• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.4
• /
• pp.246-251
• /
• 2012

Purpose: The purpose of the study is to evaluate the effectiveness of anterior segmental osteotomy (ASO) in bimaxillary protrusion (BP) patients by comparison between the mandibular soft and hard tissue changes from orthodontic treatment and ASO. Methods: All 44 patients were diagnosed with BP in Kyung-Hee Medical Center. Orthodontic treatment with teeth extractions were underwent by 23 patients (Group A) and 21 patients underwent ASO (Group B). Mandibular soft and hard tissue changes were measured and evaluated, which were based on the vertical and horizontal reference line in lateral cephalometric radiographs. Statistical significance between the changes and correlation between each measurement were analyzed. Results: The amount of B point movement was lesser than that of the lower incisal tip (LIT) retraction, and LIT was tilted lingually in group A. The posterior movement discrepancy between LIT and B point was insignificant, and the inclination of lower incisor was not changed in group B. The soft tissues, including the lower lip, showed a posterior movement and reduction in the depth of mento-labial groove. According to the correlation analysis, the movement of the lower incisor was significantly related to the movement of the lower lip in group A, and the movement of the lower incisor was significantly related to that of the movement of lower lip, B point and Pog in group B. Conclusion: The orthodontic treatment in BP patients results in posterior tilting movement of the lower incisor, but ASO results in the bodily movement of the lower incisor. Consequently, ASO is more effective in BP cases because it ensures the controlled movement of the lower incisors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.298-307
• /
• 2003

The purpose of this study was to investigate the distribution and differences of the cephalometric measurements between normal occlusion and the class III malocclusion. Kim's analysis was achieved and compared on both the 141 elementary school students with proper profile and normal occlusion and the class III malocclusion group at the age of 7 to 9, in Gwang-ju area and the results were as follows; 1. The ODI, APDI, IIA, UL showed statistically significant differences between normal occlusion and class III malocclusion(p<0.01). But, no significant difference existed in both CF and EI. 2. The mean value of ODI was 72.62, APDI 80.47 IIA 121.37 in normal occlusion. 3. The mean value of ODI was 64.45, APDI 87.31 IIA 129.89 in class III malocclusion. 4. ODI decreased as APDI increased, and the correlation coefficient was -0.576 in both normal occlusion and class III malocclusion. 5. The correlation coefficient related to EI was CF 0.777, LL -0.670, UL -0.588, IIA 0.485. It means that UL and LL were very sensitively reflected on EI.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.684-692
• /
• 2007

The object of this study is to identify the factors that is making and promoting cooperation for the unified forest fire administration, and then introduce cooperation process and cooperation manual for an effective forest management. For this purpose, the case studies were carried about "The East Coastal Forest Fire Administration Center" and "The Forest Fire Administration Center in Mt. Jiri Area" to have obtained excellent results by cooperation among administrative districts, and cooperative factors were extracted through analyzing each steps. That is, cooperation steps were divided into 4 steps of Initiation, Planning, Implementation, Benefiting, and in-depth interview and questionnaires were carried for extracting cooperation factors by each step for the unified cooperative forest management system. And with AHP analysis, essential four factors were extracted by each step based on priority order. Finally with the base of the essential 4 factors by each step, the cooperation process and manual appliable to forestry cooperation project were developed. This will be a guideline in order to achieve successful forest administrations through the cooperation among local administrative governments.

• Informatization Policy
• /
• v.23 no.3
• /
• pp.26-42
• /
• 2016

Recently, with the rapid growth of the O2O market, Fintech combining the finance and ICT technology is drawing attention as innovation to lead "O2O of finance", along with Fintech-based payment, authentication, security technology and related services. For new technology industries such as Fintech, technical sources, related systems and regulations are important but previous studies on Fintech lack in-depth research about systems and technological trends of the domestic Fintech industry. Therefore, this study aims to analyze domestic Fintech trends and find the insights for the direction of technology and systems of the future domestic Fintech industry by comparing Kakao Pay and Samsung Pay, the two domestic representative mobile payment services. By conducting a complete enumeration survey about the tweets mentioning Fintech until June 2016, this study visualized topics extraction, sensitivity analysis and keyword analyses. According to the analysis results, it was found that various topics have been created in the technologies and systems between 2014 and 2016 and different keywords and reactions were extracted between topics of Samsung Pay based on "devices" such as Galaxy and Kakao Pay based on "service" such as KakaoTalk. This study contributes to analyzing the unstructured data of social media by period by using social media mining and quantifying the expectations and reactions of consumers to services through the sentiment analysis. It is expected to be the foundation of Fintech industry development by presenting a strategic direction to Fintech related practitioners.

• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.337-350
• /
• 2010

This study conducted sedimentological and geophysical surveys for 3 years (2006-2008) in southern Gyeonggi Bay, Korea to elucidate temporal changes in subaqueous dune morphology on a sand ridge trending northeast to southwest that has been excavated by marine sand mining. The sand ridge (~20 m in height, ~2 km in width and 3~4 km in length) has a steep slope on the NW side and a gentle slope on the SE side, creating an asymmetric profile. Large (10~100 m in length) and very large (>100 m in length) dunes occurring on the SE side of the ridge show a northeastward asymmetrical shape, whereas dunes on the NW side destroyed by marine sand mining display a southwestward asymmetry. The comparison between Flemming (1988)'s correlation and the height-length correlation of this study indicates that tidal current and availability of sand sediment are major controlling factors to the development and maintenance of dunes. Depth and sedimentary characteristics (grain size) are not likely to be major controlling factors, but indirectly influence dune growth by hydrological and sedimentary processes. The length and the height of dunes decrease toward the southeastern trough away from the crest of the ridge. These features result from the decrease of tidal current and sediment availability. The length and the height of dunes on the southeast side decrease gradually over time. This is a result of the interaction between tidal current and the decrease in sediment availability due to sediment extraction by marine sand mining. Marine sand mining has destroyed the dunes directly, causing irregular shapes of shorter length and lower height. The coarse fraction of suspended sediments is transported and deposited very close to the sand pit. By contrast, relatively fine sediments are transported by the tidal current and deposited over a wide range by the settling-lag effect, resulting in a decrease of sediment grain size in the area where suspended sediments are deposited. In addition, marine sand mining, decreases the height of dunes. Therefore, morphological and sedimentological characteristics of dunes around the sand pits will be significantly changed by future sand mining activities.

• Tunnel and Underground Space
• /
• v.24 no.4
• /
• pp.297-307
• /
• 2014

Cavern Thermal Energy Storage system stores thermal energy in caverns to recover industrial waste heat or avoid the sporadic characteristics of renewable-energy resources, and its advantages include high injection-and-extraction powers and the flexibility in selecting a storage medium. In the present study, the structural stability of rock mass pillar between these silo-type storage caverns was assessed using a coupled thermal-mechanical model in $FLAC^{3D}$. The results of numerical simulations showed that thermal stresses due to long-term storage depended on pillar width and had significant effect on the pillar stability. A sensitivity analysis of main factors indicated that the influence on the pillar stability increased in the order cavern depth < pillar width < in situ condition. It was suggested that two identical caverns should be separated by at least one diameter of the cavern and small-diameter shaft neighboring the cavern should be separated by more than half of the cavern diameter. Meanwhile, when the line of centers of two caverns was parallel to the direction of maximum horizontal principal stress, the shielding effect of the caverns could minimize an adverse effect caused by a large horizontal stress.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.3 s.43
• /
• pp.400-411
• /
• 1993

The aim of this study is to analyze the variations among hospitals and hospital groups in resource use and procedures of diagnostic and therapeutic process, such as laboratory tests, radiologic examinations, tissue diagnosis, timing of surgery after admission, the time required for operation. The study was performed for five procedures including cesarean section (C/S), appendectomy, cholecystectomy, cataract extraction, and pediatric pneumonia. The 2,316 subjects were selected from medical insurance claims list, and from this list 413 cases were sampled for medical record review. The patterns of resource utilization and process of treatment were described according to hospitals and characteristics of hospital groups. The major results were as follows : 1. The numbers of laboratory and radiologic tests showed significant difference among hospitals and hospital groups. In case of hospital groups, we could find tendencies of more tests with increasing hospital bed size. 2. In general, the proportion of operative cases evaluated by tissue diagnosis postoperatively among all operations ranged from 28.3% to 100%. The proportion varied among hospital groups, of which general hospital A group(more than 15 specialty) showed the highest proportion. 3. Post-admission delay until operation and the time required for operative procedure were not invariable among hospitals and hospital groups. The duration of operation in tertiary hospitals was slightly shorter than general hospitals, with varying statistical significance. We could find that probably there were differences of quality among hospitals in some components of procedures, which suggested that the implementation of quality assurance activities would be mandatory. In this study, we simply described the patterns of resource utilization and some features of clinical process, with institution of the need for advanced studies with in-depth analyses for each component of diagnosis and treatment procedures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.345-352
• /
• 2020

To preserve and restore tidal flats and prevent safety accidents, it is necessary to construct tidal flat topographic information including the exact location and shape of tidal creeks. In the tidal flats where the field surveying is difficult to apply, airborne LiDAR surveying can provide accurate terrain data for a wide area. On the other hand, we can economically obtain relatively high-resolution data from UAV (Unmanned Aerial Vehicle) surveying. In this study, we proposed the methodology to generate high-resolution topographic information of tidal flats effectively by integrating airborne LiDAR and UAV point clouds. For the purpose, automatic ICP (Iterative Closest Points) registration between two different datasets was conducted and tidal creeks were extracted by applying CSF (Cloth Simulation Filtering) algorithm. Then, we integrated high-density UAV data for tidal creeks and airborne LiDAR data for flat grounds. DEM (Digital Elevation Model) and tidal flat area and depth were generated from the integrated data to construct high-resolution topographic information for large-scale tidal flat map creation. As a result, UAV data was registered without GCP (Ground Control Point), and integrated data including detailed topographic information of tidal creeks with a relatively small data size was generated.

• Journal of Service Research and Studies
• /
• v.5 no.1
• /
• pp.17-33
• /
• 2015

This study looked for employment services satisfaction surveys done in the UK, USA and Korea. And through which derived the following suggestions for improving Korea the employment service satisfaction survey. First, in terms of research design improvements to ensure the representativeness of the sample region for each center and branch-specific (job seekers and recruiters) requires the sampling design based on user scale. In addition, the sample design should be applied when considering specific user can be distributed. US is restricted to participants within 60 days for sampling and sample extraction once a month at least. Next in terms of survey improvements, it is necessary to apply a weighting part considering the regional characteristics. For this, the correct analysis of the employment center by the internal and external environment is required. And in the case of non-face-to-face service, complaints about worknet use is likely to be channeled into complaints about job centers provide services. It needs to improve on this. And for the improvements of business processes service by an in-depth study, it can be seen to review the possible introduction of a British mystery shopper.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.1
• /
• pp.58-64
• /
• 2017

Construction Management (CM) is being utilized as an efficient project management system. Construction management system provide scientific management techniques as well as the expert's service with the expertise. Accordingly, CM services demand is continuously increasing in construction project. Construction Management engineer grade is distinguished by the Index of Construction Engineer's Competency (ICEC). Construction management engineer requires a higher score than the other fields. However, junior grade CM engineer can get grade according to the education and qualification. This study was conducted junior grade CM engineer depth interview after analyzing the problem of the current CM engineer grade system. As a result, this study was to extracted the 23 kind competence factors. And, competence factors were five area grouped using affinity diagram method. Next, we analyzed the importance utilizing the Analytic Network Process (ANP) technique. As a result, high priority areas were analyzed to be quality and cost areas associated with project management.