rechargeable batteries generally consist of active material, electric conductor, and polymeric binder. And their composition and distribution within the composite electrode determine the electrochemical activity in the electrochemical systems. However, it is not easy to quantify the physical properties of composite electrodes themselves using conventional experimental analysis tools. So, 3D structural modeling and simulation can be an efficient design tool by looking into the contact areas between particles and electric conductivity within the composite electrode. In this study, while maintaining the composition (LiCoO₂ : Super P Li^® : Polyvinylidene Fluoride (PVdF) = 93 : 3 : 4 by wt%) and loading level (13 mg cm^-2) of the composite electrode, the effects of LiCoO₂ size (10 ㎛ and 20 ㎛) and electrode density (2.8 g cm^-3, 3.0 g cm^-3, 3.2 g cm^-3, 3.5 g cm^-3, 4.0 g cm^-3) on the physical properties are investigated using a GeoDict software. With this tool, the composite electrode can be efficiently designed to optimize the contact area and electric conductivity.

• Radiation Oncology Journal
• /
• v.10 no.2
• /
• pp.171-180
• /
• 1992

The precise role of radiotherapy for low grade gliomas including the optimal radiation dose and timing of treatment remains unclear. The information given by a retrosepctive analysis may be useful in the design of prospective randomized studies looking at radiation dose and time of surgical and radiotherapeutic treatment. The records of 56 patients (M:F = 29:27) with histologically verified cerebral low grade gliomas (47 cases of grade 1 or 2 astrocytomas and 9 oligodendrogliomas) diagnosed between 1979 and 1989 were retrospectively reviewed. The extent of surgical tumor removal was gross total or radical subtotal in 38 patients ($68\%$) and partial or biopsy only in the remaining 18 patients ($32\%$). Postooperative radiation therapy was given to 36 patients ($64\%$) of the total 56 patients with minimum dose of 5000 cGy (range=1250 to 7220 cGy). The 5-and 10-year survival rates for the total 56 patients were $44\%$ and $32\%$ respectively with a median survival of 4.1 years. According to the histologic grade the 5- and 10-year survivals were $52\%$ and $35\%$ for the 24 patients respectively with grade I astrocytomas compared to $20\%$ and $10\%$ for the 23 patients with grade II astrocytomas. Survival of oligodendroglioma patients was greater than those with astrocytoma ($65\%$ vs $36\%$ at 5 years), and the difference was also remarkable in the long term period of follow up ($54\%$ vs $23\%$ at 10 years). Those who received high-dose radiation therapy ($\geq$5400 cGy) had significant better survival than those who received low-dose radiation (< 5400cGy) or surgery alone (p<0.05). The 5- and 10-year survival rates were, respectively $59\%$ and $46\%$ for the 23 patients receiving high-dose radiation, $36\%$ and $24\%$ for the 13 patients receiving low-dose radiation, and $35\%$ and $26\%$ for the 20 patients with surgery alone. Survival rates by the extent of surgical resection were similar at 5 years ($46\%$ vs $41\%$), but long term survival was quite different (p<0.01) between total/subtotal resection and partial resection/biopsy ($41\%$ and $12\%$, resepctively). Previously published studies have identified important prognostic factors in these tumor: age, extent of surgery, grade, performance status, and duration of symptoms. But in our cases statistical analysis revealed that grade I histology (p<0.025) and young age (p<0.001) were the most significant good prognostic variables.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.49-63
• /
• 2010

This study was intended to analyze and interpret the pattern of naming the domestic apartment brand from a semiologic viewpoint in a bid to review the meaning and value of apartment brand, while on the other hand, evaluating the characteristics of persuasive message pursued by current apartment brand in 2010, and consequently, the conclusion of the study is outlined as follows. 1. As a result of analyzing the coinage of branding naming, the words such as combination, joint and blending pattern tended to dominate, which seemed to attempt to represent the variety of values of the housing culture. Brand ideation tends to stress the character symbolism and polysemic message using syllepsis, and the experimental attempt to revive the traditional dwelling concept in a modern sense in a way of combining the archaic word with the Chinese character was found as well. 2. As a result of analyzing the frequency of verbal identity and lexeme of domestic apartments, those frequently used are in order of ville, nature, beauty(美), park, hi, green, palace(宮), nobility and center(tra), which are the lexemes representing the landscape, view, nature and dignity. 3. As a result of identifying the pattern of lexeme using analysis frame based on existing researches such as apartment brand positioning, the most important external core concepts controlling the direction and value of apartment brand are 'environment-orientated' and 'emotion-orientated', and internally, 'function-oriented'. Given the persuasive language expressing the 'environment-oriented' feature and the priority of brand lexeme are garden, park, view and the nature, a landscape-oriented persuasive message is seen to be surging in brand naming. 4. An emotion-oriented persuasive language such as dignity axis having major lexeme represented by palace, nobility, class and a pride axis having major semantic elements represented by human, I and you are used as major value concepts and persuasive language that lead domestic apartment brands to differentiation and upgradation. 5. Among the lexemes focusing on view from environment-oriented standpoint, hi, hill, tower, view, mark, heights are the trend pursued by high-rise apartment aiming at the view such as residential-commercial apartment, and thus the persuasive language focusing on high-rise concept is expected to become the element dominating the trend of apartment brand for the time being.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.280-286
• /
• 2012

Clean energy farming is the agricultural activity to improve an efficiency of agricultural energy use and to replace fossil fuels. This study was carried out to establish the clean energy farming system in the controlled cultivation of vegetable crop (cucumber) adopting the biogas production facility. In order to design the clean energy farming system, mass and energy balance was analyzed between the controlled cultivation system and the biogas production facility. Net yearly heating energy demands ($E_{YHED}$) of forcing and semi-forcing cultivation types were 48,697 and $13.536Mcal\;10^{-1}$ in the controlled cultivation of vegetable cucumber. To cover these $E_{YHED}$, the pig slurry of 511 and $142m^3\;10a^{-1}$ (biogas volume of 9,482 and $2,636Nm^3\;10a^{-1}$, respectively, as 60% methane content) were needed in forcing and semi-forcing cultivation types. The pig slurry of $511m^3\;10a^{-1}$ caused N 1,788, $P_2O_5$ $511kg\;10a^{-1}$ in the forcing cultivation type, and the pig slurry of $142m^3\;10a^{-1}$ caused N 497, $P_2O_5$ $142kg\;10a^{-1}$ in the semi-forcing cultivation type. The daily heating energy demand ($E_{i,DHED}$) by the time scale analysis showed the minimum $E_{i,DHED}$ of $7.7Mcal\;10a^{-1}\;day^{-1}$, the maximum $E_{i,DHED}$ of $515.1Mcal\;10a^{-1}\;day^{-1}$, and the mean $E_{i,DHED}$ of 310.2 in the forcing cultivation type. And the minimum $E_{i,DHED}$, the maximum $E_{i,DHED}$, and the mean $E_{i,DHED}$ were 5.3, 258.0, and $165.1Mcal\;10a^{-1}\;day^{-1}$ in the semi-forcing cultivation type, respectively. Input scale of biogas production facility designed from the mean $E_{i,DHED}$ were 3.3 and $1.7m^3\;day^{-1}$ in the forcing and the semi-forcing cultivation type. The maximum $E_{i,DHED}$ gave the input scale of 5.4 and $2.7m^3\;day^{-1}$ in the forcing and the semi-forcing cultivation type.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.27-33
• /
• 2013

In order to provide basic data for the development of a controlled environment cultivation system and standardization of the structures, structural status and improvement methods were investigated for the fruit tree greenhouses of grape, pear, and peach. The greenhouses for citrus and grape cultivation are increasing while pear and persimmon greenhouses are gradually decreasing due to the advance of storage facilities. In the future, greenhouse cultivation will expand for the fruit trees which are more effective in cultivation under rain shelter and are low in storage capability. Fruit tree greenhouses were mostly complying with standards of farm supply type models except for a pear greenhouse and a large single-span peach greenhouse. It showed that there was no greenhouse specialized in each species of fruit tree. Frame members of the fruit tree greenhouses were mostly complying with standards of the farm supply type model or the disaster tolerance type model published by MIFAFF and RDA. In most cases, the concrete foundations were used. The pear greenhouse built with the column of larger cross section than the disaster tolerance type. The pear greenhouse had also a special type of foundation with the steel plate welded at the bottom of columns and buried in the ground. As the results of the structural safety analysis of the fruit tree greenhouses, the grape greenhouses in Gimcheon and Cheonan and the peach greenhouses in Namwon and Cheonan appeared to be vulnerable for snow load whereas the peach greenhouse in Namwon was not safe enough to withstand wind load. The peach greenhouse converted from a vegetable growing facility turned out to be unsafe for both snow and wind loads. Considering the shape, height and planting space of fruit tree, the appropriate size of greenhouses was suggested that the grape greenhouse be 7.0~8.0 m wide and 2.5~2.8 m high for eaves, while 6.0~7.0 m wide and 3.0~3.3 m of eaves height for the pear and peach greenhouses.

• Journal of Korean Home Economics Education Association
• /
• v.15 no.3
• /
• pp.89-103
• /
• 2003

The purpose of this study was to investigate to relation of necessity and practice of contents of clothing and textiles education(classify them into four units, choice and dressing of clothes, textile and management of clothes, design and sewing of clothes, knitting and embroidery). Method of posing a questionnaire is adopted to obtain stochastic data required for pertinent analysis. This is the investigation of which 400 (high school students 204, university students 196) girl students located in Choongnam and Junrabookdo province. In this statistical analysis, SPSS 10.0 for Windows Program was utilized to calculate percentage, mean and standard deviation. Also, these materials were verified by t-test, One-way Anova, Pearson's correlation coefficient. The results of this research were as follows. First, girl students' necessity mean point were higher than practice mean point about the contents of clothing and textiles education. And necessity had a positive relationship with practices of contents of clothing and textiles education. Second, there was a significant difference in necessity and practice of contents of clothing and textiles education according to demographic variables. These results should be provide fundamental information for improving students' critical practice in their real life. Since this study has touched only limited research on the topic of clothing and textiles education, it is essential that further research covering a wider array of themes be done in the future. this study has touched only limited research on the topic of clothing and textiles education, it is essential that further research covering a wider array of themes be done in the future.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.131-153
• /
• 2016

The purpose of this study was to derive evaluator's role and capability for institution accreditation evaluation of NCS-based vocational competency development training. This study attempted to explore in various ways evaluator's minute roles using Delphi method, and to derive knowledge, skill, attitude and integrity needed to verify the validity. To the end, this study conducted the Delphi research for over three rounds by selecting education training professionals and review evaluation professions as professional panels. From the results, roles of evaluators were defined as the total eight items including operator, moderator-mediator, cooperator, analyzer, verifier, institution evaluator, institution consultant, and learner, and the derived capabilities with respect to each role were 25 items in total. The area of knowledge included four items of capabilities such as HRD knowledge, NCS knowledge, knowledge of vocational competency development training, and knowledge of training institution accreditation evaluation, and the area of skill comprised fourteen items of capabilities such as conflict management ability, interpersonal relation ability, word processing ability, problem-solving ability, analysis ability, pre-preparation ability, time management ability, decision making ability, information comprehension and utilization ability, comprehensive thinking ability, understanding ability of vocational competency development training institutions, communication ability, feedback ability, and core understanding ability. The area of attitude was summarized with the seven items in total including subjectivity and fairness, service mind, sense of calling, ethics, self-development, responsibility, and teamwork. The knowledge, skill and attitude derived from the results of this study may be utilized to design and provide education programs conducive to qualitative and systematic accreditation and assessment to evaluators equipped with essential prerequisites. It is finally expected that this study will be helpful for designing module education programs by ability and for managing evaluator's quality in order to perform pre-service education and in-service education according to evaluator's experience and role.

• Journal of Korean Biological Nursing Science
• /
• v.4 no.1
• /
• pp.25-39
• /
• 2002

The purpose of this study is to develop and evaluate a web-based instruction Program(WBI) to help nurses improving their knowledge and skill of cardiopulmonary resuscitation. Using the model of web-based instruction(WBI) program designed by Rhu(1999), this study was carried out during February-April 2002 in five different steps; analysis, design, data collection and reconstruction, programming and publishing, and evaluation. The results of the study were as follows; 1) The goal of this program was focused on improving accuracy of knowledge and skills of cardiopulmonary resuscitation. The program texts consists of the concepts and importances of cardiopulmonary resuscitation(CPR), basic life support(BLS), advanced cardiac life support(ACLS), treatment of CPR, nursing care after CPR treatment. And in the file making step, photographs, drawings and image files were collected and edited by web-editor(Namo), scanner and Adobe photoshop program. Then, the files were modified and posted on the web by file transfer protocol(FTP). Finally, the program was demonstrated and once again revised by the result, and then completed. 2) For the evaluation of the program, 36 nurses who in K university hospital located in D city, and related questionnaire were distributed to them as well. Higher scores were given by the nurses in its learning contents with $4.2{\pm}.67$, and in its structuring and interaction of the program with $4.0{\pm}.79$, and also in its satisfactory of the program with $4.2{\pm}.58$ respectively. In conclusion, if the contents of this WBI educational program upgrade further based upon analysis and applying of the results the program evaluation, it is considered as an effective tool to implement for continuing education as life-long educational system for nurse.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.329-352
• /
• 2005

Long term observations of full-disk Lyman-o irradiance have been made by the instruments on various satellites. In addition, several sounding rockets dating back to the 1950s and up through the present have measured the $Lyman-{\alpha}$ irradiance. Previous full disk $Lyman-{\alpha}$ images of the sun have been very interesting and useful scientifically, but have been only five-minute 'snapshots' obtained on sounding rocket flights. All of these observations to date have been snapshots, with no time resolution to observe changes in the chromospheric structure as a result of the evolving magnetic field, and its effect on the Lyman-o intensity. The $Lyman-{\alpha}$ Imaging Solar Telescope(LIST) can provide a unique opportunity for the study of the sun in the $Lyman-{\alpha}$ region with the high time and spatial resolution for the first time. Up to the 2nd year development, the preliminary design of the optics, mechanical structure and electronics system has been completed. Also the mechanical structure analysis, thermal analysis were performed and the material for the structure was chosen as a result of these analyses. And the test plan and the verification matrix were decided. The operation systems, technical and scientific operation, were studied and finally decided. Those are the technical operation, mechanical working modes for the observation and safety, the scientific operation and the process of the acquired data. The basic techniques acquired through the development of satellite based solar telescope are essential for the construction of space environment forecast system in the future. The techniques which we developed through this study, like mechanical, optical and data processing techniques, could be applied extensively not only to the process of the future production of flight models of this kind, but also to the related industries. Also, we can utilize the scientific achievements which are obtained throughout the project And these can be utilized to build a high resolution photometric detectors for military and commercial purposes. It is also believed that we will be able to apply several acquired techniques for the development of the Korean satellite projects in the future.