• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1433-1443
• /
• 1993

DCT(Discrete Cosine Transform) / IDCT(Inverse DCT) is widely used in various image compression and decompression systems as well as in DSP(Digital Signal Processing) applications. Since DCT/ IDCT is one of the most complicated part of the compression system, the performance of the system can be greatly enchanced by improving the speed of DCT/IDCT operation. In this thesis, we designed a DCT/IDCT core processor using module generator technique. By utilizing the partial sum and DA(Distributed Arithmetic) techniques, the DCT/ IDCT core processor is designed within small area. It is also designed to perform the IDCT(Inverse DCT) operation with little additional circuitry. The pipeline structure of the core processor enables the high performance, and the high accuracy of the DCT/IDCT operation is obtained by having fewer rounding stages. The proposed design is independent of design rules, and the number of the input bits and the accuracy of the internal calculation coa be easily adjusted due to the module generator technique. The accuracy of the processor satisfies the specifications in CCITT recommendation H, 261.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.307-315
• /
• 2017

Random number generator(RNG) is essential in cryptographic applications. As recently a system using small devices such as IoT, Sensor Network, SmartHome appears, the lightweight cryptography suitable for this system is being developed. However due to resource limitations and difficulties in collecting the entropy, RNG designed for the desktop computer are hardly applicable to lightweight environment. In this paper, we propose a lightweight RNG to produce cryptographically strong random number using sensors. Our design uses a Hankel matrix, block cipher as the structure and sensors values as noise source. Futhermore, we implement the lightweight RNG in Arduino that is one of the most popular lightweight devices and estimate the entropy values of sensors and random number to demonstrate the effectiveness and the security of our design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1631-1636
• /
• 2010

In this study, we demonstrate a nano-scale lithograph obtained on localized (100) silicon (p-type) surface using by modified AFM (Atomic force microscope) apparatuses and by adopting controlling methods. AFM-based experimental apparatuses are connected to a customized pulse generator that supplies electricity between the conductive tip and the silicon surface, while maintaining a constant humidity throughout the lithography process. The pulse durations are controlled according to various experimental conditions. The electrochemical reaction induced by the pulses occurs in the gap between the conductive tip and silicon surface and result in the formation of nanoscale oxide particles. Oxide particles with various heights and widths can be created by AFM surface modification; the size of the oxide particle depends on the pulse durations and the applied electrical conditions under a humid environment.

• Nuclear Engineering and Technology
• /
• v.42 no.1
• /
• pp.97-108
• /
• 2010

Fluid-elastic instability and turbulence-induced vibration of steam generator U-tubes of a nuclear power plant are studied numerically to investigate the effect of design changes of support structures in the upper region of the tubes. Two steam generator models, Model A and Model B, are considered in this study. The main design features of both models are identical except for the conditions of vertical and horizontal support bars. The location and number of vertical and horizontal support bars at the middle of the U-bend region in Model A differs from that of Model B. The stability ratio and the amplitude of turbulence-induced vibration are calculated by a computer program based on the ASME code. The mode shape with a large modal displacement at the upper region of the U-tube is the key parameter related to the fretting wear between the tube and its support structures, such as vertical, horizontal, and diagonal support bars. Therefore, the location and the number of vertical and horizontal support bars have a great influence on the fretting wear mechanism. The variation in the stability ratios for each vibrational mode is compared with respect to Model A and Model B. Even though both models satisfy the design criteria, Model A shows substantial improvements over Model B, particularly in terms of having greater amplitude margins in the turbulence-excited vibration (especially at the inner region of the tube bundle) and better stability ratios for the fluid-elastic instability.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.125-132
• /
• 2006

The construction of an emergency generator's diagnosis system for the preparation of emergency in nuclear plant is vital. To construct a knowledge base of the diagnosis system, the classes and a causality model should be designed. In order to design those elements, at first. object of the diagnosis system should be defined. After the investigation of normal and abnormal states. the external knowledge such as entities and activities is extracted, that the operational principle of the system. For the conversion of the extracted external knowledge to the internal one, the entities are defined as classes and the activities converted into the causality. Through the recursive configuration of the causality and proper examination, the diagnosis knowledge applicable to the knowledge base is completed. In this paper, it is possible to construct a knowledge base with high portability since the independence of design model is considered through the decision table.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.460-474
• /
• 2023

A simple but accurate mathematical model is crucial for dynamic simulations and controller design of helical coil once-through steam generator (OTSG). This paper presents a three-region movable boundary dynamic model of the helical coil OTSG. Based on the secondary side fluid conditions, the OTSG is divided into subcooled region (two control volumes), two-phase region (two control volumes) and superheated region (three control volumes) with movable boiling boundaries between each region. The nonlinear dynamic model is derived based on mass, energy and momentum conservation equations. And the linear model is obtained by using the transfer function and state space transformation, which is a 37-order model of five input and three output. Validations are made under full-power steady-state condition and four transient conditions. Results show good agreements among the nonlinear model, linear model and the RELAP5 model, with acceptable errors. This model can be applied to dynamic simulations and controller design of helical coil OTSG with constant primary-side flow rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.683-688
• /
• 2018

Recently, the demand for electric energy has been increasing due to the spread of hybrid electric vehicles. In this study, to meet this demand, the ANSYS MAXWELL electromagnetic simulation system was used to compare the power generation characteristics of three types of suspension system that can generate electricity using energy harvesting technology. Next, the optimal design was determined for each model by using the commercial PIDO (Process Integration and Design Optimization) tool, PIANO (Process Integration, Automation and Optimization). We selected three design variables and constructed an approximate model based on the experimental design method through electromagnetic analysis for 18 experimental points derived from Orthogonal Arrays among the experimental design methods. Then, we determined the optimal design by applying the Evolutionary Algorithm. Finally, the optimal design results were verified by electromagnetic simulation of the optimum design result model using the same analysis conditions as those of the initial model. After comparing the power generation characteristics for the optimal structure for each linear generator model, the maximum power generation amounts in the 8pole-8slot, 12pole-12slot, and 16pole-16slot structures were 366.5W, 466.7W and 579.7W, respectively, and it was found that as the number of slots and poles increases, the power generation increases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1161-1166
• /
• 2017

Recently, with the development of display technology, AMOLED(Active Matrix OLED) panel production and demand are increasing. Unlike LCD, AMOLED panel basically does not need backlight, so it can output clear images with low power consumption. Therefore, the AMOLED market is growing globally. Accordingly, the demand for inspection devices required for production is also expanding. The inspection device of the AMOLED panel aging system operates in conjunction with MES(Manufacturing Execution System) and MIS(Management Information System), and it is efficient to construct network environment. The inspection device used for panel aging is a pattern generator capable of outputting multiple signals. Efficient design is required to operate multiple signal generators. To solve this problem, the proposed system proposed a method for remotely controlling the signal generator remotely and a method for driving the AMOLED panel. And the timing and power setting results are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.312-317
• /
• 2005

Fluid-elastic instability and turbulence excitation for an under developing steam generator are investigated numerically. The stability ratio and the amplitude of turbulence excitation are obtained by using the PIAT (Program for Integrity Assessment of Steam Generator Tube) code from the information on the thermal-hydraulic data of the steam generator. The aspect ratio, the ratio between the height of U-tube from the upper most tube support plate (h) and the width of two vertical portion of U-tube (w), is defined for geometric parameter study. Several aspect ratios with relocation of tube support plates are adopted to study the effects on the mode shapes and characteristics of flow-induced vibration. When the aspect ratio exceeds value of 1, most of the mode shapes at low frequency are generated at the top of U-tube. It makes very high value of the stability ratio and the amplitude of turbulent excitation as well. We can consider that the local mode shape at the upper side of U-tube will develop the wear phenomena between the tube and the anti-vibration bars such as vertical, horizontal, and diagonal strips. It turns out that the aspect ratio reveals very important parameter for the design stage of the steam generator. The appropriate value of the aspect ratio should be specified and applied.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.103-112
• /
• 2010

A study on network traffic analysis and modeling has been exclusively done due to its importance. However, conventional studies on network traffic analysis and modeling only focus on transmitting simple packet stream or traffic features of specific application, such as HTTP. In this paper, we propose a network traffic generator, which reflects the characteristics of multimedia data. To analyze the traffics of online game, which is one of the most popular multimedia contents, we modeled the distribution according to the time between packets and packet size random variable and designed the traffic generator which has the model for input. We generated the traffics of L4D(Left4Dead), WoW(World of Warcraft) with proposed network traffic generator and we found that the generated traffics have similar distributions with real data.