• 한국BIM학회 논문집
• /
• 제10권4호
• /
• pp.1-10
• /
• 2020

While the importance of barrier-free and fire evacuation design is highlighted in architectural design education, systemic analysis, and examination on such performances are still challenging due to methodological lacks. The present study investigates the effectiveness of BIM-based human behavior simulation for architecture major students' analytical examinations to promote barrier-free and fire evacuation performances. To achieve such an aim, quasi-experiments were conducted, which compare 50 students' analysis and examination scores according to the use and non-use of the simulation, and the data were collected via participants' survey and interview. As a result, T-Test and MANOVA analyses indicate that, compared with its non-use counterpart, the use of human behavior simulation better facilitates the students' (1) examination of the physical properties and dimensions for the disabled's accessibility and evacuation, (2) understanding of the bodily capacity and handicap of the disabled, (3) examination on the spatial layouts and locations of exits, (4) understanding on evacuees' urgent behaviors, and (5) responsibility as an architect. Based on previous studies, the reasons of statistical results are interpreted as the explicit observation and analytical measures of multiple numbers of virtual-evacuees and direct-experience from body range of the disabled responding to the populated occupants as what they face in authentic reality.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.514-521
• /
• 2007

There has been considerable interest recently in the topic of renewable energy. This is primarily due to concerns about environmental impacts. Moreover, fluctuating and rising oil prices, increases in demand, supply uncertainties and other factors have led to increased calls for alternative energy sources. Small hydropower, especially using water supply system, attracts high attentions because of relatively lower cost and smaller space requirements to construct the plant. Moreover. newly developed positive displacement turbine has high acceptability for the system. Therefore, the purpose of this study is focused on the examination of the performance characteristics and proposition of a optimum design method of the turbine for the improvement of the performance. The results show that newly proposed optimum design method for the turbine has high accuracy of performance prediction and good applicability for the performance improvement of the turbine.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.99-111
• /
• 2010

Recently, a very large vessel's maneuvering performance, rudder performance and rudder design's importance is considered to be an important subject. There have been few studies on the design process of rudder device before. The aim of this paper is to investigate a design process of rudder device and to propose a generalized design process of rudder device. Firstly, we investigated the rudder device design process of Korean major shipyards. And the differences of a torque calculation method, rudder section design, maneuvering performance examination method, etc were analyzed theoretically. Secondly, the design process of rudder device was divided into concept design, initial design and detail design. In concept design, a rudder area was estimated and its validity was examined. In initial design, rudder profile and design method has been selected through rudder form determination process. And principal dimension and steering gear capacity were determined. Maneuvering performance was also examined by simulation tool. In detail design, design criteria considered in rudder initial design has been investigated thoroughly. Also a rudder torque, rudder cavitation performance and rudder structure analysis were estimated. And maneuvering performance was also examined by model test. Finally, based on the results of investigation, the design process of rudder device was generalized and proposed.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.44-50
• /
• 2014

There were many flaw issues of reactor vessel head penetration in USA fleets. USNRC issued 10CFR50.55a to implement reactor vessel head penetration ultrasonic examination performance demonstration(PD) in US for enhancement of inspection reliability. After September 2009, all US utilities inspected their RVHP with PD qualified system. Korea Hydro and Nuclear Power Company(KHNP) have developed reactor vessel head penetration performance demonstration system for ultrasonic test to apply for pressurized light-water reactor power plants in accordance with 10CFR50.55a since September 2011. RVHP configuration surveying and analysis, code requirement analysis, and performance demonstration specimen design were performed up to this day. Fingerprinting of manufactured specimen, development of test data management program, development of operation procedure, input of flawed data, and development of final report will be performed for the next step. This paper describes the development status of the performance demonstration system for reactor vessel head penetration ultrasonic examination in Korea.

• Earthquakes and Structures
• /
• 제24권1호
• /
• pp.11-20
• /
• 2023

"Performance-based design (PBD)" is based on designing a structure with choosing a performance target under design criteria to increase the structure's resistance against earthquake effect. The plastic hinge formation is determined as one of the fundamental data in finite elements nonlinear analysis to distinguish the condition of the structure where more significant potential damage could occur. If the number of plastic hinges in the structure is increased, the total horizontal load capability of the structure is increased, also. Theoretically, when the number of plastic hinges of the plane frame structure reaches "the degree of hyperstaticity plus one", the structure will reach the capability of the largest ultimate horizontal load. As the number of plastic hinges to be formed in the structure increases towards the theoretical plastic hinge number (TPHN), the total horizontal load capability of the structure increases, proportionally. In the previous studies of the authors, the features of examining the new performance criteria were revealed and it was formulated as follows "Increase the total number of plastic hinges to be formed in the structure to the number of theoretical plastic hinges as much as possible and keep the structure below its targeted performance with related codes". With this new performance criterion, it has been shown that the total lateral load capability of the building is higher than the total lateral load capability obtained with the traditional PBD method by the FEMA 440 and FEMA 356 design guides. In this study, PBD analysis results of structures with frame carrier systems are presented in the light of the Turkey Building Earthquake Code 2019. As a result of this study, it has been shown that the load capability of the structure in the examples of structures with frame carrier system increases by using this new performance criterion presented, compared to the results of the examination with the traditional PBD method in TBEC 2019.

• 비파괴검사학회지
• /
• 제5권1호
• /
• pp.34-47
• /
• 1985

The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.

• 소성∙가공
• /
• 제16권3호
• /
• pp.201-209
• /
• 2007

Generally, the forming process of suspension system parts have been considered only considered with the formability and have not been considered with the durability of suspension system. But the durability of suspension system is very important characteristic for the dynamic performance of vehicle. Therefore, the suspension system should be manufactured to consider the durability as well as the formability. This paper is about an optimum forming process design with the effect of section properties to consider the roll durability of torsion beam type suspension. In order to determine the tube hydroforming process for the satisfaction the roll durability, the stamping and hydroforming simulation by finite element method were performed. And the results from finite element analysis and roll durability examination showed the tube hydroforming process of torsion beam is optimized as satisfying the durability performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권2호
• /
• pp.170-177
• /
• 2013

본 연구는 200 W급 자이로밀형 소형 수직축 풍력터빈 로터 블레이드의 형상설계 및 유동해석에 의한 성능 검토에 관한 내용을 정리한 것이다. 2차원 형상의 로터 블레이드에 대하여 단일유관이론을 적용하여 설계하였으며, 설계 결과에 대해서 2차원 수치유동해석을 수행하여 해석결과의 검토로부터 3차원 로터 블레이드 기본 형상을 결정하고, 3차원 수치유동해석을 통하여 풍력터빈 로터 블레이드의 형상 결정 및 성능 검토를 하였다. 본 연구의 결과로부터 상대적 저풍속에서 200 W급 자이로밀형 수직축 풍력터빈 로터 블레이드의 형상을 도출하였고, 수치유동해석으로부터 정격출력 200 W를 확보할 수 있음을 확인하여, 본 연구에서 적용한 설계법의 타당성을 확보하였다.

• 한국멀티미디어학회논문지
• /
• 제16권2호
• /
• pp.226-233
• /
• 2013

엘리베이터의 자체점검과 정기검사, 완성검사, 정밀안전검사 등은 엘리베이터 운행을 위한 중요 검사로써 엘리베이터의 성능 및 안정성을 평가하는 기초 자료다. 자체점검 및 안전검사항목에 엘리베이터의 진동에 관한 사항에 대해서는 특별히 명시되어 있지 않으나 진동은 여러 가지 분석 자료를 제공해 줄 수 있는 필수요소로 되어있다. 엘리베이터의 진동을 측정하기 위한 "EVA-625"라는 장비는 컴퓨터로 데이터를 읽어 숙련된 엔지니어에 의해 측정된 값을 분석할 수 있다. 본 논문에서는 3축 가속도 센서를 이용하여 엘리베이터의 진동을 측정하여 데이터를 송신 받을 수 있는 하드웨어와 시스템 설계 플랫폼 및 개발환경인 LabVIEW의 G 그래픽 프로그래밍 언어를 이용하여 수집되는 데이터를 분석할 수 있는 소프트웨어를 설계하고 구현하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.223-225
• /
• 2007

The contact-less inductive power transformer (IPT) uses principle of electromagnetic induction. Generally, there were many methods to improve the transfer performance of traditional transformer. But, though the principle of IPT is similar to that of general transformer, it is impossible to apply the methods because of large air-gap. Consequently, many linear numerical formulas for analysis of performance and design of traditional transformer cannot be used in development of IPT. The concept of the IPT for vehicle like PRT(Personal Rapid Transit) system is suggested and some suggestions for power collector(core & winding) design of IPT to improve power transfer performance arc presented in this paper. The characteristic of power delivery with these novel methods in design is presented by simulation and examination.