• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.523-533
• /
• 2015

Three-dimensional flow phenomena in a wire-wrapped 37-pin fuel assembly mock-up of a Japanese loop-type sodium-cooled fast reactor, Monju, were investigated with a numerical analysis using a general-purpose commercial computational fluid dynamics code, CFX. Complicated and vortical flow phenomena in the wire-wrapped 37-pin fuel assembly were captured by a Reynolds-averaged Navier-Stokes flow simulation using a shear stress transport turbulence model. The main purpose of the current study is to understand the three-dimensional complex flow phenomena in a wire-wrapped fuel assembly to support the license issue for the core design. Computational fluid dynamics results show good agreement with friction factor correlation models. The secondary flow in the corner and edge subchannels is much stronger than that in an interior subchannel. The axial velocity averaged in the corner and edge subchannels is higher than that averaged in the interior subchannels. Three-dimensional multiscale vortex structures start to be formed by an interaction between secondary flows around each wire-wrapped pin. Behavior of the large-scale vortex structures in the corner and edge subchannels is closely related to the relative position between the hexagonal duct wall and the helically wrapped wire spacer. The small-scale vortex is axially developed in the interior subchannels. Furthermore, a driving force on each wire spacer surface is closely related to the relative position between the hexagonal duct wall and the wire spacer.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.137-145
• /
• 2015

Mobile's health care and diagnostic capabilities are accepted as the most innovative sectors, and the combination with wearable device is being predicted as the future's most promising industries. However, the level of consumer acceptance and utilization is still insufficient compared to the development of technology. This study explores the use intention of wearable device based on previous studies about health apps. In particular, health-related use efficacy of the app, app use intention and app satisfaction are analyzed through a structural equation model. The use of health-related apps revealed that there is a statistically significant relationship with the use of the wearable device. The results suggest that the importance of app use efficacy, satisfaction, apps use should be considered for the successful diffusion of wearable health devices.

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.43-51
• /
• 2017

The automatic welding systems, have received much attention in recent years, because they are highly suitable not only to increase the quality and productivity, but also to decrease manufacturing time and cost for a given product. Automatic welding work in semiconductor or space industry to be carried out in pipe line and butt joint mostly and plasma arc welding(PAW) is actively applied. To get the desired quality welds in automated welding system is challenging, a mathematical model is needed that has complete control over the relevant process parameters in order to obtain the required mechanical properties. However, In various industries the welding process mathematical model is not fully formulated for the process parameter and on the welding conditions, therefore only partial variables can be predicted. Therefore, this paper investigates the interaction between the welding parameters and mechanical properties for predicting the weld bead geometry by analyzing the S/N ratio.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.18-23
• /
• 2007

Fe65, a neuron-specific adaptor protein, has two phosphotyrosine binding (PTB) domains. The second PTB (PTB2) domain interacts with intracellular domain fragment (AICD) of amyloid beta precursor protein (APP). Recent studies suggested that tile complex is composed of AICD and Fe65 transactivates genes that are responsible for neuronal cell death in Alzheimer's disease (AD). Therefore, a compound inhibiting the interaction between Fe65 and AICD can be a drug candidate to treat AD. However, it remains unclear how Fe65 recognizes AICD at a molecular level. Here, we report high-level production of the PTB2 domain of Fe65 in the baculovirus system. We found that the baculovirus system is an efficient method to obtain the Fe65 PTB2 domain, compared with the bacterial and mammalian expression systems. The purified recombinant protein was used for crystallization to determine its crystal structure helping to understand the molecular mechanism of Fe65-dependent signaling and to design its inhibitors.

• The Journal of Korean Medicine
• /
• v.33 no.4
• /
• pp.1-8
• /
• 2012

Objectives: The purpose of this study was to specify major tongue diagnostic indicators and evaluate their significance in discriminating pattern identification subtypes in stroke patients. Methods: This study used a community based multi-center observational design. Participants (n=1,502) were stroke patients admitted to 11 oriental medical university hospitals between December 2006 and February 2010. To determine which tongue indicator affected each pattern identification, a decision tree analysis of the chi-square automatic interaction detector (CHAID) algorithm was performed. The chi-squared test was used as the criterion in splitting data with a p-value less than 0.05 for division, which is the main procedure for developing a decision tree. The minimum sample size for each node was specified as n =10, and branching was limited to two levels. Results: From the 9 tongue diagnostic indicators, 6 major tongue indicators (red tongue, pale tongue, yellow fur, white fur, thick fur, and teeth-marked tongue) were identified through the decision tree analysis. Furthermore, each pattern identification was composed of specific combinations of the 6 major tongue indicators. Conclusions: This study suggests that the 6 tongue indicators identified through the decision tree analysis can be used to discriminate pattern identification subtypes in stroke patients. However, it is still necessary to re-evaluate other pattern identification indicators to further the objectivity and reliability of traditional Korean medicine.

• Journal of Distribution Science
• /
• v.18 no.8
• /
• pp.113-125
• /
• 2020

Purpose: The purpose of this paper is to investigate the effect of interaction between product category (fresh vs. indulgent product) and shopping options (shipping charge and delivery time) on customer satisfaction and purchase intent in an e-commerce context. When ordering groceries online, consumers begin to allocate a larger share of their grocery budget toward product categories that generally contain healthier items at the expense of product categories that generally contain more indulgent products. Moreover, customers are extremely sensitive to shipping options such as shipping charges and delivery time. Therefore, this research investigates the issue at a more segmented level to focus on the impact that one dimension of logistics service quality - product category, shipping charge, and delivery time have on customer satisfaction and purchase intent. Research design, data, and methodology: To test the theoretically derived priori hypotheses concerning product category, shipping charges, delivery time, satisfaction, and purchase intent, this research presented a scenario-based experiment. Eight treatment groups were assigned by the method of product category (fresh produce vs. indulgent product), shipping charge (free vs. paid), and delivery time (one-day vs. two to three days). A total of 240 subjects were divided into groups and exposed to one of the eight scenarios. Participant's purchase intention was the dependent variable, and ANOVA and L-matrix were used to analyze for main and interactive effects between factors. Conclusions: Results indicated that in tests 1 and 2, free shipping and fast delivery time increased consumer satisfaction as well as purchase intent, and fast delivery moderated the impact of free shipping on consumer satisfaction and purchase intent. Test 3 showed that the effect of free shipping on consumer satisfaction and purchase intent moderated by fast delivery for indulgent products. In contrast, fast delivery for fresh products moderated the effect of paid shipping on consumer satisfaction and purchase intent. Consistent with this proposed mechanism, the relative importance of fresh produce versus indulgent products highlights the effect of shipping options on consumer satisfaction and purchase intent when ordering the target product in an e-commerce context. We conclude with a discussion of the theoretical and practical implications of our findings.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.661-665
• /
• 2001

This paper deals with optimal mooring system to secure fish cage in a desired location, Through field investigation and paper works, we surveyed disasters by breakdown of cage frame and mooring system due to higher wave attack and selected compliant buoy mooring method for shallow water mooring system against severe coastal external forces. To analyze interaction between external forces and compliant buoy mooring system, theoretical model has developed as quasi-static nonlinear analysis. After verifying the feasibility of the numerical model compared with experiment, static analysis has tried for various mooring systems with different angle of array, number of mooring points, length of horizontal and inclined rope. Optimal mooring method using compliant buoy has selected for fish cage through numerical simulation. This results can apply for preliminary design for cage mooring system.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.410-415
• /
• 2004

Employing knowledge of adaptive possibilities of agents in multi-agents system, we have explored new aspects of distributed modular systems for building ubiquitous heterogeneous robotic systems using intelligent building blocks (I-BLOCKS) [1] as reconfigurable modules. This paper describes early technological approaches related to technical design, experimental developments and evaluation of adaptive processing and information interaction among I-BLOCKS allowing users to easily develop modular robotic systems. The processing technology presented in this paper is embedded inside each $DUPLO^1$ brick by microprocessor as well as selected sensors and actuators in addition. Behaviors of an I-BLOCKS modular structure are defined by the internal processing functionality of each I-Block in such structure and communication capacities between I-BLOCKS. Users of the I-BLOCKS system can easily do 'programming by building' and thereby create specific functionalities of a modular robotic structure of intelligent artefacts without the need to learn and use traditional programming language. From investigating different effects of modern artificial intelligence, I-BLOCKS we have developed might possibly contain potential possibilities for developing modular robotic system with different types of morphology, functionality and behavior. To assess these potential I-BLOCKS possibilities, the paper presents a limited range of different experimental scenarios in which I-BLOCKS have been used to set-up reconfigurable modular robots. The paper also reports briefly about earlier experiments of I-BLOCKS created on users' natural inspiration by a just defined concept of modular artefacts.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.6
• /
• pp.51-59
• /
• 2007

According to developments in info-communication, the recent educational paradigm asks not for a passive transmitter but an active constructor who can solve a variety of complicated problems in real situations. Such a change asks for an educational setting which includes sharing ideas and information rather than simply possessing them. Learning through presentation has many problems including few presentation opportunities as well as the reuse of presentation data. This study suggests such strategies as promoting interactions through presentations and the practical use of these strategies in class. For this, the role of the presentation data provider and learner, and strategies to implement the step by step learning support system have been suggested. Using presentations, as described in this study, allow for communication with students outside the original class time and location. The degree of learning students experience through presentations is expected to be high.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.9-19
• /
• 2002

An NAC(Natural Admittance Control) system design is presented for interaction controller that achieves high-performance and guarantees stability. The NAC can be classified as a particular flavor of impedance control similar to control schemes that have velocity compensator and force compensator. The NAC significantly improves the response characteristics when Coulomb friction is presented in One-link Robot System and guarantees stability when robot contacts with environment. Pragmatic rules for NAC synthesis are derived. It shows method to choose a target impedance for realizable force compensator. Important parameters are found experimentally. It is demonstrated, by the experimental result, that NAC algorithm is successful in rejecting Coulomb friction through velocity compensator and guarantees stability through force compensator. We implement an experimental set-up consisting of environment-generated one-link robot system and DSP system for controller development. We apply the natural admittance controller to the One-link robot system, and show the good performance on desired force control in case of contacting with arbitrary environment.