• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.89-100
• /
• 2006

Recently, lots of lives and properties have been lost because comparatively large magnitude earthquakes were occurred in relatively safe regions and nations. It has been reported that number of earthquakes was increased rapidly in Korea. Hence, recently civil constructions were ensured against risks about earthquake not only large-scale structures but also comparative small-scale structures such as reservoir dams and life line by systematic aseismic design. Therefore, in this study, the seismic stability was ensured to evaluate aseismic performance for major planned reservoir dams in Korea. The seismic response analyses were conducted using SHAKE program on new reservoir dams under short-period, long-period and artificial seismic wave. The liquefaction potential for reservoir dams was assessed by using results from seismic response analysis (simplified assessment method for liquefaction potential). Also, fully coupled analysis--interaction of pore-pressure and soil--was performed to investigate both the development of excess pore water pressure and the characteristic of dynamic shear strain.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.3-38
• /
• 2000

Slope draperies in soil and rock are a well known method to avoid rockfalls into the roads or onto housings. Common wire mesh or a combination of wire mesh and wire rope nets are pinned to the slope by the means of fully grouted nails or anchors. Most of these installations have not been designed to stabilize the slope, but simply avoid the rocks from bouncing. The combination of soil- or rocknailing with a designable flexible facing system offers the advantage of a longterm stabilization of slopes and can replace other standard methods for slope stabilization. The capability to transfer axial and shear loads from the flexible facing system to the anchor points is most decisive for the design of the stabilization system. But the transfer of forces by mesh as pure surface protection devices is limited on account of their tensile strength and above all also by the possible force transmission to the anchoring points. Strong wire rope nets increase the performance for slope stabilizations with greater distances between nails and anchors and are widely used in Europe. However, they are comparatively expensive in relation to the protected surface. Today, special processes enable the production of diagonally structured mesh from high-tensile steel wire. These mesh provide tensile strengths comparable to wire rope nets. The interaction of mesh and fastening to nail / anchor has been investigated in comprehensive laboratory tests. This also in an effort to find a suitable fastening plates which allows an optimal utilization of the strength of the mesh in tangential (slope-parallel) as well as in vertical direction (perpendicular to the slope). The trials also confirmed that these new mesh, in combination with suitable plates, enable substantial pretensioning of the system. Such pretensioning increases the efficiency of the protection system. This restricts deformations in the surface section of critical slopes which might otherwise cause slides and movements as a result of dilatation. Suitable dimensioning models permit to correctly dimension such systems. The new mesh with the adapted fastening elements have already been installed in first pilot projects in Switzerland and Germany and provide useful information on handling and effects.

• Journal of Digital Contents Society
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2009

One important issue to generalize the ubiquitous paradigm is the development of user-centralized and intelligent ubiquitous computing systems. Sharing knowledge and correct communication between users and devices are needed to be aware of continuous changed context information and infer services for which users are suited. The goal of this paper is to describe and manage effectively the meaning of services or data which each device offers for interaction between users and devices based on semantic relationships and reasoning. In this paper, we represent semantic data using OWL and design a ubiquitous based intelligent system. We propose some index structures and strategies to process queries classified by each subsystem and adopt labeling schemes to identify classes and resources in the semantic data. We can find devices which satisfies various user's requests exactly and quickly using the proposed strategies.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.3
• /
• pp.46-52
• /
• 2015

Pump-turbine system is widely used by the hydropower industry for stabilizing the electrical grid in the vast growing economy of most developed countries. This study only investigates the Fluid-structure Interaction (FSI) analysis of the pump-turbine system at various operating conditions. The FSI analysis can show how reliable each component of the system is by providing the engineer with a better understanding of high stress and deformation points, which could reduce the lifespan of the pump-turbine. Pump-turbine components are categorized in two parts, pressurized static parts and movable stressed parts. The fixed parts include the spiral casing, top and bottom cover, stay vane and draft tube. The movable parts include guide vanes and impeller blades. Fine hexahedral numerical grids were used for CFD calculation and fine tetrahedral grids were used for structural analysis with imported load solution mapping greater than 90 %. The maximum equivalent stress are much smaller than the material yield stress, and the maximum equivalent stress showed an increasing tendency with the varying of operating conditions from partial to excessive at both modes. In addition, the total deformation of all the operating conditions showed a small magnitude, which have quite small influence on the structural stability. It can be conjectured that this system can be safely implemented.

• Child Health Nursing Research
• /
• v.9 no.4
• /
• pp.384-391
• /
• 2003

Purpose: This study was implemented to develop new nursing intervention, Meridian Massage, and to investigate its effect on weight, behavioral state in infants. Method: This study has been conducted on the non equivalent control group pretest-posttest design in quasi experimental basis and newly born infants from Postpartum Management Center were selected in two groups of 35 infants. Data has been collected from February 1st to October 30th of 2002. The experimental group(20) took Meridian massage for 15 minutes daily twice during 6 days and control group took Field massage as same time. Weight has been determined 10:00 hours everyday morning and behavior status has been determined before and after 5 minutes beth by Anderson et al.(1990) tools. Data was analyzed by SPSS 11.0 Program using t-test, χ2-test and repeated measures ANOVA. Result: The results were as follow. In the aspect of behavioral status, Meridian massage group(55.8%) showed increase「positive」state than Field massage group(42.6%). And there was statistical significance(p=.002). Meridian massage group showed higher in the average weight than Field massage group(F=6.753, p=.014), and there was significant term between the two groups(F=10.129, p=.000). But there was no interaction group and term. Conclusion: The Meridian Massage in this study showed more positive aspect in weight gain and positive behavior status than Field Massage. This study has informed that meridian massage is an effective nursing intervention in improving Infant development.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.2
• /
• pp.67-76
• /
• 1999

Resonance of the bridge can be occurred with the coincidence between a natural frequency of the bridge and a crossing frequency of moving loads which is determined from the speed and effective beating interval of the vehicle. In case of the railway bridge, the effective beating interval of the vehicle is fixed under the passage of specific trains. In the present study, resonance and cancellation of the bridge subjected to moving high-speed train are analyzed with the variations of span length. A steel-concrete composite railway bridge is idealized by the combinations of plate elements and space frame elements. High-speed train is idealized with moving constant forces and a 3-dimensional full modelling. From analyzing dynamic responses of D.M.F of vertical displacement, maximum vertical acceleration of the slab, and end rotation according to the variations of span length of the bridge, design criteria of span length of the bridge which satisfies dynamic safety is discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.3
• /
• pp.69-77
• /
• 2013

This research validates the correlation between usability and functional attributes whilst comparing the degree of satisfaction of information framework used in museum mobile apps via usability evaluation in pre-visit setting. In cases of Bilbao Guggenheim and American Natural History Museum apps, the degree of satisfaction measured for information service, functional attributes, motivation for actual museum visit and during-visit usability of the apps were all highly evaluated. Such evaluation data indicates the increased usability of apps when mobile applications take user-friendly design that intuitively reflect users' interests and needs. After thorough analysis of correlation between usability and fictional attributes, data pointed to more meaning relationships existed in non-intrusiveness and personalization than other functional attributes. In conclusion, we were able to acknowledge the usability of museum mobile apps depends upon the interaction between content and functional attributes rather than entertainment factor and technology.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.121-127
• /
• 2007

Direct acting pressure relief valve applicable to propellant tank of launch vehicle is modeled in this study The flow resistance of the partially opened valve is modeled as a function of the distance of the valve stem from the resting position. The position of the valve varies transiently as a function of its mass, the spring force, sliding friction, and the pressure differential. Choking at valve throat and compressibility are considered for the analysis. This study presents systematic analysis method for pressure relief valve applicable to propellant tank of liquid rocket. The results shows transient flow resistance caused by stem motion and the importance of choking at valve throat for pressure relief valve design.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.647-655
• /
• 2008

Microsomal prostaglandin E2 synthase (mPGES-1) is a potent target for pain and inflammation. Various QSAR (quantitative structure activity relationship) analyses used to understand the factors affecting inhibitory potency for a series of MK886 analogues. We derived four QSAR models utilizing various quantum mechanical (QM) descriptors. These QM models indicate that steric, electrostatic and hydrophobic interaction can be important factors. Common pharmacophore hypotheses (CPHs) also have studied. The QSAR model derived by best-fitted CPHs considering hydrophobic, negative group and ring effect gave a reasonable result (q2 = 0.77, r2 = 0.97 and Rtestset = 0.90). The pharmacophore-derived molecular alignment subsequently used for 3D-QSAR. The CoMFA (Comparative Molecular Field Analysis) and CoMSIA (Comparative Molecular Similarity Indices Analysis) techniques employed on same series of mPGES-1 inhibitors which gives a statistically reasonable result (CoMFA; q2 = 0.90, r2 = 0.99. CoMSIA; q2 = 0.93, r2 = 1.00). All modeling results (QM-based QSAR, pharmacophore modeling and 3D-QSAR) imply steric, electrostatic and hydrophobic contribution to the inhibitory activity. CoMFA and CoMSIA models suggest the introduction of bulky group around ring B may enhance the inhibitory activity.

• The Research Journal of the Costume Culture
• /
• v.26 no.2
• /
• pp.251-263
• /
• 2018

As mobile shopping has increased in the new media age, fashion consumers' decision making and product consumption processes have changed. The volume of consumer-driven information has expanded since media and social networking sites have enabled consumers to share information they obtain. The purpose of this study was to determine the factors affecting information searching strategies and information sharing about fashion products. An online survey collected data from 466 respondents, relating to the influence of product price level and consumer SNS commitment level on information search and information sharing. Experimental design of three product price level and two consumer SNS commitment level was used. Analysis of the data identified factors in fashion information searching as ongoing searching, prepurchase web portal information search, and prepurchase marketing information search. For low-price fashion products, prepurchase product-detail influenced intention to share information. For mid-priced products, ongoing search significantly affected intention to share information. Both ongoing search and prepurchase marketing information search showed significant effects for high-price products. Consumers who are more committed to SNS engaged in significantly more searching in all aspects of information search factors. Significant interaction effect was detected for consumer SNS commitment level and product price level. When consumers with low consumer SNS commitment search for information on lower-priced fashion products, they are less likely do a prepurchase web portal information search.