• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권2호
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• 항공우주시스템공학회지
• /
• 제12권4호
• /
• pp.35-48
• /
• 2018

일반적으로 우주인증은 높은 수준의 스크리닝을 수행하여 소자, 재료 및 제작공정, 부품, 서브시스템 또는 시스템 설계에 대한 마진을 확인한다. 기존의 미국 군, 미 항공우주국(NASA) 그리고 유럽우주기구(ESA) 시험표준서의 우주인증은 보수적 요구조건에 기인해 일정과 비용 측면에서 과도한 경우가 많다. 따라서 국내위성 개발을 위해 독자적인 비용 및 일정 최적화된 우주인증지침서가 필요하다. 본 논문에서는 이러한 우주인증 가이드라인 개발을 위한 기초 연구로서 해외 군 및 우주기구 시험표준서의 우주인증 항목을 비교 분석하였다. 이를 통해 테일러링(tailoring)된 독자적 우주인증 가이드라인을 구축하기 위한 데이터베이스로 사용하고자 한다.

• 한국환경과학회지
• /
• 제32권1호
• /
• pp.11-24
• /
• 2023

This study aimed to provide preliminary data for the improvement of the tree doctor qualification test (first written test), which was newly created by enforcing the Forest Protection Act on June 28, 2018., The high demand for system improvement accelerated this study. The results were analyzeds through literature and questionnaire surveys. Writing test questions and the license of the tree doctor qualification exam are currently managed by the Korea Forestry Research Institute, and it is deemed that the test should be entrusted to Human Resources Development Service of Korea for fair and transparent management. Additionally, the plan for the improvement of the subject-wise scope of examination questions writing, difficulty of test questions, and acceptance rate of the first test should be prepared after public hearings or seminars related to the examination questions.

• 항공우주기술
• /
• 제8권2호
• /
• pp.54-60
• /
• 2009

항공기 유압펌프의 인증시험 항목 및 절차에 대하여 조사하였다. 항공기용 유압펌프는 설계 최적화를 통한 중량 최소화와 인증시험 절차가 매우 중요하다. 본 연구는 통상의 항공용 유압펌프의 기초 성능자료를 가정하고, 이를 토대로 인증시험을 실시할 경우 중요 인증시험의 절차를 제시하였다.

• 한국의료질향상학회지
• /
• 제21권1호
• /
• pp.12-31
• /
• 2015

Objectives : The purpose of this study was to develop the qualification system for training of Quality improvement professionals who work for improving patients' safety and healthcare quality. Methods : Based on the various laws and regulations, and the operational status of other professionals' qualification systems, a basic plan of professional qualification system of QI was drawn. And through meetings with QI experts, the final scheme of the concrete qualification system was developed. Results : For management of professionals's certification or qualification, fairness and reliability are important. To do this, setting the official standard, providing a standardized training program and having appropriate qualification test are required. In order to operate the qualification system strategically, 1) the introduction step, 2) dissemination and expansion step, and 3) fusing step should be considered. As a governing body for QI specialists' qualification, 'QI professionals' qualification Center (tentative)' must have the committee to assure fairness, professionalism, and reliability. In addition, 'QI Experts Certification Department (tentative)" to develop standards for the qualification tests and conduct the tests program,' QI experts Education Department (tentative name)" must be able to operate and maintain the QI training for professional qualifications. QI professional qualification exam must be taken by everyone regardless of age, gender, race, occupation, education, and work experience. The examination should include management, leadership, strategic planning and design, quality management, health care information, patient safety culture. Practical training courses can have three step programs; beginning, intermediate and special level. Conclusion : The QI qualification system need strategic approaches for the experts working for healthcare quality improvement and patient safety. It should include the program of standardized contents and test, and operating protocol of the qualificaton system.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.782-787
• /
• 2023

KASS (korea augmentation satellite system) 시스템 통합 및 검증(IVQ; integration, verification, qualification) 활동은 시스템 및 하위시스템 요구사항 검증 활동으로 IART(inspection, analysis, review of design, test) 기반으로 상세설계 (CDR; critical design review) 이후 하위시스템 공장수락시험 (FAT; factory acceptance test)부터 현장수락시험 (SAT; site acceptance test) 그리고 시스템 통합 검증 시험 (TRR; test readiness review) 까지 수행하였다. FAT 단계의 활동은 개발된 장비를 테스트 플랫폼에 설치하고 각 장비별 인터페이스 검증과 통합운영국(KCS; kass control station)과의 연동시험을 통해 성능을 검증하였다. SAT 단계의 활동은 FAT 단계에서 검증된 KRS (kass reference station), KPS (kass processing station), KUS (kass uplink station), KCS를 운영 현장에 설치하고 검증하는 단계이며 개발 일정 및 여건을 고려하여 3단계로 구분하여 수행하였다. TRR 단계의 활동은 항공위성1호기에서 방송되는 SBAS (satellite based augmentation system) 메시지를 이용하여 SAT을 통해 검증된 장비를 FAT 단계에 수행했던 시험 항목과 추가 시험 항목 검증을 통해 전체 시스템에 대한 성능 검증을 완료하였다.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.858-865
• /
• 2006

SMART Pilot is a multipurpose small capacity integral type reactor. Main coolant pump (MCP) of SMART Pilot is a canned-motor-type axial pump to circulate the primary coolant between nuclear fuel and steam generator in the primary system. The reactor is designed to operate under condition of $310^{\circ}C$ and 14.7MPa. Thus MCP has to be tested under same operating condition as reactor design condition to verify its performance and safety. In present wort a test apparatus to simulate real operating situations of the reactor has been designed and constructed to test MCP. And then functional tests, performance tests, and endurance tests have been carried out upon a prototype MCP. Canned motor characteristics, homologous head/torque curves, coast-down curves, NPSH curves and lift-time performance variations were obtained from the qualification test as well as hydraulic performance characteristics of MCP.

• 한국항공운항학회지
• /
• 제20권2호
• /
• pp.7-12
• /
• 2012

A landing gear absorbs the impact energy during the touchdown and it generally consists of an oleo-pneumatic shock absorber and structural components. It should be designed not only to satisfy the static and fatigue strength requirements but to have the sufficient shock absorbing efficiency. The design loads and shock absorbing performance are to be validated by tests, which is required by MIL Spec and FAR, etc. This paper presents the development procedures from the design requirements to the qualification tests and technical points to be considered, with examples of the helicopter landing gear development.

• 한국항공우주학회지
• /
• 제35권4호
• /
• pp.353-362
• /
• 2007

대형위성과 달리 나노위성이나 마이크로위성과 같은 소형위성의 경우, 전장품을 장착하기 위한 위성 내부 공간은 극히 제한되어 있다. 이러한 문제를 완화하기 위해 나노위성 HAUSAT-2는 대부분의 서브시스템과 탑재체의 전장모듈들을 통합한 일체형 위성 버스전장박스(BEU; Bus Electronic Unit)를 개발하였다. 본 논문에서는 개발된 BEU의 설계, 환경시험 결과 및 성능 분석에 대해 기술하였다. 진동 및 열진공 시험은 새로 개발된 BEU의 설계 여유 검증을 위해 인증(qualification) 수준으로 수행하였다. 인증시험 전후의 성능시험을 통해 각 서브모듈들이 정상적으로 작동하는 것을 확인하였다. 진동시험 결과 BEU는 구조적인 손상 없이 설계 강성조건을 만족하는 것을 검증하였으며, 열해석 모델링의 보정을 통해 열진공시험과 거의 일치하는 결과를 얻게 되었다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.213-218
• /
• 2003

Because of the development of digital technology, modern digital instrumentation & control systems are being innovativly developed in industrial plants. Whereas, many analog systems are still being used in nuclear plants, because of the demerits of digital equipment. As known, the demerits of digital equipment are the uncertainty and weaknesses in ambient environments such as smoke & electromagnetic interference In an Integral Reactor, a digital I&C system will be composed of microprocessor, memory and network card. Designers will apply new technique for digital equipment. Thus, it is important for digital I&C systems to operate according to designed functions & performance in the ambient environments during a life cycle. Digital I&C systems should have tolerance in such environments and environment qualification should be concluded To acquire electromagnetic interference qualification of digital equipment, this paper suggests an EMI test requirement. Designers should consider the electromagnetic compatibility and test digital equipment according to each test procedure. This paper involves an EMI test requirement and the results analysis of EUT(Equipment Under Test). Test result analysis will be used as electromagnetic compatibility design guides for Integral Reactor I&C systems.