• Journal of agricultural medicine and community health
• /
• v.29 no.2
• /
• pp.287-301
• /
• 2004

Objectives: The development of internet programs for smoking cessation was motivated to quit smoking in the large group of smokers. This personalized program consisted of tailored message to consider the smokers characteristics, and contain the informations on the outcomes of smoking cessation and the skills to be used in the quit attempts. The purpose of this study was to develop the internet management program and information push-delivery system for smoking cessation to encourage the personal intention to quit smoking. Methods: We conducted in 3 steps as developing push service to encourage intention of smoking cessation, analyzing problems of smoking cessation program through the pilot test and suggesting improvements by implication stages. Results: This program is delivered for 30 days. if the participants do not fail to quit smoking. The contents consisted of 13 stages which were divided on starting period. practical period, maintenance period and success period. And push service afforded the tailored message to participants using their e-mail. According to the evaluation of pilot test, the problems of internet information push-delivery service for smoking cessation were the over-tasks per visiting time, recording style of participants, difficulty of terms and sentences, lack of visual effects, absence of follow-up module and unsuitable link with main homepage. Improvements were divided on 3 stages by implication period. The first stage included the immediate improvements as improving link with homepage, modifying menu of smoking information and upload file of notice part. The second stage included the short term improvements as alleviating condition of withdrawal, coordinating start stage of retrial, modifying errors of information push-delivery service and addition of educational materials. The third stage included the long term improvements as development of follow-up module, cost-effectiveness evaluation, reducing contents quantity, introduction of checking style, compensation of graphics effect and review for SMS utilization. Conclusions: This program contribute to improving smoking cessation rate. Therefore this program should be tested in a community to evaluate the effectiveness. To promote the effectiveness, this program should be developed the contents and the strategies for various targets, and established the follow-up system for ex-smokers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.49-57
• /
• 2008

This study was conducted to develop an optimal composite recipe for a cookie including yam powder that would be attractive to all age groups. Wheat flour was partially substituted by yam powder to reduce the content of wheat flour. This study has produced the sensory optimal composite recipe by making cookies, respectively with each 5 level of yam powder $(X_1)$, Sugar$(X_2)$, butter$(X_3)$, by C.C.D (Central Composite Design) and conducting sensory evaluation and instrumental analysis by means of RSM (Response Surface Methodology). Sensory items showed very significant values in color, softness, overall quality (p<0.01), flavor (p<0.05) and those of instrumental analysis showed significant values in lightness, redness (p<0.05), spread ratio, hardness (p<0.01). Also sensory optimal ratio of yam cookie was calculated at yam powder 37.35 g, sugar 50.75 g, butter 78.40 g and it was revealed that the factors of influencing yam cookie aptitude were in older of yam powder, butter, sugar.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.233-240
• /
• 2005

To discover new functional materials using edible plants, antioxidant activities of methanol extracts from various parts of seven wild vegetables were investigated in vitro. Total polyphenol contents, determined by Folin-Denis method, varied from 16.74 to $130.22{\mu}g/mg$. Radical-scavenging activities of methanol extracts were examined using ${\alpha},\;{\alpha}-diphenyl-{\beta}-pirrylhydrazyl$ (DPPH) radicals and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) assay. Inhibition effects on peroxidation of linoleic acid determined by ferric thiocyanate (FTC) method and on oxidative degradation of 2-deoxy-D-ribose in Fenton-type reaction system were dose-dependent. Athyrium acutipinulum Kodama (leaf and rood), Achyranthes japonica (Miq.) Nakai (seed), and Solidago virga-aurea var. gigantea Nakai (root) showed relatively high antioxidant activities in various systems.

• Journal of Genetic Medicine
• /
• v.8 no.2
• /
• pp.113-118
• /
• 2011

Purpose: Placental corticotropin-releasing hormone receptor type 1 (CRHR1) expression is reduced in pregnancies with abnormal placental function such as preeclampsia (PE), and the levels and/or function of CRHR1 are genetically influenced. The aim of this study was to investigate the association between the c.33+8199C>T polymorphism in the CRHR1 gene and PE in a Korean population. Materials and Methods: Using a case-control design, the association between the CRHR1 polymorphism and the risk of PE was investigated in 203 individuals with PE and 211 normotensive controls. Genotypes were determined using a SNapShot kit and an ABI Prism 3100 Genetic analyzer. Results: Genotypes and allele frequencies for the CRHR1 polymorphism did not differ between PE and normotensive pregnancies. The variant T allele was more frequent than the ancestral C allele in both of the groups and was more frequent in the controls than in the cases. In risk analysis for PE, there was not an increased risk of preeclampsia in subjects who were concomitant homozygous rare allele genotypes (CC) (OR, 0.3; P=0.15) or heterozygous rare allele genotypes (TC) (OR, 0.8; P=0.29). There were no differences in the complications of PE such as severity or preterm delivery in patients with the CRHR1 polymorphism. Conclusion: Our findings indicate that the CRHR1 polymorphism was not associated with PE in the present Korean study group.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.2
• /
• pp.33-40
• /
• 2014

The purpose of this study is to examine vegetation of the outer walls of the Jeongyi Town Wall in Jeju and analyze the characteristics and problems identified, for suggesting preliminary data for selecting species of plants appropriate for the greening of the walls in the southern temperate climate region, including Jeju. The result of this study is as follows. The number of plants growing naturally around the walls of the town was identified to be 52 taxa. Based on the list of naturalized plants, there are 5 taxa; Sonchus oleraceus, Houttuynia cordata, Crassocephalum crepidioides, Erigeron annuus and Lamium purpureum. The number of species by district was from 3 to 14 taxa with 7.1 taxa on average. Analyzing by the constancy class, plants in class III included Sedum bulbiferum, Trichosanthes kirilowii, Hedera rhombea and Boehmeria nivea. Manipulation of the species composition table shows that the number of plant species growing naturally around the walls of Jeongyi Town Wall is a total of 52 taxa, including 11 taxa by differential species of community and 41 taxa by companion species. The types of plants very useful for the covering of the walls are evergreen climbing vine, such as Hedera rhombea, Ficus thunbergii and Euonymus fortunei and deciduous climbing vine, such as Parthenocissus tricuspidata, Trichosanthes kirilowii and Paederia scandens. In addition, Ficus stipulata is identified as a vegetation more appropriate for the southern-ward lattice-blocked walls. Woody plants, such as Akebia quinata, Celastrus flagellaris, Ampelopsis brevipedunculata for. citrulloides, Rubus hirsutus, Clematis apiifolia and herbaceous plants, such as Dioscorea tenuipes, D. quinqueloba, D. nipponica, Cayatia japonica and Paederia scandens var. angustifolia are highly useful materials for climbing plants for covering the walls of the southern province. Pteridophyte, such as Lemmaphyllum microphyllum, Pteris multifida, Cyrtomium falcatum and Lygodium japonicumare suggested as very useful for increasing unique regional characteristics of the southern province, including Jeju.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.1
• /
• pp.146-158
• /
• 2012

This study aims to discussion the characteristics of location and spatial organization of the Seoul Sajikdan that has significance as one of national ceremonial place in Joseon Dynasty to understand its landscape architectural characteristics. To do this, we studied in two ways; review of historical documents and analysis of the present conditions and photographing, research materials about the form of physical structure. Through these ways, the results are as follows. First, in case of construction, Sajikdan took fundamental shape in Tae-jong 16 year(1416), since then it had been changed during Imjin War, reign of Suk-jong, and Japanese Colonial Era. It took present shape through restoration of Seoul Sajikdan in 1998. Second, in case of location, Sajikdan abuts onto southeastern range of Mt. Inwang that is Wubaekho(右白虎) of inner four mountain(內四山) of Hanyang, and it has a topography of west-high-east-low type. Also its territory is up to Maedong elementary school, the office of Sajik-dong, and a Dangun shrine. Third, in case of spatial organization, Sadan and Jikdan are in harmony of Yin-Yang(陰陽) and arranged in the center. As making Yumun and Sinmun(神門) at the center of four side of Yuwon and Juwon(周垣), they show organization of the Five Elements. And subsidiary buildings are thought that its arrangement was considered functional similarity and use convenience. Finally, in case of spatial component, Danyu structures are Sadan and Jikdan that hold a Sajikdaeje(社稷大祭), Yuwon that surround two altars, and Juwon that is outer fence of Yuwon. Architectures are Sajikdan Jeongmun, Sinsil, and Anhyangcheong. Also Prunus yedoensis, Zelkova serrata, Acer palmatum, are planted, but Pinus densiflora was main species and there needs to be replanted suitably to the site.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.23-36
• /
• 2010

The purpose of this study is to infer the aspects and significance of Musa basjoo of latter part of Chosun Dynasty by analyzing the planting tendency and planting location of Musa basjoos drawn in total 77 old paintings and the characteristics of the paintings where Musa basjoos appeared, while trying to understand symbolic meanings of floral languages as well as the images and significance of Musa basjoos which appeared in the prose and poetry of Chosun Dynasty, and the results are as follows; With its floral languages of 'waiting', 'parting' and 'beauty', Musa basjoo represented the wealth and resuscitation and it aroused the elegance of hermits in its Taoistic sense. And it also represented 'the unworldliness to get out of transient human affairs' in its Buddhistic sense. Musa basjoos which appeared in 'Garden Custom Painting(庭園雅集圖)', 'Gosa Figure Painting(故事人物圖)' and 'Gyehoe Painting(契會圖)' is considered a device to increase the unworldly atmosphere of gardens and to dignify the elegant meetings of scholars, reflected by the high appearance frequencies of cranes and deer. And it seems that the meaning of Musa basjoo in certain paintings like 'Life-time Paintings(平生圖)', 'Castle City Painting(盛市圖), and 'Cultivating and Weaving Painting(耕織圖)' is an aspiration for wealth and prosperity, and the Musa basjoos planted in temples are considered to have symbolic meanings of aspiration for 'Salvation through Belief' as well as a unworldly meaning which reminds the transiency of human affairs. In addition, the expected effect of experiencing 'the sound of rain falling on the leaves of Musa basjoo' has been pursued, which can be confirmed by the fact that Firmiana simlex with wide leaves similar to Musa basjoo can be frequently spotted near the houses. Meanwhile, Musa basjoos seem to have been planted mainly in front garden or side garden around detached house and Musa basjoos inside the houses seem to have been planted mainly in right side when viewed from the entrance, in relation with the location of bedrooms where it is easier to hear the sounds from the right side of the environment. And the paintings where Musa basjoos appear with strange rocks and bizarre stones among other things have greater part of all the paintings, which is considered a kind of intentional landscaping and a product of mixed materials for elegant appreciation. And the major characters of the painting were involved in the activities of scholars such as arts, and the activities of minor characters were greatly related to their everyday lives. Musa basjoo of Chosun Dynasty in $17^{th}$ and $18^{th}$ century was one of the symbols necessary for description of gardens. And it provided the images of rainy scenes together with scholar culture which had a meaning of self-discipline, and it is assumed that the planting of Musa basjoo with the spirit of cease lessen deavor of a new leaf pushing up the tree and the spirit of resuscitation had the same trace of wheels in the city space of our country as the decline of scholar culture of Chosun Dynasty.

• Journal of agriculture & life science
• /
• v.45 no.1
• /
• pp.59-66
• /
• 2011

This study was conducted to investigate the effect of vase material and floral preservative treatment over time on flower color, leaf color and flower size of cut flowers Rosa hybrida 'Aqua' and 'Corvernet', and Gerbera jamesonii 'Honeymoon' and 'Golden Time' stuck in a glass, porcelain, or onggi (pottery with a dark bronze glaze) vase containing either tap water or a floral preservative solution. The ${\Delta}E$ values in flower color of 'Aqua' rose at 8 days after treatment with a floral preservative in onggi and porcelain vases were low. The ${\Delta}E$ value of 'Covernet' rose treated with floral preservative in an onggi vase was the lowest and L value was the closest to that of petals of cut flowers at just before treatment (control). The ${\Delta}E$ value of 'Honeymoon' gerbera treated with a floral preservative in an onggi vase was the lowest and a value of 58.81 and b value of 34.29 were the closest to that of the control group as color of cut flowers in an onggi vase was similar to the color at the beginning of treatment. The ${\Delta}E$ value of 'Golden Time' gerbera treated in an onggi vase was significantly lower than that in a porcelain or glass vase and a value of -7.81 treated with a floral preservative solution in an onggi vase was the closest to the control and b value was high in an onggi vase as well. The L, a, and b values in leaf color of roses were similar to each value of the control and ${\Delta}E$ value of 3.25 measured in an onggi vase was lower than that in a porcelain or glass vase. Flower diameter of 'Covernet' and 'Golden Time' roses treated with a floral preservative in an onggi vase was greater than that in other treatments. From these results, the floral preservative applied to a holding solution is assumed to improve the quality and freshness of cut roses and gerberas by inhibiting microbes propagation and by promoting uptake of water and nutrients. The onggi vase with fine pores will promote the expression and maintenance of flower and leaf colors and may increase flower diameter by high air permeability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.395-404
• /
• 2021

Purpose. The purpose of present study was to evaluate the effect of changing structural stability of wax disc on the fit of prosthesis when the milling proceeded in order. Materials and methods. Prepared maxillary left first molar was used to fabricate a Ni-Cr alloy reference model. This was scanned to design crown and then wax pattern was milled, invested and cast to fabricate prosthesis. The wax patterns located in a row centrally within a single wax disc were set into a total of five groups ranging from WM1 group that was first milled to WM5 group that was last milled and the number of each group was set as 10. Silicone replica technique was used to measure the marginal gap, axial internal gap, line angle internal gap, occlusal internal gap. Data was evaluated with one-way ANOVA with significance level set at α = .05 and then Tukey HSD test was conducted for post analysis. Results. Marginal gap measured in each group, it was 40.41 ± 2.15 ㎛ in WM1 group, 40.44 ± 2.23 ㎛ in WM2 group, 39.96 ± 2.25 ㎛ in WM3 group, 39.96 ± 2.48 ㎛ in WM4 group, and 40.57 ± 2.53 ㎛ in WM5 group. No significant difference was found between groups. The significant difference between the groups was also not found in the axial internal gap, line angle internal gap, and occlusal internal gap. Conclusion. Internal and marginal fit of single crown to the sequential order of milling processing in the single machinable wax disc did not seem to be affected by the sequence.