• 대한환경공학회지
• /
• 제31권1호
• /
• pp.51-57
• /
• 2009

역삼투 해수담수화(SWRO)공정의 큰 문제점 중 하나인 biofouling 현상을 초기에 감지하기 위한 센서 개발의 선행 연구로써, 본 연구는 역삼투막에 바이오필름을 형성하는 문제성 있는 박테리아를 센서의 타겟 박테리아로 제시하는 것에 중점을 두었다. 문헌조사와 실제 해수담수화 공정에서 사용된 해수 원수와 오염된 역삼투막에 존재하는 박테리아를 계통발생학적으로 분석한 결과를 토대로 Bacillus sp., Flavobacterium sp., Mycobacterium sp., P. aeruginosa, P. fluorescens, 그리고 Rhodobacter sp.의 여섯종의 모델 박테리아를 선정하였고, 선정된 모델 박테리아 중, 막 오염 잠재력을 가진 종을 찾아내기 위해 각각 박테리아의 역삼투막 부착 능력, 고압내성, 그리고 소수성을 비교 분석하였다. 그 결과, 역삼투막 부착능력은 Rhodobacter sp.와 Mycobacterium sp.가 뛰어났으며 소수성이거나 역삼투막(접촉각 약 $63^{\circ}$)과 비슷한 접촉각을 가진 박테리아가 역삼투막에 잘 부착하였다. 800 psi의 고압을 적용 한 후, Rhodobacter sp.는 여섯 종류의 모델 박테리아 중 59-73%의 가장 큰 개체수의 감소를 보였고, P. fluorescens는 1-29%로 가장 높은 고압내성을 보였다. 부착, 소수성, 고압내성 특성을 통한 역삼투막에 biofouling을 유발하는 영향력 있는 박테리아 선정 실험 결과, 여섯 종류의 모델 박테리아 중 Mycobacterium sp.가 부착 능력이 뛰어나고 높은 소수성 특성을 가지며, 800 psi의 고압에서도 50% 이상의 cell의 생물학적 활성능력을 가지고 있어, 막 오염을 유발시키는 가장 잠재력 있는 박테리아로 분석되었다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권4호
• /
• pp.249-255
• /
• 2015

이온 및 분자 이송제어를 위한 기능성 나노채널의 구현을 통하여 이온/분자의 상대적 크기에 의존하는 기존 분리 및 이송 기술의 선택효율, 투과도, 에너지 소비 측면에서의 기존 분리 기술의 한계를 극복하기 위한 새로운 개념의 분리 기술을 제시 하고자 하였다. 이를 위해 나노채널 플랫폼 가공 기술 개발, 나노채널 표면 기능화 기술 개발 등의 연구를 수행하였으며, 나노채널에 대한 전압인가 및 유량 조절이 가능한 이온이송제어 측정 시스템을 제작하고, 다층 금속 멤브레인을 이용하여 선택적으로 특정 이온($Cl^-$)의 이송을 95% 이상 차단하였다. 본 연구를 통하여 세포막에 존재하며 물분자만을 매우 효율적으로 투과시키는 채널인 아쿠아포린의 기능 및 특성을 모방한 신개념의 분리기술 구현을 위한 기반 기술 개발을 수행하였으며, 향후 지속적인 연구를 통하여 차세대 정수/담수, 휴대형 인공신장, 인공 감각 기관 등의 핵심 기반 기술이 될 것으로 예상한다.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.285-291
• /
• 2011

Membrane fouling is an unavoidable phenomenon and major obstacle in the economic and efficient operation under sea water reverse osmosis (SWRO). When fouling occurs on the membrane surface, the permeate quantity and quality decrease, the trans-membrane pressure (TMP) and operation costs increase, and the membrane may be damaged. Therefore, chemical cleaning process is important to prevent permeate flow from decreasing in RO membrane filtration process. This study focused on proper chemical cleaning condition for Shuaibah RO plant in Saudi Arabia. Several chemical agents were used for chemical cleaning at different contact time and concentrations of chemicals. Also autopsy analysis was performed using LOI, FT-IR, FEEM, SEM and EDX for assessment of fouling. Specially, FEEM analysis method was thought as analyzing and evaluating tool available for selection of the first applied chemical cleaning dose to predict potential organic fouling. Also, cleaning time should be considered by the condition of RO membrane process since the cleaning time depends on the membrane fouling rate. If the fouling exceeds chemical cleaning guideline, to perfectly remove the fouling, certainly, the chemical cleaning is increased with membrane fouling rate influenced by raw water properties, pre-treatment condition and the point of the chemical cleaning operation time. Also choice of cleaning chemicals applied firstly is important.

• Membrane and Water Treatment
• /
• 제9권4호
• /
• pp.221-231
• /
• 2018

A new procedure to produce poly(vinylidene fluoride)/boron nitride hybrid membrane is presented for application in membrane distillation (MD) process. The influence of hexagonal boron nitride (h-BN) incorporation on the performance of the polymeric membranes is studied through the present investigation. For this aim, h-BN nanopowders were successfully synthesized using the simple chemical vapor deposition (CVD) route and subsequent solvent treatments. The resulting h-BN nanosheets were blended with poly(vinylidene fluoride) (PVDF) solution. Then, the prepared composite solution was subjected to phase inversion process to obtain PVDF/h-BN hybrid membranes. Various examinations such as scanning electron microscopy (SEM), wettability, permeation flux, mechanical strength and liquid entry pressure (LEP) measurements are performed to evaluate the prepared membrane. Moreover, Air gap membrane distillation (AGMD) experiments were carried out to investigate the salt rejection performance and the durability of membranes. The results show that our hybrid PVDF/h-BN membrane presents higher water permeation flux (${\sim}18kg/m^2h$) compared to pristine PVDF membrane. In addition, the experimental data confirms that the prepared nanocomposite membrane is hydrophobic (water contact angle: ${\sim}103^{\circ}$), has a porous skin layer (>85%), as well competitive fouling resistance and operational durability. Furthermore, the total salt rejection efficiency was obtained for PVDF/h-BN membrane. The results prove that the novel PVDF/h-BN membrane can be easily synthesized and applied in MD process for salt rejection purposes.

• 상하수도학회지
• /
• 제24권1호
• /
• pp.93-101
• /
• 2010

Reverse osmosis (RO) membranes have been widely used for desalination as well as water and wastewater treatment facilities. Cleaning process is important to maintain stable operation as well as prevention of membrane fouling. Purpose of this research is to analyze electrostatistic and chemical characteristics after cleaning of RO membrane against $SiO_2$ scale. Four RO membranes of polyamide are used and examined about effect of chemical cleaning. EDTA (ethylene diamine tetraacetic acid) and SDS (sodium dodecil sulfate) and NaOH are applied for cleaning process after operation in synthetic water. Then, cleaning was performed with chemicals such concentration as 6hr, 12hr and 24hr, respectively. As a result, transmittances of FT-IR of four membranes are compared at each cleaning concentration. Ta/Tv shows difference of chemical composition between new membrane and cleaning membrane after cleaning. Type B of RO membrane is turned out to be most vulnerable to cleaning among four membranes. In terms of zeta potential, new membrane has -16 mV to +6 mV on pH while scaled membrane has -18 mV to 2 mV. However, it changed -23mV to 0.9 mV after cleaning. In comparison with existing salt rejection of RO membranes after cleaning, the rejection of the membranes goes down 0.7% maximum. Though cleaning changes the characteristics of membrane surface, it does not greatly affect salt rejection. pH is a critical factor to flux change in PA (polyamide) membrane.

• 한국유체기계학회 논문집
• /
• 제19권6호
• /
• pp.68-74
• /
• 2016

Hydraulic fracturing of wells during oil and gas (O&G) exploration consumes large volumes of fresh water and generates larger volumes of contaminated wastewater with high salinity. It is critical to treat and reuse the O&G wastewater in a cost-effective and environmentally sound manner for sustainable industrial development and for meeting stringent regulations. Recently, forward osmosis (FO) has been examined if it is a promising solution for treatment and desalination of complex industrial streams and especially fracturing flowback and produced waters. In the present study, the performances of a plate-and-frame FO membrane element and a module (6 elements combined in series) were investigated for concentrating high TDS wastewater. An FO module has achieved up to 64 % water recovery (i.e., concentration factor of 2.76) from 10,000 ppm wastewaters and can concentrate feed streams salinities to greater than 30,500 ppm.

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.341-353
• /
• 2016

Papermaking reconstituted tobacco is an important strategy for recycling the waste tobacco residues. To indentify the influences of the inorganic components on harmful components delivery in cigarette smoke, a self-made electrodialysis stack was assembled to desalt the tobacco extract. The influences of the applied current and extract content on the removal rate of the inorganic ions were investigated. Results indicated that the applied current was a dominant impact on the desalination performance. High currents lower than the limiting current density could accelerate the desalting efficiency but cause higher energy consumption. A current of 2 A, or current density of ${\sim}11mA{\cdot}cm^{-2}$, was an optimal choice by considering both the energy consumption and desalting efficiency. A 20% tobacco extract was an appropriate content for the electrodialysis process. More than 90% of inorganic ions could be removed under the optimum condition. The preliminary result indicated that removal of inorganic components was beneficial to decrease the harmful component delivery in cigarette smoke. Naturally, ED is an environmentally friendly and high-effective technology for desalting the tobacco extract.

• 한국레이저가공학회지
• /
• 제14권1호
• /
• pp.19-24
• /
• 2011

This work reports the results for laser shock peening of duplex stainless steel (22% Chromium - 5% Nickel) using a pulsed Nd:YAG laser (wavelength = 532nm, pulse width = 8ns). for the application to high-capacity pumps for seawater desalination plants. By properly selecting the process parameters such as laser intensity of 10GW/$cm^2$, laser pulse density of 75pulse/$mm^2$, and $100{\mu}m$ thick aluminum foil as an absorbent coating layer, the surface hardness of duplex stainless steel could be enhanced by 26%, from 256HV to 323HV with little changes in surface morphology and roughness. The depth of laser shock peened layer was measured to be around 2mm. The large enhancement of surface hardness is considered to have high practical importance in minimizing abrasive and corrosive deterioration of pump parts.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.139-147
• /
• 2014

Forecasting salinity in an estuary reservoir is essential to promise irrigation water for the reclaimed land. The objective of the research was to assess salinity balance and its temporal and spatial variations in the Iwon estuary reservoir which has been issued by its high contents of salinity in spite of desalination process for four years. Seepage flows through the see dikes which could be one of possible reason of high salinity level of the reservoir was calculated based on the salinity balance in the reservoir, and used as input data for salinity modeling. A three-dimensional hydrodynamic model, Environmental Fluid Dynamics Code (EFDC), was used to simulate salinity level in the reservoir. The model was calibrated and validated based on weekly or biweekly observed salinity data from 2006 to 2010 in four different locations in the reservoir. The values of $R^2$, RMSE and RMAE between simulated and observed salinity were calculated as 0.70, 2.16 dS/m, and 1.72 dS/m for calibration period, and 0.89, 1.15 dS/m, and 0.89 dS/m for validation period, respectively, showing that simulation results was generally consistent with the observation data.

• Carbon letters
• /
• 제15권1호
• /
• pp.38-44
• /
• 2014

This paper reports the effect of adding reduced graphene oxide (RGO) as a conductive material to the composition of an electrode for capacitive deionization (CDI), a process to remove salt from water using ionic adsorption and desorption driven by external applied voltage. RGO can be synthesized in an inexpensive way by the reduction and exfoliation of GO, and removing the oxygen-containing groups and recovering a conjugated structure. GO powder can be obtained from the modification of Hummers method and reduced into RGO using a thermal method. The physical and electrochemical characteristics of RGO material were evaluated and its desalination performance was tested with a CDI unit cell with a potentiostat and conductivity meter, by varying the applied voltage and feed rate of the salt solution. The performance of RGO was compared to graphite as a conductive material in a CDI electrode. The result showed RGO can increase the capacitance, reduce the equivalent series resistance, and improve the electrosorption capacity of CDI electrode.