• Composites Research
• /
• 제31권6호
• /
• pp.340-346
• /
• 2018

본 연구에서는 20mm 범용탄약적재장비의 운행 시 탄약의 운동에 관여하는 이중리드나선의 설계를 위해 이중리드나선에 발생하는 응력과 변형에 대하여 ABAQUS 프로그램을 이용해서 해석한다. 해석을 위해 복합재를 적용한 나선형 물체의 회전 시 발생하는 응력 해석의 타당성을 확인한다. 이중리드나선의 재료를 일반 금속과 복합재로 적용하여 해석하고 모델을 복합재료로 대체 하였을 때 이점을 제시한다. 또한 복합재료의 적층각과 적층순서, 회전속도의 변경 시에 발생하는 응력과 변형을 예측하고, Tsai-Wu failure 이론에 해석결과를 적용하여 파손을 확인하며. 탄약적재시 스텝의 개발을 위한 복합재 이중나선구조의 설계결과를 제시한다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.343-346
• /
• 2003

A new structure to design low pass filters (LPFs) is presented rho proposed structure has the etched shape of Quad-Spiral DGS(Defected Ground Structure) on microstrip transmission lines. By extracting the equivalent circuit elements of unit Quad-Spiral DGS, LPFs are designed easily. The equivalent circuit of Quad-Spiral DGS consists of a step impedance resonator and lumped elements. The proposed LPF provided steep rejection characteristics with 5-poles. Experimental results show excellent agreements with circuit simulation results in wide band and the validity of our circuit modeling for LPF design. The result shows another possibility of Quad Spiral DGS for microwave devices.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.683-699
• /
• 2015

Time Domain Reflectometry (TDR) has been extensively applied for various laboratory and field studies. Numerous different TDR probes are currently available for measuring soil moisture content and detecting interfaces (i.e., due to landslides or structural failure). This paper describes the development of an innovative spiral-shaped TDR probe that features much higher sensitivity and resolution in detecting interfaces than existing ones. Finite element method (FEM) simulations were conducted to assist the optimization of sensor design. The influence of factors such as wire interval spacing and wire diameter on the sensitivity of the spiral TDR probe were analyzed. A spiral TDR probe was fabricated based on the results of computer-assisted design. A laboratory experimental program was implemented to evaluate its performance. The results show that the spiral TDR sensor featured excellent performance in accurately detecting thin water level variations with high resolution, to the thickness as small as 0.06 cm. Compared with conventional straight TDR probe, the spiral TDR probe has 8 times the resolution in detecting the water level changes. It also achieved 3 times the sensitivity of straight TDR probe.

• 한국가스학회지
• /
• 제23권4호
• /
• pp.65-73
• /
• 2019

스파이럴 강관은 기존 UOE 강관에 비해 경제적이며 연속적으로 강관 제작이 가능해 수송관뿐만 아니라 구조부재로 사용이 점차 확장되고 있다. 최근 제작기술의 발달로 스파이럴 강관의 고강도 및 대형화가 가능하게 됨에 따라 대규모 장거리 수송용 파이프라인에도 적용이 시도되고 있고, 이로 인해 스파이럴 강관의 구조적 건전성과 경제성 확보를 위한 변형률 기반 설계가 요구된다. 그러나 이를 뒷받침하기 위한 스파이럴 강관의 설계 기준 전반이 제시되지 않은 실정이고, 구조적 거동에 대한 명확한 규명이 이뤄지지 못하고 있다. 본 논문은 스파이럴 파이프의 조관 과정에서 발생되는 잔류응력이 스파이럴 파이프의 휨 거동에 미치는 영향을 분석하였다. 조관으로 인한 잔류응력 평가를 위해 조관 성형각, 두께, 강도를 달리하여 스파이럴 파이프의 유한요소해석을 수행하고, 해석결과를 파이프 휨 해석에 대한 초기 조건으로 반영하여 수치해석적으로 휨 거동 변화를 조사하였다.

• 패션비즈니스
• /
• 제6권2호
• /
• pp.53-66
• /
• 2002

The spiral form, which comes from the organic form of natural phenomenon such as growth of creatures, has been used as a factor of formative shape in various fields of art until now. In conjunction herewith, this study intends to discover and express the life force and the formative beauty of natural substances with the organic spiral forms into clothing design, using various creating methods and materials such as Korean traditional paper. The natural substances with the spiral structure, such as seashells, land snails, passion flower, curled flower, growing chart of plants, Impatiens textori was used as subjects of the designs. The seven pieces of work were completed with attempts to develop aesthetic forms through the presentation techniques and methods via restructuring process of simplification, partial transformation and consolidation. Through such process the conclusion of this study is as follows: First, the nature, with unlimited possibilities, could be subject of human formative activities, leading to the creative world of formative art for designers. Second, adaptation of the spiral organic forms of nature into the contemporary clothing designs proved the motif as a source of inspiration of diverse subject, in recognition with its innate formative beauty as well as external shape. Third, design expressions via restructuring process of simplification, partial transformation and consolidation with designer's subjective point of view were adequate for the creations of contemporary fashion designs. Fourth, the Korean traditional paper, as a fine material for various shape according to the handling method, could be used appropriately in the contemporary clothing designs, expressing our aesthetic senses. Fifth and finally, expansion of the realm of formative expression of clothing through the development of possibilities of expression in contemporary clothing would enhance the creative possibilities of clothing design as formative art. In conclusion, the expression of clothing design as formative art was developed on the emphasis of re-creation of natural objects of the organic spiral form. For the future study, the applications of spiral form into everyday clothing designs, consolidating artistic senses and practical senses, are expected as opportunity of proposing developmental possibilities of the contemporary clothing designs.

• Tribology and Lubricants
• /
• 제18권3호
• /
• pp.181-186
• /
• 2002

A numerical analysis is undertaken to show the influence of bearing design parameters on the load capacity of air lubricated spiral grooved thrust bearing. The governing equation derived from the mass balance is solved by the finite difference method. Optimal values for various design parameters are obtained to maximize the load capacity. The design parameters are the groove angle, the groove width ratio, the groove height ratio, and the seal ratio.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.68-76
• /
• 2004

Applying a general Galerkin FE lubrication analysis method to spiral groove dry gas seals, this study intends to analyze in detail the effects of groove design parameters, such as a spiral angle, groove width ratio, groove radius ratio, groove depth ratio, and groove taper ratio, on the lubrication performances of an opening force, leakage, axial stiffness and damping, and angular stiffness and damping at low and high rotating speeds: 3,600 and 15,000 nm. Results show that, for the primary design consideration performances such as the opening force and axial and angular stiffnesses, a spiral angle of $25^{\circ}$, a groove width ratio of 0.46, a groove radius ratio of 1.1, a groove depth ratio of 1.0, and a groove taper ratio of 0.0 are preferred. Where the recommended relatively low values of groove depth and taper ratios are to keep the axial and angular dampings positive or higher than 0 particularly at the high rotating speed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.645-648
• /
• 1998

We used a three-dimensional inductance extraction program, Fasthenry for optimal design of the spiral inductors on silicon substrate. The inductance and quality factor of the spiral inductors with various design parameters were calculated so that the optimal parameter value was determined. The spiral inductors then were fabricated using different foundary processes and were measured using the network analyzer and microwave probes. The pad and other parasitics of measurement system were de-embedded using the y-parameter calibration technique. the inductors fabricated using the LG 0.8um process and HP 0.5um process showed the quality factor of 5.8 and 3, respectively. Finally the equivalent circuit farameters of the spiral inductors on silicon substrate were extracted from the measurement data using the matlab.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.260-264
• /
• 2003

It is possible to design the high performance, integration and low cost radio frequency components by using LTCC(Low Temperature Cofired Ceramic) technology. But there is a critical point to design the spiral inductor because of crosstalk effects. of the crosstalk effect of the spiral inductor are investigated using full-wave analysis of the FEM(Finite Element Method) in this paper. The results show that input power of the spiral inductor are coupled from 0.1% to 10% above 3GHz. Therefore, we should consider the crosstalk effects when we design the LTCC.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2010년도 춘계학술대회
• /
• pp.171-175
• /
• 2010