• The Research Journal of the Costume Culture
• /
• v.26 no.4
• /
• pp.503-518
• /
• 2018

The purpose of this study is to illustrate the design of safety suits based on energy-harvesting technology, particularly targeting street cleaners who must work at night with high mobility. The design focuses on applying lightweight energy-harvesting tools and illuminant into the wear. The design development reflects feedback from testers collected via survey constituting a key methodology. The development process has two main stages. Each stage uses a process of design prototyping, internal examination, test sampling, test wearing, and wearers' feedback via survey that consists of questions on visibility, wearing convenience, and washability. The first stage results show the design of safety suits with energy-harvested LED illuminant inserted and the survey results collected from street cleaners dressed in 4 sample and 80 actual suits in total. Improved based on the first-stage survey results, the second stage designs the suits with detachable energy-harvested EL tape. From these 5 sample and 30 actual second-stage suits, the additional survey indicates that this second-stage design facilitates more visibility and convenience in washing and wearing than the first-stage design. Accordingly, one can expect that this new design can apply not only to safety suits for night workers but also to handicapped or outdoor sportswear applications in the future.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.777-788
• /
• 2010

Early diagnosis of autism and intervention of medical treatment are very significant to develop specific social communication skill for children with autistic spectrum disorders (ASDs). But they have difficulties in medical treatment because of lack of a public welfare institution and special medical system. In particular, few children can access such treatment and the existing single-therapist clinics are inefficient with regard to cost and time. Therefore, new methods should be studied for developing various products, services, and systems for autistic children. This study discusses the potential use of an interactive design as assistive technology for such children. We utilize the experience gained in the collaborative design of the interactive therapy system (ITS). The key methods include a collaborative design with rapid interactive prototyping, heuristic evaluation, user-centered process, VR technology, tangible interface, and scenario-based contents. We applied these methods to the ITS and proved the efficiency of interactive design as an assistive technology through clinical experimentation.

• Journal of Power System Engineering
• /
• v.12 no.2
• /
• pp.29-34
• /
• 2008

Bellows is widely used in many industrial fields as it provides a relatively simple means of absorbing mechanical shock, vibration and thermal deformation with flexibility. In this study, the inherent dynamic characteristics of curved bellows are numerically studied according to the variation of angle, curvature and crest density, etc. For these numerical studies, a parametric finite element modelling program of curved bellows is constructed using ANSYS APDL. The validity of numerical results obtained from ANSYS software is experimentally verified using the test model made by RP machine SLA 5000.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.345-348
• /
• 2001

Nowadays, cast ingots has been used as preforms for forging to reduce the cost and the number of processes. In this study, the forging ability of Al cast alloys was investigated by using hot compression tests. Hot compression behavior of the cast Al alloys has been studied The flow stress increased by decreasing the compression temperature and by increasing the strain rate. In case of melt treatment the flow stress decreased comparing to untreated A356.0 Al alloy. Also, We developed the various forged lower control arm using the cast preform. The optimum design of product and cast preform was investigated After Prototyping of Al forged lower arm, durability and buckling test were performed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.195-202
• /
• 2002

By using modeling and simulation. today's design engineers are simultaneously reducing time to market and decreasing the cost of development, while increasing the quality and reliability of their products. A driving simulator is the best example of this method and allows virtual designs of control systems, electronic systems, mechanical systems and hydraulic system of a vehicle to be evaluated before costly prototyping. The objective of this Paper is to develop the virtual Proving: ground using a driving simulator and to show its capabilities of an automotive system development tool. For this purpose, including a real-time vehicle dynamics analysis system, the PC-based driving simulator and the virtual proving ground are developed by using VR(Virtual Reality) techniques. Also ABS HIL(Hardware-In-the-Loop ) simulation is performed successfully.

• 한국정보교육학회:학술대회논문집
• /
• 2010.08a
• /
• pp.95-99
• /
• 2010

In this study, using the program in elementary school, scratch, based on user-centered design model, a high-level (High Level) step by applying prototyping techniques for application development, training and present a model applied to investigate reports that validate the effectiveness. The results of this study, problem solving and logical thinking ability in elementary school for the education of the new approach to application development is expected to be.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1932-1940
• /
• 2000

We must solve problems caused by mobile computing environments for supporting efficient mobile computing services. The problem is the use of wireless medium having high error rates and low bandwidth, and the sudden network disconnection to reduce the power consumption of a mobile host and the cost of the network connection. For these problems, we proposed the architecture of the partial connection manager and designed and implemented that in this paper. In particular, The partial connection manager creates the limited number of mobile agents according to priority and sends them in parallel to server systems and combines results of them process rapidly the user request. By applying the proposed partial connection manager to the mobile computing services called cybermarket, we knew that the mobile agent technique could be suited to the mobile computing environment and overcome the partial connection problem caused by eh mobile computing environment.

• IE interfaces
• /
• v.11 no.3
• /
• pp.219-225
• /
• 1998

Presented in this paper is a state-of-the-art review of VM(Virtual Manufacturing). To survive on a global competition, manufacturers must shorten the time to market for their products. To achieve this goal, many manufacturers have implmented CIM systems. VM is a new direction in the CIM system development having emphasis on enhancing the decision-making capability. VM can be defined an integrated, synthetic manufacturing environment exercised to enhance all levels of decision and control. Also, VM is the use of computer models and simulations of manufacturing processes to aid in the design and production of manufactured products. Currently, VP(Virtual Prototyping) and VF(Virtual Factory) are main theme to develop a VM. In this paper, the concept and current status of VP and VF are explained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.405-409
• /
• 1997

Voronoi diagrams are applied in varios field such as NC toolpath generation, VLSI design and robot path planning because of their geometric charcteristics. In this paper, Voronoi diagrams are introduced on polygon constructed by line segments only and with constant offset. Bisector curves for two arbitrary objects, which is the combination of line segment and arc, are defined as parametric fuction where the parameter is used as offset. Offset curves are applied on the generation of laser scanning path for the stereolithography and shows a good result from several examples.

• Journal of the KSME
• /
• v.35 no.8
• /
• pp.716-724
• /
• 1995

토폴로지 설계는 미리 형상이 결정되지 않은 새로운 개념의 제품을 설계하고자 할 때나 설계 경험이 풍부하지 못한 경우, 그 개념적 형상을 결정하는 데 매우 유용하다. 실제로 이러한 토폴 로지 설계의 결과를 최근 급속 시제품 제작기(rapid prototyping machine)와 함께 사용하게 되면 처음 개념설계에서 최초시제품의 형상을 예측하고 제작하는 데 많은 시간을 절약할 것으로 판 단된다. 그러나 토폴로지 최적화에 따른 구조물은 구조물의 한계 질량내에서 평균 강성이 가장 큰 구조물일 뿐, 국부적인 응력한계에 대한 최적화는 아니다. 따라서 최종적인 최적화 형상을 얻기 위해서는, 먼저 한계질량을 갖는 최적 토폴로지 구조물의 모델을 구하고, 이 모델에 대하여 설계변수에 따른 민감도 해석을 수행하여 최대응력의 한계값을 갖는 구조를 구하면 된다. 그림 10은 이러한 토폴로지 최적화와 민감도 해석을 통한 최적화를 수행하는 복합 최적설계 과정에 흐름도이다. 설계민감도 해석은 본 연구의 범위에 포함되지 않아서 여기서는 제외하였지만, 이에 관한 일반 상업화된 소프트웨어들이 많이 나와 있으므로 이를 참조하면 된다.