• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.444-449
• /
• 2010

The generation of electric power using self excited induction generation (SEIG) is a viable option in remote and rural areas where grid electricity is not available. The generated voltage and frequency of these machines, however, varies with varying loads. This characteristic can be resolved either by adjusting the values of the excitation capacitance or by controlling the prime mover speed. Further, in a single-point constant power application, where the machines deliver a fixed amount of power, the electronic load controller (ELC) can be used to switch-in or switch-out a dump load whenever the consumer load decreases or increases respectively. This paper presents a detailed analysis and the design of a microcontroller based SEIG -ELC system intended for stand-alone pico hydro power generation. The simulated performance of the controller is supplemented by experimental results.

• 전기학회논문지P
• /
• 제53권3호
• /
• pp.103-109
• /
• 2004

This paper has presented, taking an example of a gas separation plant, dynamic analysis on frequency decline caused by the over-loading at the generator and the knee point causing voltage instability due to reactive power required by re-acceleration of large induction motors, resulting in phenomena of failure in the conventional frequency load shedding. In order to resolve the voltage instability problem, a design of load shedding system employing under-voltage relays has been proposed to the industrial power system containing large induction motors in addition to the conventional load shedding employing frequency relays. For the purpose of dynamic analysis, models of gas turbine and governor, synchronous generator, brushless exciter, and induction motor are introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.113-115
• /
• 1995

The calculations of the temperature rise in the armature have long been considered among some of the most important problems in the design of the rotating machine. Despite the many methods of calculation propose, very few have been used in the actual design. In most cases, These methods are inadequate for measuring a wide range of temperature distribution because of the complicated structure of the machine. In this paper, the armature is divided into seven portions, and the thermal equivalent circuit is introduced as a simulation of the armature. The test machine is 1000Kw salient-pole synchronous generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.924-927
• /
• 2003

In this paper, we design the memory tester chip set playing an important role in the memory tester as central parts. Memory tester has the sixteen inner instructions to control the test sequence and the address and data signals to DUT. These instructions are saved in memory with each chip such as sequence chip and address/data generator chip. Sequence chip controls the test sequence according to instructions saved in the memory. And Generator chip generates the address and data signals according to instructions saved in the memory, too.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.153-155
• /
• 2004

In this paper, we design the memory tester chip playing an important role in the memory tester as central parts. Memory tester has the sixteen inner instructions to control the test sequence and the address and data signals to DUT. These instructions are saved in memory with each block such as sequencer and pattern generator. Sequencer controls the test sequence according to instructions saved in the memory. And Pattern generator generates the address and data signals according to instructions saved in the memory, too. We can use these chips for various functional test of memory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.138-142
• /
• 2004

Recently over dropped frequencies of power system were recorded when power system was unbalanced between generation and demand. Therefore load following characteristic analysis of thermal and combined cycle power plant generators is necessary for low frequency condition analysis of power system. Frequency simulator supplies simulated frequency to the online generator for prescribed goal. This simulator needs to minimize effects to power system and requires stability first. This paper introduces design and manufacturing case of frequency simulator for load following characteristic analysis of generators.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.245-248
• /
• 2006

The first of korean 750kW gearless type wind turbine is developed. The wind turbine is designed, manufactured and tested by GE regulation and obtained the design certificate by GL. And the performance test is being performed at the demonstration site now. This paper presents the history of development and performance test for 750kW gearless type wind turbine.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.356-361
• /
• 2006

본 연구에서는 T-S 퍼지시스템으로 모델된 불확실한 시변 파라메터를 갖는 비선형 시스템의 고장검출 시스템 설계법을 제안한다. 이를 위하여 퍼지시스템에 대한 소인수 분해를 정의하고 좌 소인수를 이용하여 오차발생기를 설계한다. 오차 발생기의 출력으로부터 고장검출을 판정하는 검출기준을 제시한다. 제시된 방법의 효용성을 입증하기 위하여 역도립 진자시스템에 적용하여 컴퓨터 모의실험을 수행한다.

• Journal of Multimedia Information System
• /
• 제8권4호
• /
• pp.285-294
• /
• 2021

The development process of domestic CG (Computer Graphics) needs to be studied by classifying the technical part and the design part. This paper analyzes how early domestic broadcast equipment evolved and focused on what went through the development process. Domestic broadcasting companies have introduced and used overseas equipment and have begun to develop their own technology. The development process of the early domestic production technology of broadcasting stations was classified into Character Generator, On-line Real-Time Graphic and Sport Coder. It was found that the orientation of broadcasting technology was conclusively focused on visualization, with socio-cultural factors acting along with the evolution of hardware and software. This research is meaningful in reorganizing the history of the development process of domestic CG technology in the early days through previous research (primary verification), newspaper articles and news coverage (secondary verification). This paper looks at what is missing by regaining the past of CG, and argues that with the advent of new technologies today, we must develop through appropriate division of roles and collaboration between engineers and designers.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 추계학술발표대회
• /
• pp.779-781
• /
• 2007

Nowadays, as the increasing functionality and scales of embedded systems, system design grows more complex than before. So verification and simulation of systems become an important facet in hardware-software co-design issues. But it is almost impossible to simulate an embedded system without real hardware implementation or environment communication, especially for control-dominated reactive systems. Therefore, in this paper, we will introduce a GUI environment module generator for integrated Esterel\C++ simulation. By generating the GUI modeling environment, we can simulate and verify the whole embedded system conveniently.