• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.15-21
• /
• 2015

Rifling Force can be described with projectile velocity, gas pressure and rifling angle, etc. Under the same conditions, the character of the rifling angle decisively influences the rifling force. To reduce the harmful effect, locally distinct maximum of rifling force has to be avoided. The optimal design methodology of rifling angle curve had been developed by combined Fourier series and polynomial function. When it was tried newly to design the rifling angle curve, this design trial caused not to produce the lower rifling force than the existing design. Normally, the curve of the rifling angle is designed first, then the rifling force is set according to the rifling angle curve. However during the cause analysis, new design methodology was established to design the ideal rifling force curve before the rifling angle design. With this new methodology, the above optimal design method was analyzed and its limitation was confirmed.

• Nuclear Engineering and Technology
• /
• v.39 no.3
• /
• pp.193-206
• /
• 2007

The Korea Atomic Energy Research Institute has developed an advanced fast reactor concept, KALIMER-600, which satisfies the Generation IV reactor design goals of sustainability, economics, safety, and proliferation resistance. The concept enables an efficient utilization of uranium resources and a reduction of the radioactive waste. The core design has been developed with a strong emphasis on proliferation resistance by adopting a single enrichment fuel without blanket assemblies. In addition, a passive residual heat removal system, shortened intermediate heat-transport system piping and seismic isolation have been realized in the reactor system design as enhancements to its safety and economics. The inherent safety characteristics of the KALIMER-600 design have been confirmed by a safety analysis of its bounding events. Research on important thermal-hydraulic phenomena and sensing technologies were performed to support the design study. The integrity of the reactor head against creep fatigue was confirmed using a CFD method, and a model for density-wave instability in a helical-coiled steam generator was developed. Gas entrainment on an agitating pool surface was investigated and an experimental correlation on a critical entrainment condition was obtained. An experimental study on sodium-water reactions was also performed to validate the developed SELPSTA code, which predicts the data accurately. An acoustic leak detection method utilizing a neural network and signal processing units were developed and applied successfully for the detection of a signal up to a noise level of -20 dB. Waveguide sensor visualization technology is being developed to inspect the reactor internals and fuel subassemblies. These research and developmental efforts contribute significantly to enhance the safety, economics, and efficiency of the KALIMER-600 design concept.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.1-15
• /
• 2005

For every country, the flag is a major symbol that represents the country. Establishing image though the use of the country's symbol is more important for achieving national competitiveness in this global age. In Korea, Taekuki has not been actively applied to fashion products, however Korean people began to realize the Taekuki as a motif of fashion with 2002 World Cup. Thus, research on fashion product development applying Taekuki is needed. This research developed designs for fashion product development applying Taekuki. In addition, through suggesting various applied motives, this research explored the product possibility of global fashion design that represents Korean identity and fashion. For research method, after research on fashion design process, design development was progressed according to the 4-phases that comprehends processes previous researchers presented. First, in the problem recognition phase, background on the introduction of Taekuki to products and Taekuki fashion during 2002 World Cup was analyzed. Then, the need and possibility of fashion product development applying Taekuki's formative characteristics were found. Second, in research and analysis phase, meaning and history of Taekuki as well as flag fashion product developments in the U.S. and England examples were reviewed. Also, individual interviews with experts and consumers were conducted to collect qualitative data regarding product and design direction. Third, in idealization for problem solving phase, 62 designs including 43 apparels and 19 accessories were emerged. Finally, in evaluation phase, 40 university students majoring design evaluated designs' creativity, function, uniqueness, symbol, aesthetics, and harmony. Through this research, it is expected that fashion products applying Taekuki will be formly established as a fashion item. Furthermore, it is also expected that product development in other categories, brand planning, and product development using other national symbols such as name, anthem, and flower will be followed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.264-278
• /
• 2018

The support structure of an optical mirror system is the one of the important design elements because the one affects the optical aberrations of the mirror surface. In this paper, Lagrange equation of the moving body of the fast steering mirror system(FSM) has been formulated to use with optimization design. Major goals for optimization are to assign the reasonably flexible stiffness to the structure and to enhance the first natural frequency of the mirror and support system in aid of more affordable control bandwidth for the FSM. Pursuing these purposes with the proposed method, the finite element analysis(FEA), optimization technique and the Zernike polynomial estimation are used for the design effects. It is concluded that the proposed approach for design well guides toward the desired design goals with regards to both structural and optical performances.

• Korean Institute of Interior Design Journal
• /
• no.39
• /
• pp.54-61
• /
• 2003

The purpose of this paper was to study interior design research trend through categorizing the research in interior design process and investigating the research method used at each stage of the process. The ultimate aim was to evaluate the relationship of design process and interior design research and to indicate the guide line of future research. As results of the study, interior design research did not reflect recently increasing renovation and remodeling trend since evaluation research was less performed than data collection, program and design development research. Only educational/research space showed higher rate in evaluation research. In recent years, interior design research is interested in objective design problem solving since programming research Increased, and in user-participation planning since questionnaire and interview research Increased as data collection method. For the future research, it is expected researchers to show creative thinking process on the stage of design development and to develop various research method on the stage of evaluation.

• Science of Emotion and Sensibility
• /
• v.23 no.1
• /
• pp.57-68
• /
• 2020

This research investigates how digital design agencies and client companies incorporate design thinking-a human-centered approach to solving difficult problems-into their website development processes. Based on a literature review on the design-thinking-driven web development process, multiple case studies of award-winning website projects were performed by in-depth interviews with key practitioners. Through analyses of these cases, their user-centered approaches for website innovation were identified according to the following four phases: web planning (discovery and defining phases) and web design and development (development and delivery phases). Moreover, distinct approaches of design thinking practices were identified according to two website types: a brand promotion website with a killer brand storytelling approach; and a service channel website with a strategic UI/UX-driven approach. Next, the key success drivers of these website projects were suggested in light of the typical themes of design thinking (i.e., human centeredness, research based, context awareness, and collaboration). Some practical limitations were also found in adopting the design-thinking-driven web development process, such as limited research methods and tools, and insufficient prototyping and experimentation. Along with these limitations, it was also discovered that current digital design agencies still face the following challenges in adopting the design-thinking-driven web development process: building a long-term, playful partnership with clients; leveraging decision-makers' design thinking awareness; and coping with limited resources (design thinking practitioners, budgets, and schedules).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.771-778
• /
• 2015

In this paper, we have proposed a design method for standardization of weapon information exchange between a weapon control computer of guided missile system and a high echelon command and control system. Because the weapon control computer based on diverse combat platforms is operated with several kinds of a high echelon system, it is necessary to provide a standardized design method for weapon information exchange between mutual system. In fact, it is possible to standardize a interface design specification of weapon information message because weapon information message is closely related to standard tactical data link message. It is essential that the interface design specification of weapon information is submitted to that of tactical data link information. It seems that this interface design specification is very useful in development process of the future weapon system.

• International Journal of Quality Innovation
• /
• v.10 no.1
• /
• pp.89-105
• /
• 2009

This study aims to probe into the influence of new product design and new product development process management on development performance. The research finding demonstrates that product design reveals positive and significant influence on new product development performance. Through statistical analysis, this study finds that companies in Taiwan value new product design. When companies value it more, they tend to have better new product development performance. With regard to the relation between new product development process management and new product development performance, the empirical results demonstrate that companies would pay more attention on new product development process management. With regard to new product idea and assessment, concept design and development, product function test and mass production in the market, through statistical analysis, this study finds that companies that value process management of new product development tend to have better new product development performance. As to the influence of new product design and new product process management on new product development performance, statistical analysis result demonstrates that the integration between new product design valued by companies in Taiwan and development process management would lead to significantly positive influence on new product development performance of the companies.

• Journal of Fashion Business
• /
• v.23 no.3
• /
• pp.1-9
• /
• 2019

The purpose of this study was to develop questions for fashion design development, by applying 7 elements of the scamper to the fashion design elements, and to present a scamper checklist of fashion design elements, and item structures. In this study, the scope of research was limited to clothing design among various fashion products, and among various design development stages. Fashion design development focusing on design sketching, was limited to the research scope. The research method was based on an empirical study that derived scamper questions through FGI (Focus Group Interview), consisting of 5 fashion experts. Fashion design elements applied to development of scamper questions consisted of silhouettes, constructive lines, structural details, decorative details, patterns and textures of fabrics, and item structures, derived by applying these elements to the individual 7 elements of the scamper: substitute, combine, adjust, modify, put to other uses, eliminate, and reverse. Results of the study included 7 questions for substituting, 8 questions for combining, 6 questions for applying, 15 questions for modifying, 4 questions for putting to other uses, 4 questions for eliminating, and 7 questions for reversal. The scamper checklist for fashion design elements and item structures drew to 5 lists of silhouette variations, 7 lists of constructive line variations, 11 lists of structural detail variations, 10 lists of decorative detail variations, 11 lists of fabric variations, and 9 lists of structural modifications of items.

• Journal of the Korea Furniture Society
• /
• v.14 no.2
• /
• pp.41-51
• /
• 2003

With rapidly changing modem information technology, the structure of our lifestyle has underwent much changes in our society. One of these changes is an immense distribution of computer desks, which became necessities of life in various organizations, companies and public offices as well as at home. Therefore, many companies are faced with the necessity of bringing about a new product with esthetic needs and new functions and come to have opportunities to make profits from top-quality products based on competitive design development. The academic design support program in collaboration with industry can provide design-related industry with a design assistance for a new product development, in addition, it can give to the professional faculty of the college the chances to contribute to advancement of design industry of the nation. To accomplish the need and purpose of this research, the design development of unified computer desks was carried out with the introduction of life-long Universal design concept named ‘Design For All.’ The theoretical background of this study researched all the literature on the terms definition of a computer desk, the concept and definition of Universal design and design support program in collaboration with industry and performed data analyses for a product development through an analysis of domestic products and a benchmarking of foreign products. On the basis of these theoretical background and analysis results, this research brought out a new product through designing processes and the information of this production could be utilized via the feedback of a new product. That is, this research was done for a practical use.