• Transactions on Electrical and Electronic Materials
• /
• v.7 no.2
• /
• pp.90-95
• /
• 2006

An on-line diagnostic test has been studied and performed for the pumped storage generator/motor. This study aims at reducing the diagnostic cost, minimizing the technical dependency on third party manufactures. Further design of on-line diagnostic system such as shorted-turn of rotor winding, partial discharge (PD) of stator winding and air-gap between stator and rotor for pumped storage generator/motor has been verified. In addition, it needs to be validated on site performance of the developed continuous on-line monitoring system for corresponding tasks for the improvement of the availability & reliability during operation.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.369-376
• /
• 2004

The tinnitus retraining therapy(TRT) is an effective method for treating tinnitus patients. This therapy use the white noise to stimulate auditory cells for a wide frequency range. In this paper, the small white noise generator using the thermal noise is proposed. And frequency response controller which can compensate the frequency response changed by the human outer and middle ear system is proposed. We can know that proposed system is more proper type on a purpose of the tinnitus retraining therapy comparing with conventional white noise generator.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.4
• /
• pp.6-13
• /
• 1970

The variable-width and double-pulse generator Here described is completely transistorized so its size is small and it is convenient to handle. The frequency ran be varied from 1 KHz to 500KHz, the pulse width from 0.4$\mu$sec to 8$\mu$sec, amplitude from 1V to 10V, and interval of double pulse from 0$\mu$sec to 12$\mu$sec. Positive and negative signal or double pulse trains can he obtained. An analysis has been carried out for each stage and the design equations are derived. The experimental results are compared with the analysis.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.321-328
• /
• 1998

A controller and sensor fault tolerant system jot a steam generator is designed with fuzzy logic. A structure of the : proposed fault tolerant redundant system is composed of a supervisor and two fuzzy weighting modulators. A supervisor alternatively checks a controlled and a sensor induced performances to identify Which Part, a controller or a sensor, is faulty. In order to analyze controller induced performance both an error and a charge in error of the system output an chosen as fuzzy variables. The fuzzy logic jot a sensor induced performance uses two variables : a deviation between two sensor outputs and its frequency, Fuzzy weighting modulator generates an output signal compensated for faulty input signal. Simulations show that the : proposed fault tolerant control scheme jot a steam generator regulates welt water level by suppressing fault effect of either controllers or sensors. Therefore through duplicating sensors and controllers with the proposed fault tolerant scheme, both a reliability of a steam generator control and sensor system and that of a power plant increase even mote.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.4
• /
• pp.446-453
• /
• 1997

The superconducting winding in rotor of a superconducting generator should be kept at extremely low temperature of 4-5 K to maintain the superconducting state. For this purpose the liquefied helium is used for the coolant and it is very important to analyze and design a cooling system making effective use of the coolant. In this paper, the typical heat exchanger of a superconducting generator with the flow passage is analyzed with regard to the thermal equilibrium. An experimental constant relevant to the flow condition in the flow passage is determined with heat exchange experiments in cryostat. Also a new heat exchanger with porous material is proposed and designed. Results of the numerical analysis for the temperature distributions for the torque tube and the coolant are reported and the efficiency of the heat exchanger is discussed from the viewpoint of amounts of coolant needed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.3
• /
• pp.88-95
• /
• 2008

In the paper, the permanent magnet synchronous generator of 1.5[MW] output power which is driven directly without gear system is designed by conventional magnetic equivalent circuit method and analyzed by finite element method. We analyzed the characteristics of generator like no load, rated load, short circuit condition and demagnetization of permanent magnet in order to verify the design results by magnetic circuit method. The last, the analysis results of two kinds of rotor types are compared with each other. Especially the THD(total harmonic distortion) of output voltage is examined for the comparison.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.696-698
• /
• 2000

A new high voltage generator is designed and basic performance analysis by 2D-FEA is performed. The new generator is able to supply electricity directly to the high voltage grid without the need for a step-up transformer. For the 2D-FEA analysis, the generator model is coupled to external circuit components with inductance and end-winding resistance.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.372-376
• /
• 2009

This paper describes the characteristics of piezoelectric micro power generators by the ANSYS FEA(finite element analysis). The micro power generator was designed to convert ambient vibration energy to electrical power as a ZnO piezoelectric material. To find optimal model in low vibration ambient, the shape of power generator was changed with different membrane width, thickness, length, and proof mass size. Using the ANSYS modal analysis, bending mode and stress distribution of optimal model were analyzed. Moreover, the displacement with the frequency range was analyzed by harmonic analysis. From the simulation results, the resonance frequency of optimal model is about 373 Hz and investigate the possibility of ZnO micro power generator for ambient vibration applications.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.45-54
• /
• 2004

Usually, according as accumulation degree of semi-conductor element increases, dynamic mistake test time increases sharply, and use of pattern generator is essential at manufacturing process to solve these problem. In this paper, we designed the PLD(Programmable Logic Device) circuit of pattern generator to examine dynamic mistake of semi-conductor element. Such all item got result that is worth verified action of return trip and function through simulation, and satisfy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1006-1009
• /
• 2008

We suggest the digital voice encryption module using the pseudo random number generator and design the security device of a telephone using the module. The proposed method provides encryption method of the telephone against the third party. This encryption method uses pseudo random number generator which computes the encryption key using the shared secret key and the current time value.