• 한국실내디자인학회논문집
• /
• 제26호
• /
• pp.57-63
• /
• 2001

The aim of this study is to measure sensitivity reaction of human being with a physical properties of color and average size of particle for building materials and predict the influence of color and average size of particle in evaluation of building materials. As a results, 1) In results of qualitative evaluation construction, all 16 adjectives were extracted by higher evaluation items and ,total 14 adjectives were extracted as evaluation adjectives except adjectives of a contrary concept in each other. 2) According to the result of factor analysis, all 4 group of $\ulcirner$potency$\lrcirner$, $\ulcirner$activity$\lrcirner$, $\ulcirner$evaluation$\lrcirner$, $\ulcirner$warmness$\lrcirner$ were extracted. In this time, $\ulcirner$potency$\lrcirner$ as the first factor indicates the most hign original value. Consequently, $\ulcirner$potency$\lrcirner$ factor have an hign influence in evaluation of building materials. 3) As a influence analysis of evaluation variable by evaluation item $\ulcirner$potency$\lrcirner$ factor have an high influence by influence of average size of a particle, $\ulcirner$activity$\lrcirner$ factor have influence hignly by influence of brightness, $\ulcirner$evaluation$\lrcirner$ factor have an hign influence by influence of average site of a particle and the hue, $\ulcirner$warmness$\lrcirner$ factor have an hign influence mainly by influence of the hue

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.211-220
• /
• 2011

최근 대중교통지향형개발(TOD)이 활발해지며, 역세권의 환경 변화를 통하여 국내의 대중교통 이용 증진을 시키기 위해서는 TOD 통합계획요소를 종합적으로 고려한 역세권 유형과 이용수요에 관한 실증분석이 전제되어야 향후 계획수립시 활용이 가능 할 것이다. 본 연구는 서울시 역세권을 대상으로 다양한 TOD 영향요인을 파악하고, 대중교통 이용수요와 연관성을 규명하기 위한 실증분석을 진행하였다. TOD의 대표적 요소인 Density, Diversity, Accessibility에 대한 자료를 수집하고, 요인분석과 회귀모형을 구축하였다. 분석결과 (1) 요인분석을 토대로 7개 영향요인이 도출되었으며, Factor 1(Diversity/토지이용복합도 (LUM)), Factor 2(Density/개발밀도수준), Factor 3(Accessibility/대중교통시설공급수준), Factor 4(Design/가로설계수준), Factor 5(Green/연계교통시설(보행자, 자전거), Factor 6(Design/지하철시설규모), Factor 7(Accessibility/대중교통운영수준)로 유형화되었다. (2) 요인-회귀분석 결과를 토대로 역세권 승하차 인원에 긍정적(+) 영향을 미치는 주요 요인은 Factor 1(Diversity : 토지이용복합도(LUM) 요인), Factor 3(Accessibility : 대중교통시설공급수준), Factor 2(Density : 개발밀도수준), Factor 5(Design/연계교통시설(보행자, 자전거), Factor 6(지하철시설규모)로 나타났다. 다음으로 역세권의 승하차 인원에 부정적(-) 영향은 Factor 7(Accessibility/대중교통운영수준)로 나타났으며, 가장 높은 영향력을 가지는 것으로 나타났다. 이는 지하철과 버스의 배차간격이 증가할 경우 이용수요가 감소하기 때문이다.

• 한국실내디자인학회논문집
• /
• 제25권6호
• /
• pp.61-69
• /
• 2016

A study on how fire officer's job satisfaction factors influence space satisfaction rates. This article will conduct regression analysis for the study on these three problems. 'What are the factors of fire officer's job satisfaction?', 'Does space satisfaction rates influence job satisfaction rates?', 'Which job satisfaction factor influence space satisfaction rate?' Therefore, variables were set based on the prior study, and before regression analysis was conducted, variables were purified through analysis on primary factor and reliability analysis, and hypothesis test was done via variable calculation. According to the prior study, factors that influence job satisfaction rates are as following; self-regulation of tasks, ethics and responsibility level, relationship with colleagues, job identity. And regression analysis showed that space satisfaction rates do not influence job satisfaction rates. The writer thinks that it's showing that Korean fire officers tend to prioritize colleague relationship and job identity over space improvements. And the factor that influence job satisfaction rates turned out to be the self-regulation of tasks, and the writer estimates that it's reflecting the hierarchical organization culture of current Korean fire officers. Therefore, future Korean fire station design plans need to consider a space plan that provides fire officer's private self-regulation of tasks.

• 한국의상디자인학회지
• /
• 제14권2호
• /
• pp.101-111
• /
• 2012

The purpose of this study is to evaluate the differences of visual image on variations in the length and princess line, in a silhouette of a one-piece dress with the application of the 3D Virtual Clothing System known as i-designer. Eight sample were examined: 2 variations of the length and 2 variations of the princess line, 2 variations of the form of a silhouette. The data was obtained from 66 fashion design majors. The data was assessed by a t-test and a multi-way ANOVA and factor analysis. The results were as follows; The visual image according to the design variables, four factors were selected; the attractiveness factor, the activeness factor, the practicality factor, the elegance factor. In these factors, the attractiveness factor is estimated by the most important factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the activeness factor, a significant difference was noted in the two-way interaction between the length and the princess line, the length and the silhouette. In the elegance factor, a significant difference was noted in the two-way interaction between the length and the silhouette. However, the influence on three-way interaction among the length, the princess line, and the silhouette was not significant.

• 한국의상디자인학회지
• /
• 제23권4호
• /
• pp.1-17
• /
• 2021

This study was examined whether the experiential marketing factors proposed by Bernd Schmitt were applicable to the consumer behavior of active seniors. The study was analyzed the influence of SEMs have on value perception of brand and attitude formation as well as the behavioral intentions of active senior consumers and whether this effect differed between the level of commitment. For empirical analysis, frequency analysis, EFA, reliability, CFA, SEM, and multiple-group comparison analysis were performed. The results showed that sense and feel factor did not have a significant influence on the value perception of brand, while think factor had a positive effect on the value perception of brand. Act factor did not affect the value perception of brand; on the other hand, relate factor had a significant effect on the value perception of brand. The result of structural equation modeling also revealed that the value perception of brand had a positive influence on attitude formation and behavioral intentions. The result of multiple-group comparison analysis confirmed that the influence of act factor on value perception of brand differed according to the level of commitment, but the positive influence of act factor on value perception of brand was limited to the high-level of commitment group. As a result of the influence relate factor had on the value perception of brand, differences existed between the two groups, and the low-level of commitment group had a greater influence than the high-level of commitment group. So it will be effective for active senior consumers to form fashion communities and let them participate in to enhance positive consumer behavior toward fashion brands.

• 한국정보통신학회논문지
• /
• 제25권3호
• /
• pp.412-418
• /
• 2021

본 연구는 스마트폰 제품디자인에서 감성공학 요소가 브랜드 선호도와 충성도에 미치는 영향을 알아보고자 한다. 감성공학 요소를 색상, 성능, 사용성, 가치, 신뢰성으로 나누고, 브랜드 선호도와 충성도의 관련성을 실증 분석하였다. 분석결과 스마트폰 제품디자인에서 감성공학 요소는 브랜드 선호도에 정적 영향을 미치며 영향력이 큰 요소는 성능, 색상 요소로 나타났다. 스마트폰 제품디자인에서 감성공학 요소는 충성도에 정적 영향을 미치며 영향력이 큰 요소는 신뢰성, 성능 요소로 나타났다. 제품디자인에서 브랜드 선호도가 높을수록 충성도에 영향을 크게 미친다. 제품디자인 감성공학 요소 중에서 영향력이 있는 요소를 파악함으로써 소비자들의 특성에 맞는 제품디자인에 관한 접근이 필요하다.

• 한국실내디자인학회논문집
• /
• 제20권3호
• /
• pp.242-248
• /
• 2011

According to a study on the accident patterns of older people in 2006 by Korea Consumer Agency (CISS), the number of accidents of the elderly at home reached 486, and the figure has increased every year. As Korea is about to enter into the aged society, it is important to investigate the factors that cause an accident in the welfare facilities for the aged and establish the barrier-free construction standards. The accident influence factors include facility environmental, physical functional, socio demographic and socio psychological factors. In terms of the verification tools, there are Facility Evaluation Index, FIM, MMSE-K and General Feature. In terms of analysis method, in addition, there are real number, percentage, t-test, ANOVA and logistic regression. In conclusion, this paper attempts to reveal correlations among the accident influence factors using the Facility Evaluation Standards (115 items in total) for facility environmental factor, FIM (3 items) for physical functional factor, MMSE-K (6 items) for socio psychological factor and questionnaire (5 items) for socio demographic factor.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.175-188
• /
• 2016

The construction of a new cavern modifies the state of stresses and displacements in a zone around the existing cavern. For multiple caverns, the size of this influence zone depends on the ground type, the in situ stress, the cavern span and shape, the width of the pillar separating the caverns, and the excavation sequence. Performances of underground twin caverns can be unsatisfactory as a result of either instability (collapse) or excessive displacements. These two distinct failures should be prevented in design. This study simulated the ultimate and serviceability performances of underground twin rock caverns of various sizes and shapes. The global factor of safety is used as the criterion for determining the ultimate limit state and the calculated maximum displacement around the cavern opening is adopted as the serviceability limit state criterion. Based on the results of a series of numerical simulations, simple regression models were developed for estimating the global factor of safety and the maximum displacement, respectively. It was proposed that a proper pillar width can be determined based on the threshold influence factor value. In addition, design charts with regard to the selection of the pillar width for underground twin rock caverns under similar ground conditions were also developed.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.53-63
• /
• 1997

This study examines the influence of some dimensional errors on the shudder-type disturbance of the tripod joint and vehicle, using an experimental evaluation and related simulation. With the introduction of the concept of influence factor, the sensitivities of shudder-type disturbance can be evaluated as the ratio of the difference between the ideal value without dimensional errors and actual value with them in the tripod joint and vehicle. Futhermore, influence factors calculated in this study can be utilized as a basic design data for the practical application of the tripod joint to an automobile design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.92-96
• /
• 2004

In this paper, polishing method using bonded magnetic abrasive particle has been applied to the micro mold polishing. Through process control using the Run-to-Run control, it tried to form the surface roughness In order to grasp the influence of the surface roughness which is reached by selection of control factor and the factor, a design of experiment was been processed. The study is processed with a purpose of to embody and to maintain the surface roughness of nano scale by the basis of an influence between a control factor and the factors which has been selected in this way. As a result, the result of the process control converged at a target value of surface roughness Ra 10nm and Rmax 50nm