• The Journal of Society for e-Business Studies
• /
• v.22 no.1
• /
• pp.107-122
• /
• 2017

Nowadays, digital forensic experts are not only computer experts who restore and find deleted files, but also general experts who posses various capabilities including knowledge about processes/laws, communication skills, and ethics. However, there have been few studies about qualifications or competencies required for digital forensic experts comparing with their importance. Therefore, in this study, AHP questionnaires were distributed to digital forensic experts and analyzed to derive priorities of competencies; the first-tier questions which consisted of knowledge, technology, and attitude, and the second-tier ones which have 20 items. Research findings showed that the most important competency was knowledge, followed by technology and attitude but no significant difference was found. Among 20 items of the second-tier competencies, the most important competency was "digital forensics equipment/tool program utilization skill" and it was followed by "data extraction and imaging skill from storage devices." Attitude such as "judgment," "morality," "communication skill," "concentration" were subsequently followed. The least critical one was "substantial law related to actual cases." Previous studies on training/education for digital forensics experts focused on law, IT knowledge, and usage of analytic tools while attitude-related competencies have not given proper attention. We hope this study can provide helpful implications to design curriculum and qualifying exam to foster digital forensic experts.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.934-941
• /
• 2002

It is important to consider the effect of member size when estimating the ultimate strength of a concrete flexural member because the strength always decreases with an increase of member size. In this study, the size effect of a reinforced concrete (RC) beam was experimentally investigated. For this purpose, a series of beam specimens subjected to four-point loading were tested. More specifically, three different effective depth (d$\approx$15, 30, and 60 cm) reinforced concrete beams were tested to investigate the size effect. The shear-span to depth ratio (a/d=3) and thickness (20 cm) of the specimens were kept constant where the size effect in out-of-plane direction is not considered. The test results are curve fitted using least square method (LSM) to obtain parameters for the modified size effect law (MSEL). The analysis results show that the flexural compressive strength and the ultimate strain decrease as the specimen size increases. In the future study, since $\beta_1$ value suggested by design code and ultimate strain change with specimen size variation, a more detailed analysis should be performed. Finally, parameters for MSEL are also suggested.

• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.149-156
• /
• 2016

The service life in RC (Reinforced Concrete) is very important and it is usually obtained through deterministic method based on Fick's 2nd law and probabilistic method. This paper presents an evaluation of $P_{df}$(durability failure probability) and the related service life considering time-dependent behaviors in chloride diffusion and surface chloride content. For the work, field investigation is performed for RC structures exposed to chloride attack for 3.5~4.5years, focusing tidal zone (6.0 m) and sea shore (9.0 m), respectively. Random variables like cover depth, chloride diffusion coefficient, and surface chloride content are obtained, and $P_{df}$ and the service life are evaluated. Unlike the results from deterministic method using LIFE 365, probabilistic method with time effects on diffusion and surface chloride shows a relatively rapid change in the result, which is a significant reductions of service life in the case with low surface chloride content. For probabilistic evaluation of durability, high surface chloride content over $10.0kg/m^3$ is required and reasonable service life can be derived with consideration of time-dependent diffusion coefficient.

• Journal of Arbitration Studies
• /
• v.21 no.2
• /
• pp.85-112
• /
• 2011

These days utilization of copyright in daily life and economic activities is becoming more important than ever, and IT technology is developing day by day. Along with those fact, copyright infringement and dispute is naturally increasing. This thesis dealt with the 3 different issues of ADR on copyright. The First part, introduce ADR system that was performed by Korea Copyright Committee according to Copyright law. This paper evaluate the committee's efforts to provide resolution of copyright disputes via conciliation was effective. So it needs to be look over several countries' ADR, beside conventional judicial remedy. And Korea's copyright conciliation system which is successfully operating also introduced. Second, In many countries, including South Korea are take advantage of conciliation as the way to settle down the dispute over copyright. Furthermore, looked over if we can use arbitration as tool to settle dispute or not. Currently in Korea, patent dispute is handled by Industrial Property Dispute Conciliation Committee(The Invention Promotion Act Ch.5) and Layout-design Review and Mediation Committee(The Act on the Layout-designs of Semiconductor Integrated Circuits Art.29-34), but using performance of those two committee is still too low. In comparison, the copyright committee, a affiliation organization of the ministry of culture, sports and tourism has much more result in conciliation compare with patent dispute. Copyright disputes has arbitrability of it's subject-matter and many regulating organs are interested in it. (especially, binding of arbitral award and final resolution). Take advantage of both conciliation and arbitration could be good way to resolve copyright disputes. Third, the writer look at the proposal on the creation of Northeast Regional Center for Intellectual Property ADR. Because of the nature of copyright and rapid development of internet technology, international use of work become more frequent and accordingly infringement cases are increasing. The role of commercial arbitration regimes and institutions which has progressed significantly worldwide level, but which has only just begun in the intellectual property ADR area, leads also to a clash of often very different legal cultures and protection in a market economy. International cooperation in regional area with conflict interests becomes an important alternative. But it will depend on the building of regional institutions and mechanisms. The feasibility of this proposal and preconditions were examined. Establishment of new international organization requires a lot of time, cost and efforts. And risk of failure is much too high. Therefore factual, statistical review should be preceded. In addition, technical measures, such as on-line arbitration is necessary to review also. Furthermore in order to establish new organization, the relative law, legal environment, public sentiment and international compliance must be carefully considered with factual review about the needs and economic benefits of each country Yet on complex regulatory matters such as IP and ADR, a great deal of the potential benefits from international standards arises not from the international legal framework nor even the formal content of national legislation, but from the informed and effective use made of the possibilities within the system, including by policymakers and regulators.

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.130-137
• /
• 2005

In total body irradiation (T81) for leukemia, we have a two methode. One is a AP (anterior-posterior) method and the other is a Lateral methode. Our hospital used lateral methode. T81 must consider about body contour, because of homogeneous dose distribution. For compensation about irregular body contour, we use compensator. For T81 treatment, we must be considered, accurate manufacture of compensator and accurate calculation of dose. We developed the automatic program for T81. This program accomplished for compensator design and dose calculation for irregular body. This program was developed for uses to use in a windows environment using the IDL language. In this program, it use energy data for each energy: TMR, output factor, inverse square law, spoiler, field size factor. This program reduces the error to happen due to the manual. As a development of program, we could decrease the time of treatment plan and care the patient accurately.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.269-279
• /
• 2002

When we inject a current into an electrically conducting subject such as a human body, voltage and current density distributions are formed inside the subject. The current density within the subject and injection current in the lead wires generate a magnetic field. This magnetic flux density within the subject distorts phase of spin-echo magnetic resonance images. In Magnetic Resonance Current Density Imaging (MRCDI) technique, we obtain internal magnetic flux density images and produce current density images from $\bigtriangledown{\times}B/\mu_\theta$. This internal information is used in Magnetic Resonance Electrical Impedance Tomography (MREIT) where we try to reconstruct a cross-sectional resistivity image of a subject. This paper describes numerical techniques of computing voltage. current density, and magnetic flux density within a subject due to an injection current. We use the Finite Element Method (FEM) and Biot-Savart law to calculate these variables from three-dimensional models with different internal resistivity distributions. The numerical analysis techniques described in this paper are used in the design of MRCDI experiments and also image reconstruction a1gorithms for MREIT.

• Research in Community and Public Health Nursing
• /
• v.15 no.4
• /
• pp.551-565
• /
• 2004

Purpose: The purpose of this study is to develop a day care center model focused on public health institutions for the elderly residing in their homes. Method: Research design for this study was a mult-level research, which consisted of a related literature review, an Internet search for knowledge of the current situation at home and abroad, on-site interviews, questionnaires collected from a sample of residents in a rural area, and a key-informants approach. Results: 1) The subjects of service - Generalized service should be provided to the elderly, 65 years and older, regardless of their assets. 2) The contents of service - Providing pre-health oriented and post-social welfare service that can integrate and satisfy a wide variety of public health and welfare needs of the elderly would strengthen the health care service of a day care center for the elderly. 3) Delivery system - Basic-level local self-governments should become a central operating body, and establishing a properly adjusted delivery system to a rural area after considering the efficiency and the access of vulnerable rural areas is needed based on modification of 'a Special Law for Agricultural and Fishery Areas' (rural public health center>rural health sub-center ${\rightarrow}$ unified health sub-center ${\rightarrow}$ public health hospital (public health center) ${\rightarrow}$ public welfare office). 4) Facility - Public health facilities such as public health centers and sub-centers should be located in areas that can easily access the facilities. 5) Funding - For day care center for the elderly in local self-government, the central government should modify a relevant implementation of subsidy in and provide some facilities and service regardless of the degree of self reliance of local self-government. 6) Human resources - It is needed to guarantee the period of workers of a day care center for the elderly, at least 3 to 5 years, with considering their specialty on aged care and avoiding circulation based positions. Furthermore, appropriate specially trained personnel such as medical workers and social workers should be placed to take care of both health service and welfare through strengthening of 'rules of law of elderly welfare,' Conclusion: future research is needed to test the model through a demonstration study using a model which may be developed in the future and to standardize the appraisal criteria of people hoping to enter a day care center for the elderly.

• 전기의세계
• /
• v.28 no.4
• /
• pp.53-63
• /
• 1979

Interface recombination velocity in $Al_{x}$G $a_{1-x}$ As-GaAs and $Al_{0.85}$, G $a_{0.15}$ As-GaA $s_{1-y}$S $b_{y}$ heterojunction systems is studied as a function of lattice mismatch. The results are applied to the design of highly efficient III-V heterojunction solar cells. A horizontal liquid-phase epitaxial growth system was used to prepare p-p-p and p-p-n $Al_{x}$G $a_{1-x}$ As-GaA $s_{1-y}$S $b_{y}$-A $l_{x}$G $a_{1-x}$ As double heterojunction test samples with specified values of x and y. Samples were grown at each composition, with different GaAs and GaAs Sb layer thicknesses. A method was developed to obtain the lattice mismatch and lattice constants in mixed single crystals grown on (100) and (111)B oriented GaAs substrates. In the AlGaAs system, elastic lattice deformation with effective Poisson ratios .mu.$_{eff}$ (100=0.312 and .mu.$_{eff}$ (111B) =0.190 was observed. The lattice constant $a_{0}$ (A $l_{x}$G $a_{1-x}$ As)=5.6532+0.0084x.angs. was obtained at 300K which is in good Agreement with Vegard's law. In the GaAsSb system, although elastic lattice deformation was observed in (111) B-oriented crystals, misfit dislocations reduced the Poisson ratio to zero in (100)-oriented samples. When $a_{0}$ (GaSb)=6.0959 .angs. was assumed at 300K, both (100) and (111)B oriented GaAsSb layers deviated only slightly from Vegard's law. Both (100) and (111)B zero-mismatch $Al_{0.85}$ G $a_{0.15}$As-GaA $s_{1-y}$S $b_{y}$ layers were grown from melts with a weight ratio of $W_{sb}$ / $W_{Ga}$ =0.13 and a growth temperature of 840 to 820 .deg.C. The corresponding Sb compositions were y=0.015 and 0.024 on (100) and (111)B orientations, respectively. This occurs because of a fortuitous in the Sb distribution coefficient with orientation. Interface recombination velocity was estimated from the dependence of the effective minority carrier lifetime on double-heterojunction spacing, using either optical phase-shift or electroluminescence timedecay techniques. The recombination velocity at a (100) interface was reduced from (2 to 3)*10$^{4}$ for y=0 to (6 to 7)*10$^{3}$ cm/sec for lattice-matched $Al_{0.85}$G $a_{0.15}$As-GaA $s_{0.985}$S $b_{0.015}$ Although this reduction is slightly less than that expected from the exponential relationship between interface recombination velocity and lattice mismatch as found in the AlGaAs-GaAs system, solar cells constructed from such a combination of materials should have an excellent spectral response to photons with energies over the full range from 1.4 to 2.6 eV. Similar measurements on a (111) B oriented lattice-matched heterojunction produced some-what larger interface recombination velocities.ities.ities.s.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.194-204
• /
• 2006

The effects of the particle size and the structure of carbon blacks on the friction and the wear behavior of filled natural rubber were investigated in this study. The particle size and the structure of carbon black had a significant effect on the wear rates and the worn surface pattern, and the effect of them on abrasion resistance should be considered for the optimum design of desired wear properties. Ten carbon blacks with various sizes and structures are mixed with natural rubber in order to investigate the effects on the wear rate ($W_R$). The friction and the wear behavior were examined by self-made blade type friction-wear abrader, and the ,elation with characteristic parameter (${\psi}=\sqrt{{N_2^2}+{DBP^2}}$), obtained from the particle size and the structure, was studied. The wear rate ($W_R$) had a Power Law relation with the frictional work ($W_f$) and it was inversely proportional to the characteristic parameter of carbon black. It means that smaller particle size and better structure development of carbon black resulted in improved abrasion resistance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.747-752
• /
• 2006

In this paper, the adaptive fuzzy sliding mode controller with two systems is designed. The existing sliding mode controller used to $approximation{\^{u}}(t)$ with discrete sgn function and sat function for keeping the state trajectories on the sliding surface[1]. The proposed controller decrease the disturbance for uncertain control gain and This paper is concerned with an Adaptive Fuzzy Sliding Mode Control(AFSMC) that the fuzzy systems ate used to approximate the unknown functions of nonlinear system. In the adaptive fuzzy system, we adopt the adaptive law to approximate the dynamics of the nonlinear plant and to adjust the parameters of AFSMC. The stability of the suggested control system is proved via Lyapunov stability theorem, and convergence and robustness properties ate demonstrated. Futhermore, fuzzy tuning improve tracking abilities by changing some sliding conditions. In the traditional sliding mode control, ${\eta}$ is a positive constant. The increase of ${\eta}$ has led to a significant decrease in the rise time. However, this has resulted in higher overshoot. Therefore the proposed ${\eta}$ tuning AFSMC improve the performances, so that the controller can track the trajectories faster and more exactly than ordinary controller. The simulation results demonstrate that the performance is improved and the system also exhibits stability.