• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1495-1506
• /
• 2023

For the safe disposal of high-level radioactive waste using Engineered Barrier Systems (EBS), bentonite buffer is used by its high swelling capability and low hydraulic conductivity. When the bentonite buffer is contacted to heated pore water containing ions by radioactive decay, chemical alterations of minerals such as illitization reaction occur. Illitization of bentonite indicates the alteration of expandable smectite into non-expandable illite, which threatens the stability and integrity of EBS. This study intends to provide a thorough review on the information underlying in the illitization of bentonite, by covering basic clay mineralogy, smectite expansion, mechanisms and observation of illitization, and illitization in EBS. Since understanding of smectite illitization is crucial for securing the safety and integrity of nuclear waste disposal systems using bentonite buffer, this thorough review study is expected to provide essential and concise information for the preventive EBS design.

• International Journal of Aerospace System Engineering
• /
• 제10권1호
• /
• pp.1-13
• /
• 2023

The present study was attempted to investigate flow interference effects and the aerodynamic characteristics of the front and rear wings of a joined-wing aircraft by changing the configuration variables. The study was performed using a computational fluid dynamics(CFD) tool to demonstrate forward flight and analyze aerodynamic characteristics. A total of 9 configurations were analyzed with variations on the position, height, dihedral angle, incidence angle, twist angle, sweepback angle, and wing area ratio of the front and rear wings while the fuselage was fixed. The quantities of aerodynamic coefficients were confirmed in accordance with joined-wing configurations. The closer the front and rear wings were located, the greater the flow interference effects tended. Interestingly, the rear wing did not any configuration change, the lift coefficient of the rear wing was decreased when adjusted to increase the incidence angle of the front wing. The phenomenon was appeared due to an effective angle of attack alteration of the rear wing resulting from the flow interference by the front wing configurations.

• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.135-141
• /
• 1998

The objective of this study is to examine the specific progress in modern architecture with a premise that structure-oriented paradigm, as a primary factor, exerts a strong impacts on 18th and 19th centuries architecture. For this purpose, the concept and meaning backgrounds of structure-oriented paradigm have been checked also intrinsic thought s and critical aspects of modern architecture with the light of structure-oriented paradigm have been studied, This study summarized as follows: 1) The concept of structure-oriented paradigm in accordance with ideologies and technologies is framework of through which is shared as collective consciousness. 2) The backdrops of this consciousness are scientific methodologies stemmed from Renaissance and Enlightenment spiritual absoluteness claimed by German Idealists developed structural engineering with newly introduced material like iron steel and reinforced concrete. 3) The intrinsic through in architectural theories are rational and technological idelolgies which is derived from the backdrops of structure-oriented paradigm. 4)The critical sapects of modern architecture in structure-oriented paradigm point of view are $\circled1$ material alteration and directive imitation of vocabularies in classical architecture with simply using newly introduced building material and structure systems $\circled2$ morphological substitution with abstractly interpreted materials and structure systems $\circled3$ revolutionary conversion into engineering architecture through maximum consideration in compliance with tectonics capabilities

• 복식문화연구
• /
• 제16권5호
• /
• pp.924-936
• /
• 2008

The purpose of this thesis is to discuss corsets that represent an undergarment that later became a popular outerwear. It discusses its forms and distinct characteristics to help create a unique fashion design and its execution. The scope of this study is limited to works from the 1990s to the present, and the materials for the literatures and exploratory study are fashion-related portfolios and the domestic and foreign fashion magazines. The results of this study are summarized as follows: The standard look of corsets in modern fashion can be classified into styles of glamour, revival, and dismantle. The materials used vary from traditional fabrics such as satin or lace to newly developed materials such as metal or glass. Its presentation can also differ in that it may be used as an accessory with additional details, as an outerwear, as an extra decorative layer, or as a revealing innerwear by open outerwear. Characteristics of these various looks of corsets are; first, it redefines the revival of the traditional corsets through introduction of its historic elements and its compromise. Second, glamorous and feminine images are maximized through drastic and direct exposure by using tight lacing, a waist nipper or garter belts that emphasize a woman's curve. Third, it represents borderless dismantlement through experimental and irregular images using unconventional materials, new execution techniques, or alteration from the standard forms.

• 한국대기환경학회지
• /
• 제19권3호
• /
• pp.297-306
• /
• 2003

Works were focused on back pressure characteristics of ceramic fiber filter on DPF (Diesel Particulate Filter) system and experiments were performed to select appropriate filter which can filter particulates. Filters were installed on metal -support tube which has openings for exhaust gas flow. Ceramic fiber filters with high specific surface area and adequate high temperature strength are commercially available for filtration of diesel particulates and in -situ hot regeneration. Thus, ceramic blanket and ceramic board which are used as insulating media were applied to filter and filtration apparatus was installed on exhaust gas line connected to 2.0 L diesel engine. Alternating filter structure to adapt DPF system, collection efficiency test of diesel particulates was measured. In case of ceramic blanket, pressure drop was low, caused by the destruction of soft structures. Also, particulate collection efficiency was decreased depending on loading time. In case of ceramic board, structure design was altered to reduce back pressure on DPF system. Structure design was altered to induce Z-flow by making 10 mm and 5 mm holes on the surface of media. Alteration of 5 mm hole showed that media have low back pressure but particulate collection efficiency was 77%, while 10 mm hole showed that of 90%.

• 한국의상디자인학회지
• /
• 제4권3호
• /
• pp.65-73
• /
• 2002

The purpose of this study was to prepare lesson plans, study aids and multimedia learning materials for the clothing units in TechnologyㆍHome economics of the 7th national curricula. It's also meant to utilize these materials in instruction in order to provide students with more direct and practical learning experience and make them capable of leading a successful life in the 21st century. 1. The teaching plans were mapped out for the clothing units in TechnologyㆍHome economics class for middle school grade 2, which were all covered by eight textbooks: clothing and life(the function of clothes, my attire, wearing a suit, and wearing Korean traditional dress), the preparation of garments(the type of fiber, understanding of stuff, and preparing garments), and cloth care and storage (washing, storage, alteration and recycling). 2. The lesson plans included information on the name of units, period, learning objectives, teaching environment, materials, learning content, introduction, development, remarks, topping off, announcement for next session, and related Web sites. 3. To raise the effect of education, study aids were developed to be appropriate for the units. The lesson plans and study aids for the clothing part of TechnologyㆍHome economics class for middle school grade 2 would serve to help students build the right clothing habits, and are expected to serve as good teaching materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.616-619
• /
• 2003

This work presents the design, fabrication and microwave performance of distributed analog phase shifter (DAPS) fabricated on $(Ba,\;Sr)TiO_3$ (BST) thin films for X-band applications. Ferroelectric BST thin films were deposited on MgO substrates by pulsed laser deposition. The DAPS consists of high impedance coplanar waveguide (CPW) and periodically loaded tunable BST interdigitated capacitors (IDC). In order to reduce the insertion loss of DAPS and to remove the alteration of unloaded CPW properties according to an applied dc bias voltage, BST layer under transmission lines were removed by photolithography and RF-ion milling. The measured results are in good agreement with the simulated results at the frequencies of interest. The measured differential phase shift based on BST thin films was $24^{\circ}$ and the insertion loss decreased from 1.1 dB to 0.7 dB with increasing the bias voltage from 0 to 40V at 10 GHz.

• 한국실내디자인학회논문집
• /
• 제13권6호
• /
• pp.82-90
• /
• 2004

The purpose of this study is to investigate the remodeling of apartments housing unit according to the area type and size in order to provide useful information for future plans for more consumer-friendly dwelling units. To achieve this goal quantitative data analyses were employed. The sample was a total of 100 apartments analysed in previous researches conducting case studies on apartments remodeling. The data were analyzed by SPSS WIN program package in terms of frequency, percentage, and x2-test. The results of the study are as follows: The change of finishing materials were made in almost all of the sample. 6.4, 8.6 and 10.6 categories were altered in the small, medium, and large apartments respectively out of 21 remodeling categories. In the case of communal areas, change of finishing materials and installation, removal, and change of lighting fixtures were most frequent. The most frequent alteration in private areas was also observed In change of finishing materials and installation, removal and change of lighting fixtures.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.247-255
• /
• 2013

This study develops size sections and specifications for females 7-18 years old. The specifications will contribute to the development of precise virtual models that represent basic data for the size alteration of 3D virtual models. A total of 33 items from the $5^{th}$ Size Korea data set were adopted and analyzed. Two representative factors (Obesity and Height Factors) were identified through a factor analysis of the 33 items. Waist circumference and stature were selected as representative variables for Obesity and Height Factors, respectively, and conducted cross tabulations between waist circumference and height for the age groups of 7-12 and 13-18 year-olds. Size sections were developed for the development of 3D models based on the results. A regression analysis then developed size specifications for each section with independent variables of waist circumference and height as well as dependent variables of reference body size. Subsequently, Obesity Factors were better explained by waist circumference and Height Factors were better explained by stature. Finally, size specifications for each section were developed.

• 한국생활과학회지
• /
• 제13권1호
• /
• pp.135-144
• /
• 2004

The purpose of this study was to investigate the wearing sensation and satisfaction of high school girls winter uniform' jacket. The subject participated in the study were 599 high school girls attending four different schools. The fabrics were divided into two parts of stretch and non-stretch woven fabrics. The results were as follows: 1. The high school girls showed body image distortion that she recognized herself as fatter than her real body type. Especially, this was severe in the slim body type. 2. In the aspect of the satisfaction for uniforms' jacket made with stretch fabric and non-stretch woven fabric. the elastic fabric was more satisfied than the non-stretch one because its width and length was shorter and fitter than non-stretch one. 3. When they wore the school uniform jacket, the wearing sensation of one made with stretch and non-stretch woven fabrics showed significant differences in arms hole when raising hands, front bust when carrying backpack on their back, backs while studying at desks, the upper arms and the elbows. 4. As for the alteration of school uniform jacket, the non-stretch woven fabric was appeared to be altered more than the stretch one.