• Design & Manufacturing
• /
• 제14권4호
• /
• pp.46-51
• /
• 2020

The purpose of this study was to analyze the change in tensile strength characteristics of the weld when the welding speed and rotational speed of the tool, which are representative variables of the friction stir welding process. The equipment used in the experiment was Machining Center No. 5. The material used in the experiment is an AA6061-T6 alloy, and a rolled plate with a thickness of 2mm was used. Two experimental variables were selected, the welding speed of the tool and the rotational speed of the tool. The experimental conditions were selected in the range in which a healthy weld could be obtained through a preliminary experiment. The welding speed of the tool was increased to 100mm/min, 200mm/min, and 300mm/min, and the rotational speed of the tool was increased to 1000rpm, 2000rpm, and 3000rpm. As a result of the experiment, the tensile strength increased as the rotational speed of the tool changed at each tool welding speed. In addition, as the welding speed of the tool increased, the tensile strength of the weld was increased. The condition with the highest tensile strength of the weld was found to be a tool feed speed of 300 mm/min and a tool rotation speed of 3000rpm.

• 한국산업융합학회 논문집
• /
• 제20권1호
• /
• pp.74-80
• /
• 2017

This study aimed to evaluate the validity of an exhausted injector design for filtration system and the performance characteristics thereof. The evaluation was intended through computational fluid dynamics(CFD) analysis based on computer simulation rather than through prototype fabrication and testing. Furthermore, the design of experiment was used to create an experimental design table by which the reaction characteristics of response factors were analyzed for design parameters. All experiments were substituted with computer simulations. Lastly, an optimal design model for the injection tubes was determined based on response surface method algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.872-873
• /
• 2008

In this paper, a new type of switchgear, electro magnetic force driving actuator (EMFA), is developed and analyzed, applicable to high voltage gas circuit breaker (HGCB). Transient analysis is performed in order to obtain the dynamic characteristics of the EMFA. The distribution of static magnetic flux is obtained using the finite element method (FEM). The governing electric and kinematical equations are solved using the time difference method (TDM). Fabrication and experiments were performed in order to prove the applicability of HGCB for overall class. In comparing the experiment with simulated data, it is confirmed that analysis of the dynamic characteristics of EMFA is appropriate for design.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.162-170
• /
• 2005

Although the numbers of pedestrian fatalities and injuries are steadily declining worldwide, pedestrian protection is still an important issue. Extensive researches have been carried out in the field of pedestrian protection in order to establish pedestrian safety regulations. The automobile hoods and bumpers, which pedestrians frequently run into during accidents, should be safely designed for pedestrians. Two analysis methods are utilized to design safe structures of the hood and the bumper. They are real experiment and computer simulation. In this research, a method is developed to simultaneously utilize the results from the experiment and the simulation. For design, orthogonal arrays are employed to combine the two methods. Based on this method, a hood and a bumper are designed to protect pedestrians.

• 한국전자통신학회논문지
• /
• 제15권4호
• /
• pp.765-772
• /
• 2020

현재 사용되는 일반적인 교육용 과학실험교구들은 정밀한 측정이 불가능하며 MBL 실험교구일지라도 센서중심의 프로그램으로 구성되어 있으며 데이터 확보에만 주력하여 능동적인 실험설계가 힘들다. 이 연구는 교육과정 분석을 통해 소프트웨어 융합 실험설계가 가능한 과학실험교구 시스템을 구상하고 기존 실험의 한계점을 보완하여 MBL기반 과학실험교구의 전체 시스템 아키텍처와 프레임 및 기구부를 설계한 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.423-426
• /
• 2005

The injection molding process has applied to a variety of fields by a development of various plastic resins. Recently, this process has been extending to a field of parts of shoes. In this study, the injection mold of shank which is a one of the parts of shoes has been designed. The position of gate and the injection procedure have been optimized by a simulation using the CAE software and an analysis using the DOE. As a result, the improved injection mold of shank has been manufactured in a short time. Appling the CAE and the DOE at the process of the injection mold design eventually lead an increase in the productivity and the quality of parts.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.137-137
• /
• 2000

In this research. we developed Tire Roller Prototype which is operated hydraulic transmission system. For develop the theoretically computer aided system, we practiced the simulation of hydraulic system and dynamic modeling and will compare with the experiment results of Tire Roller Prototype. We conceptualize the new hydraulic system and derive the equations of motion for dynamic analysis. Finally, we will design the controller, which can manage the hydraulic circuit of servo mechanism system. We define new hydraulic system and integrate modeling of Tire Roller through simulation of h\ulcornerdraulic system and design of controller. From above procedure. Hydraulic transmission system characteristics and target performance can be investigated. To follow the required performance, we select the parts of Tire Roller. We manufactured the prototype of Tire Roller, and will install the equipment for experiment.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.179-186
• /
• 2022

In this paper, we design a heart rate measurement system using a web camera. In order to measure the heart rate, face image information is acquired and classified. The face image data is collected from web camera. The heart rate is measured using the collected face image data. We design a function to measure heart rate using input of face information using a web camera in non-contact manner. We design a function that reads face information and estimates heart rate by analyzing face color. An experiment was performed to compare the non-contact heart rate with the actual measured heart rate. The heart rate measurement system using a web camera proposed in this paper is a technology that can be used in various fields. It will be used in sports fields that require heart rate measurement at a low cost.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.951-958
• /
• 2013

This paper proposes the controller design for a stability improvement of an on-board battery charger. The system is comprised of a power factor correction (PFC) circuit and phase shift full-bridge DC-DC converter. The PFC circuit performs the control of the DC-link voltage and the input power factor. The DC-DC converter regulates the voltage and the current in the battery using the DC-link voltage. This paper proposes the design method of PI controller for the PFC circuit using a small signal model. The analysis and design of a type-three controller for the DC-DC converter is also presented. A simulation and experiment has been performed on the on-board battery charger and their results are presented to verify the validity of the proposed system.

• 복식
• /
• 제22권
• /
• pp.333-344
• /
• 1994

In this study an experiment was made using the function of computer simulation os to whether the phenomenon of optical illusion takes place also in clothing on the human body three-dimensional space through the case study of the Gestalt illusion of planar con-traction and expension by amodal completion in perceptual organization. One woman of latter 30s was selected as the experimental subject. She was made to wear the experimental clothing and then the frontal picture was projected of in the experimental clothing which was scanned into the com-puter. For the sake of the contractive experiment 5 stages were divided by 5-15cm the thick-nes of the black vertical line in the center of the upper garmet as the variable and for the sake of the expansive experiment the skirt length was set as the variable. It length measured 50-90cm which was divided by 10cm into 5 stages and simulated using the CAD. The basic design and the experimental de-sign were made one pair and the pictures totalled 20 pictures such as ten pictures save the human body for the estimation of the up-per garmet alone and ten pictures for the ob-servation of the effect on the human body. The extimating panel consisting of 20 panellers estimated contraction/expansion in the estimation of the upper garmet and the tall effect/the slim effect in the estimation of optical illusion as the estimating factors on the 9-point scale. All the date from experiment were analyzed by ANOVA(analysis of variance) and DUNCAN'S multiple range. As a result the experimental designs all showed a significant optical illusion in comparision with the basic design.