• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.166-172
• /
• 2005

Response surface methodology (RSM) was applied to monitor the effects of steaming and roasting conditions of Polygonatum odoratum roots an total phenolics content, electron donating ability (EDA) and nitrite-scavenging ability (NSA) of the extract. In steaming and roasting processes based on the central composite design. with variations in steaming time $(60\~180\;min)$, roasting temperature $(110\~150\;min)$ and roasting time $(10\~50\;min)$, coefficients of determinations $(R^2)$ were 0.9356 (p<0.01) in total phenolics, 0.9578 (p<0.01) in EDA and 0.9436 (p<0.01) in NSA (pH 3.0). The maximum value of total phenolics was $2847.67\;mg\%$ at 135.59 min of steaming time, $143.84^{\circ}C$ of roasting temperature and 43.47 min of roasting time. The maximum value of EDA was $75.00\%$ in 108.98 min, $135.56^{\circ}C$ and 48.86 min. The maximum value of NSA (pH 3.0) was $87.38\%$ in 162.80 min, $143.88^{\circ}C$ and 31.97 min, respectively. Total phenolics content of the extract was influenced by heating conditions in the order of roasting temperature, steaming time and roasting time. While EDA and NSA were appreciably influenced by roasting time, followed by roasting temperature and steaming time.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.447-456
• /
• 2013

This study was carried out for the establishment of theory and foundational data for breeding, on variegated foliage plants using for potted plants, based on examination and analysis for shape, color, and area ratio of variegated leaves and chlorophyll contents. Six families, 18 genus, and 54 species of variegated plants domestically distributed in Korea were used as the plant materials. Patterns based on chlorophyll-deficient part in variegated leaves were divided into 20 types, such as steps, border, collapsed border, sandy border, half, silk, stars, vein, firewood, border and firewood, center, entirety, leaf, irregular, net, watermelon, melon, and so on. There were 10 kinds of colors including dark green, red, dark red, reddish white, reddish yellow, white, silver, silvery white, yellowish white, and yellow. The ratio of variegated area was ranged from 5.8% to 100% and it was diverse depending on species or cultivar. The ratios by patterns were highest in entirety (98.6%) and relatively high in step (60.8%), whereas, low in boarder, star and firewood (33.6-36.4%), and relatively low in half and vein (43%). Chlorophyll content of variegated leaf was rather lower compared to normal plants and chlorophyll b tended to be higher in ratio of chlorophyll a to b. Particularly content of chlorophyll b in Stromanthe sanguinea 'Triostar', Dracaena fragrans 'Massangeana Compacta', D. reflexa 'Song of India', and Tradescantia spathacea was higher than chlorophyll a in comparison with that of normal plants.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.2
• /
• pp.1-6
• /
• 1979

Diallel crosses among six silkworm varieties were used as the materials. by the randomized block design, and diallel cross analyse were conducted to determine the relationships between parents and their F$_1$hybrids. The six parents and their 30 F$_1$crosses were evaluated for five quantitative characters in each female and male silkworms. All methods utilized were similar in detecting lines giving unexpected performance in the F$_1$generation. Mean values of total cocoon weight and weight of cocoon layer of female silkworms were more than those of male silkworms, but mean values of cocoon layer ratio of female silkworms were less than those of male silkworms in both parents and 30 F$_1$hybrids. Over dominance was exhibited by total cocoon weight and weight of cocoon layer, and partial dominance was exhibited by periods (days) of larval stage, periods (days) of 5th instar and cocoon layer ratio (weight of cocoon layer/total cocoon weight). Furthermore, it was recognized that varieties F (Yunil) and E (Kyung-choo) were recommendable varieties as the parents in breeding of silkworms for increasing the total cocoon weight and weight of cocoon layer, etc.

• Korean Journal of Social Welfare
• /
• v.67 no.4
• /
• pp.127-152
• /
• 2015

This study aimed to implement the enhancement program for the social work practice competency for children of community child center workers and to evaluate the program's effects. For this purpose, the program was implemented for ten community child center workers five times for five weeks(once a week, 120 minutes per session). For the quantitative evaluation, a non-equivalent control group design among quasi-experimental designs was used, and for the qualitative evaluation, the written materials related with the program were collected and analyzed. The results of the quantitative evaluation revealed that the social work practice skills and worker-client relationship empowerment of the community child center workers who participated in the competency enhancement program were significantly improved. In the qualitative evaluation, the subjective experiences were presented, including the improvement of the worker's practice competency and the worker's awareness of the changes in the child, the recognition of the strong points and the points to be improved in the program. This study is expected to raise the expertise and effectiveness of community child center workers, and ultimately, to contribute to the healthy development and the improvement of the mental health of children by improving the social work practice competency of the workers in community child centers, which comprise the representative service delivery system for children in South Korea.

• Korean Journal of Childcare and Education
• /
• v.6 no.3
• /
• pp.85-102
• /
• 2010

The purpose of this study is analyzing newly the role of the educare teachers by finding the teachers' subjective perception on their duty and understanding its feature. With the research, I'd like to present the fundamental materials for re-training and education for specialty. I Q-sorted 17 teachers based on the 36 statements which had been selected carefully. The results are following. The first type is the teacher who is aiming the specialized education. The teacher of this type needs to have the comprehensible knowledge on the child-development and seeks the teacher's specialty with self-supervision and study group. The second type is the teacher who is pursuing safety and protection for the children. The teacher of this type considers safety and cleanness very important and thinks that he or she should take care of the children by the cooperation with parents. The third type is the teacher who is heading for everyday's life and improvement. He or she thinks that teaching the child daily life is significant and by it, the child should grow up. The results of the research show us 3 points. The first, we need to re-design training program for the educare teachers. The second, we should prepare the manual for the teachers in accordance with the infants' growing-up. The third, we should understand the teacher's type and train him or her in accordance with the type.

• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.37-48
• /
• 1996

The purpose of this study is to provide the valuable basic information that helps set the advanced direction of study in environmental pollution in the future. It classifies and analyzes 6, 531 papers according to their years, fields, and contents from 1962 to 1993 in Korea through Chunrian, a PC communication network, National Environment Research Institute(1989) in Seoul. Classifying papers by their fields, this study shows 19.6%(1, 281 papers) of total papers on water pollution, on which most emphasis was placed in the studies, 17.2%(1, 121 papers) on general remarks, 14.6%(952 papers) on environmental ecology, and 13.6%(891 papers) on air pollution. Classifying papers by their contents, this study tells us that the survey of state and evaluation of pollution degree took 28%(1, 829 papers) of total papers, and it seemed the most active study was carried out on this content. It then shows us that the treatment technology and mechanism shared 17.5%(1, 144 papers), and facilities and design took 1.9%(127 papers) which needed more studies in the future. As for the trends of study, the papers published until 1979 show that the water pollution accounted for 28.9% of total studies, on which the greatest emphasis was placed, while the papers in 1990s tell us that general remarks 34.7%, air pollution 14.9%, and water pollution 14.1%. It also shows that treatment technology and mechanism has had more importance since 1980s in water pollution, noise and vibration, waste materials, human wastes, and radioactive pollution. However, in sea pollution, policy and standard rather than treatment technology or method of measurement and analysis has been considered a more important one in 1990s. Analyzing the studies on general remarks, it tell us that the paper on environmental act, which were frequently conducted, accounted for 33.3% until 1979, while the papers on the environmental policy, in which the highest interest was kept, accounted 34.6% in 1990s. This study concludes that most papers had examined the survey on status and evaluation of pollution degree before 1980, while studies on solving the problems of environmental pollution have had more importance in the 1980s and 1990s. Therefore, in the future, more studies should be conducted actively on policy development to solve the problems of environment pollution as well as on encouragement of environmental consciousness.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.3
• /
• pp.1-26
• /
• 2020

The purpose of this study is to develop and implement new classes using the concept of personal color system to the section 'Daily Outfits & Clothing Acquisition' in the 2015 revision of middle school home economics curriculum, and find out the effects on middle school students. For this, We redesigned a curriculum for 'Clothing Outfits and Self-Expression' part using personal color system, developed teaching/learning plans and teaching/learning materials, and examined the changes in self-identity, attitude in clothing life, and class satisfaction among students at the end of the class. The results of this research are as follows. After the implementation of 'Daily Outfits & Clothing Acquisition' unit classes which included the concept of personal color system, the students' self-identity and attitude in clothing life were improved. And according to the results of the individual interviews, students were generally satisfied with the class. If the 'Daily Outfits & Clothing Acquisition' unit classes using personal color system is widely used in middle school home economics classes, it can have positive impacts on adolescents and is expected to be of great help to home economics teachers as a valuable class material.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.110-119
• /
• 2016

Purpose: This study is aimed to assess changes of stress distribution dependent on different connection lengths and placement of the fixture top relative to the ridge crest. Materials and methods: The internal-conical connection implant which has a hexagonal anti-rotation index was used for FEM analysis on stress distribution in accordance with connection length of fixture-abutment. Different connection lengths of 2.5 mm, 3.5 mm, and 4.5 mm were designed respectively with the top of the fixture flush with residual ridge crest level, or 2 mm above. Therefore, a total of 6 models were made for the FEM analysis. The load was 170 N and 30-degree tilted. Results: In all cases, the maximum von Mises stress was located adjacent to the top portion of the fixture and ridge crest in the bone. The longer the connection length was, the lower the maximum von Mises stress was in the fixture, abutment, screw and bone. The reduction rate of the maximum von Mises stress depending on increased connection length was greater in the case of the fixture top at 2 mm above the ridge crest versus flush with the ridge crest. Conclusion: It was found that the longer the connection length, the lower the maximum von Mises stress appears. Furthermore, it will help prevent mechanical or biological complications of implants.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.1
• /
• pp.109-117
• /
• 2016

This paper is focused on the determination of friction parameter which is a predominant factor in the design of inflatable structure system. This inflatable structure system is very valuably used to protect passively and rapidly the possibilities of tunnel damages by flooding threats and unusual leakage to be occurred during and after underground infrastructure construction. In particular, this system should be necessary in subsea tunnel. This study presents the experimental results obtained from the relative friction characteristics tests of the fabric materials that constitute the inflatable structure. In order to evaluate the relative friction behaviour of the inflatable structure system, friction tests and scaled model tunnel friction tests are carried out. The friction tests are carried out to determine the friction coefficient for different surface conditions between tunnel and inflatable structure. These friction coefficients are then evaluated and compared with the result obtained from the model tunnel friction tests. Interaction behaviours between tunnel and system are also reviewed and described in this study. The results clearly show that the friction coefficients derived from scaled model slippage tests are about 12% lower than values obtained from the friction tests. In addition, this study will be necessary to verify the real friction behaviour with prototype tests before applying in practice.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.3
• /
• pp.177-197
• /
• 2011

In this study, a series of fire experiments under $HC_{inc}$ and ISO834 (duration of 4 hour) fire scenarios were carried out for three different types of fire protection measures for the segment joint to evaluate their applicabilities to an immersed tunnel. The experimental results revealed that an expansion joint installed to allow relative movements between concrete element ends in an segment joint is the most vulnerable to a severe fire. For the fire protection measure where the originally designed steel plates at an expansion joint arc replaced by fire-resistant boards, the experiments showed that they cannot achieve good fireproofing performance under both $HC_{inc}$ fire scenario and ISO834 (4 hour) fire scenarios since the installation of fire-resistant boards results in the reduction of the sprayed fire insulation thickness. On the other hand, the application of modified bent steel plates replacing the original steel plates was proved to be very successful in fireproofing of the expansion joint due to more sprayed materials filled in bent steel plate than in the original design concept as well as higher adhesion between the steel plate and the sprayed fire insulation layer.