• 대한치과교정학회지
• /
• 제41권1호
• /
• pp.25-35
• /
• 2011

교정용 마이크로 임플란트는 나사산을 매개수단으로 한 인접골 압박으로 골내 고정력을 얻는다. 그러므로 충분한 고정력을 얻기 위해서는 나사산이 크면 유리하다. 그러나 몸체에서 차지하는 나사산의 부피비율이 과도하면 이는 코어(core) 직경을 감소시켜 파절위험성을 증대시킬 뿐 아니라, 식립 시 나사산이 골을 지나치게 압박, 인접골에 골개형 장애를 일으켜 임플란트를 이완시키는 원인이 될 수도 있다. 따라서 마이크로 임플란트의 안정성은 그 나사산 디자인이 치밀골 특성과 조화를 이루어야 한다. 본 연구에서는 $Absoanchor^{(R)}$ SH1312-7 (Dentos Inc., Daegu, Korea) 모델을 비교모델로 선택, 몸체와 나사산 사이즈의 조화를 이루기 위한 최적화 해석을 실행하였다. 나사산의 높이(h)와 피치(p)를 디자인 변수로 하여 임플란트 안정성 증대, 식립 시 골 과부하 감소, 파절강도 증대를 목표로 목적함수 SQ(Stability Quotient)를 설정, 해석함으로써 4가지의 다른 h, p 조합을 갖는 나사산을 디자인하였다. 4종의 실험모델과 비교모델에 대해 3D 유한요소법을 이용한 임플란트 식립모사 해석으로, 식립 시 예상되는 골 과부하 영역을 비교하였으며(self tapping과 self drilling의 두 식립 방식에 대해), 또한 실험모델의 실물(prototype)을 가공, 토오크 파절 시험을 실시하였다. 평가결과, 실험모델은 비교모델에 비해 식립 시 인접골 과부하 영역을 덜 발생시켰으며, 파절강도는 더 높게 관찰되었으며, 이로써 나사산 디자인 최적화에 사용된 SQ의 타당성을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.96-102
• /
• 2008

In order to design establish automation or optimization of the machining process, predictions of the forces in machining are often needed. In this paper, a theoretical model in face milling is presented based on Oxley's predictive machining theory, where the cutting forces are predicted from input data of fundamental work material properties, tool geometry and cutting conditions without any preliminary cutting experiment. A simulation system for the cutting forces in face milling is developed using the model. Milling experimental tests are conducted to verify the model and the predictive results are compared and discussed with the experimental results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.195-204
• /
• 2000

The finite element analysis (FEA) is widely used in modern structural dynamics because the performance of structure can be predicted in early stage. However, due to the difficulty in determination of various uncertain parameters, it is not easy to obtain a reliable finite element model. To overcome these difficulties, a updating program of FE model is developed by consisting of pretest, correlation and update. In correlation, it calculates modal assurance criteria, cross orthogonality, mixed orthogonality and coordinate modal assurance criteria. For the model updating, the continuum sensitivity analysis and design optimization tool(DOT) are used. The SENSUP program is developed for model updating giving physical parameter sensitivity. The developed program is applied to practical examples such as the BLDC spindle motor of HDD, and upper housing of induction motor. And the sensor placement for the square plate is compared using several methods.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.602-607
• /
• 2008

A technique for reliability-based design optimization(RBDO) is developed based on the Bayesian approach, which can deal with the epistemic uncertainty arising due to the limited number of data. Until recently, the conventional RBDO was implemented mostly by assuming the uncertainty as aleatory which means the statistical properties are completely known. In practice, however, this is not the case due to the insufficient data for estimating the statistical information, which makes the existing RBDO methods less useful. In this study, a Bayesian reliability is introduced to take account of the epistemic uncertainty, which is defined as the lower confidence bound of the probability distribution of the original reliability. In this case, the Bayesian reliability requires double loop of the conventional reliability analyses, which can be computationally expensive. Kriging based dimension reduction method(KDRM), which is a new efficient tool for the reliability analysis, is employed to this end. The proposed method is illustrated using a couple of numerical examples.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.292-297
• /
• 1997

The rattle noise is the most significant in many kinds of manual gearbox noises, which is generated at the idle stage of the engine operation. The main torsional vibration source of the driveline is the fluctuation of the engine torque. The gear rattle is impacts generating in the backlash of the free gear due to this torsional vibration. Many researchers reported the clutch torsional characteristic optimization method to reduce the idle gear rattle but only few of them give sufficient consideration to the system parameters like gear backlash, drag torque, system inertia, inertia distribution, engine torque fluctuation, idle engine rotation speed, and accessory load. This paper pays attention to the gear impact mechanism and system design parameters to reduce the idle gear rattle with computer simulation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.3-8
• /
• 2004

When most manufacturing company produce grinding product operators decide grinding condition by experience and subjective judgment. The study on grinding manufacture have been developed to get the grinding condition with the same result when non-experienced or experienced worker work. The objective of this study is to develope the grinding condition and predict the result of grinding by neural network. Several discussions were made in following areas as; getting MRR with image processing, the architecture optimization of neural network with experiment design, analysis of the input neurons using sensitivity approach. The results showed that the developed approach was the best method in predicting grinding condition with respect to surface finish quality.

• 한국화재소방학회논문지
• /
• 제14권2호
• /
• pp.14-20
• /
• 2000

건물화재시에 연기에 의한 피난자의 위험을 감소시키고 소방대의 구조활동을 원활히 하기 위하여 건물 외부의 공기를 이용, 건물내부의 일부를 가압하는 가압방연시스템이 이용되고 있다. 본 연구에서는 건물의 가압방연시스템을 설계하기 위하여 건물의 각 요소, 방, 로비, 계단실, 급기샤프트 등을 연결하는 유로를 구성하여 각 요소에서의 압력손실과 유량을 계산할 수 있는 컴퓨터 프로그램을 개발하였다. 본 프로그램을 이용하여 가압용 송풍기의 적절한 용량선정과 송풍기의 용량 최적화를 위한 방안을 강구하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.250-254
• /
• 2001

The resolution of analog sensor is determined by its sensitivity and amplitude of noise. This paper presents modeling of inductive gap sensor base on equivalent magnetic circuit and analysis of sensitivity. We can simulate static characteristic of inductive gap sensor using this model. Computer simulation show that sensor's sensitivity is affected by magnetic flux's leakage and fringing, and that they are affected by shape of sensor probe. Base on this, we designed shape of inductive position sensor probe.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.68-74
• /
• 2001

In the drawing of large size automotive panels, elastic deflection of die components is induced by the contact force between them. The deflection is nonuniform and locally distributed, and results in nonuniform material flow. In order to arrange such a nonuniform die gap, a correcting operation, so called die spotting, is inevitable, which requires trial and error works and consuming time. A prediction of the bending deflection prior to a try-out must be useful to reduce the die spotting time. In this study, drawing process of a front fender is simulated first. and the deflection of the blank holder is calculated from the contact force imposing on th blank holder. The balance block heights ensuring a uniform deflection are optimized by the analysis and design of experiments.

• Structural Engineering and Mechanics
• /
• 제43권3호
• /
• pp.287-309
• /
• 2012

Precast segmental bridge columns (PSBC) are alternatives for monolithic cast-in-situ concrete columns in bridge substructures, with fast construction speed and structural durability. The analytical tool for common use is demonstrated applicable for seismic performance prediction of PSBCs through experiment conducted earlier. Then the analytical program was used for parameter optimization of PSBC configurations under reversal cyclic loading. Shear strength by pushover analysis was compared with theoretical prediction. Moreover, seismic response of PSBC with energy dissipation (ED) bars was compared with its no ED bar counterpart under three history ground acceleration records. The investigation shows that appropriate ED bar and post-tensioned tendon arrangement is important for higher lateral bearing capacity and good ductility performance of PSBCs.