• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.91-111
• /
• 1997

An aim of this study is to find out influenced factors of satisfaction degree on the clinical practice for the dental technology student and it can be provided the basic necessary data for the educational planning of the curriculum for the clinical practice. The target of study are selected form 7 junior health college students and colleges are located in around seoul form 14 junior health college throughout the nation. The questionnaries were distributed between 24th Feb to 30th July in 1997 to the 100 dental technicians who finished clinical practice and entered profession in 1997. All collected data were analysed by using SPSS/PC, Technical Statistic, One-Way ANOVA, Ttest, Person Correnlation Coefficient, Chrobach Alpha Coefficient and the result of the study is follow. 1) The satisfaction degree were classificated as 7 aspect and overall average score was 3.042. During that period satisfaction of personal relation aspect(M=3.737) shows highest level. Satsfiaction of clinical parctice(M=3.571) shows as second, Satisfiaction of environment(M=3.028), Satisfaction of guidance(M=2.915), satisfaction of subject are ordered of their scores. According to above study satisfaction's degree of subject show lowest level. 2) According to the result of verification of study. general character of student and satisfiaction degree has not much relation with sex, location of college, religion, period for enrolling college, teaching method of clinical practice. But the result show similar relation with following items. Satisfaction if subject and satisfaction of clinical practice(P=0.000), place of clinical practice and satisfaction of clinical practice(P=0.002), Academic record of college and satisfaction of clinical practice(P=0.000). 3) The relation of satisfaction(Subject, method of teaching, environment, period, rating, personal relation) of clinical practice and age of investigation's target Older student show higher satisfaction(P=0.040). Also method of teaching, environments, period, rating, personal relation has similarities with satisfaction. Therefore student who has higher satisfaction of clinical practice they also have higher rate for subject, environment, period, personal relation. 4) The result fo investigation, most interesting subject was crown & bridge and most difficult factor was too many simple-works to the student. One of ideal factor was discussing with counselor before they choose place for clinical practice. Third grade and first semester is most efficient time for clinical practice and 8 week is proper period for clinical practice. Clinical practice is absilutory mecessary and we find out most student rated positively. However we need more specific study about satisfcation of each subject. Because it shows lowest level and we need more pay attention for planning of clinical practice.

• Journal of Technologic Dentistry
• /
• v.18 no.1
• /
• pp.117-127
• /
• 1996

This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.

• Journal of Technologic Dentistry
• /
• v.20 no.1
• /
• pp.37-49
• /
• 1998

The specimens used were Ag-25 Pd-15 Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electric furnace and centrifugal casting machine in Ar atmosphere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age- hardening characteristics of the small Au-containing Ag-Pd-Cu dental alloys were investigated by means of hardness testing. X-ray diffraction and electron microscope observations, electrical resistance, ergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, i.e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the $L1_0$ type face-centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affected by the Cu concentration. In stage II, decomposition of the ${\alpha}$ solid solution to a PdCu ordered phase($L1_0$ type) and an Ag-rich ${\alpha}2$ phase occurred and a discontinuous precipitation occurred at the grain boundary. From the electron microscope study, it was conclued that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipetation procedure was ${\alpha}{\to}{\alpha}+{\alpha}_2+PdCu {\to}{\alpha}_1+{\alpha}_2+PdCu$ at Pd/Cu = 1.7 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.473-482
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution of the surrounding tissues according to 3 proximal plate types of the RPI clasp. Methods: The removeable partial denture which mandibular right and left second premolars and mandibular molars were lost was attached to a three dimensional photo elastic epoxy resin model. Then 120N of vertical load was applied. After 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns. Results: Kratochvil type guiding plane exhibited little uniform stress distribution on load center and alveolar ridge, but higher stress concentration on buccal surface of second premolar. Krol type guiding plane exhibited the stress concentration on the front of load center and relatively higher stress concentration on buccal surface of first premolar. However, this type had no effect on canine. Researcher type guiding plane showed the stress concentration on second premolar and molar, but the little stress distribution on first premolar. Conclusion: In all types, excessive stress concentration was appeared and three types were not significant different.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.79-85
• /
• 2007

In this study, We tried to find out the fracture strength of zirconia coping all ceramic crown and collarless porcelain fused gold alloy crown as the compared group. Each of the collarless porcelain fused gold crown and zirconia all ceramic crown has been produced specimen 10 each. And after pasting them on the steel jig, it had load given at porcelain incisal edge by 130$^{\circ}$ and measured fracture strength by Universal Testing Machine and then We have results from that. 1. The average value of fracture strength suggested 950.49 N at collarless porcelain fused gold alloy crown, 656.81 N at zirconia coping all ceramic crown. 2. Fractured pattern showed that the whole of labial part was exposed in collarless porcelain fused gold crown, but porcelain of margin part did not show fracture in advance. In the practice, the concern that collarless might cause fracture strength to be weaken does not matter, we concluded zirconia all ceramic crown made fracture that only a part of labial porcelain was fractured. The combination of zirconia all ceramic crown and turned out to be excellent.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.99-105
• /
• 2020

Purpose: A study analysed the stress distribution of abutment screw and supporting bone of fixture by the tightening torque force of the abutment screw within clinical treatment situation for the stability of the dental implant prosthesis. Methods: The finite element analysis was targeted to the mandibular molar crown model, and the implant was internal type 4.0 mm diameter, 10.0 mm length fixture and abutment screw and supporting bone. The occlusal surface was modeled in 4 cusps and loaded 100 N to the buccal cusps. The connection between the abutment and the fixture was achieved by combining three abutment tightening torque forces of 20, 25, and 30 Ncm. Results: The results showed that the maximum stress value of the supporting bone was found in the buccal cortical bone region of the fixture in all models. The von Mises stress value of each model showed 184.5 MPa at the 20 Ncm model, 195.3 MPa in the 25 Ncm model, and 216.5 MPa in the 30 Ncm model. The contact stress between the abutment and the abutment screw showed the stress value in the 20 Ncm model was 201.2 MPa, and the 245.5 MPa in the 25 Ncm model and 314.0 MPa in the 30 Ncm model. Conclusion: The increase of tightening force within the clinical range of the abutment screw of the implant dental prosthesis was found to have no problem with the stability of the supporting bone and the abutment screw.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.113-120
• /
• 1997

Candida albicans is now well recognized among the denture stomatitis patients. The broth macrodilution test is the most widely used technique for antifungal susceptibility testing. The purpose of this study was to determine the C. albicans carrier rate of the denture patients in Iksan, chonbuk. To determine the C. albicans carrier rate of denture patients, culture were made from 227 sample taken in Iksan, Chonbuk during July 1997 to August 1997. Also activities of amphotericin B and miconzole against isolates of denture patients of C. albicans were tested by broth macrodilution test using RPMI medium 1640. The results were as follows : First C. ablicans was isolated from 6.6% of denture patients samples and the frequency of isolation fo C. albicans was highest(50%) in the age group of 71-year-old to 80-year-old denture patients. Second, against C. albicans, the MIC range of amphotericn B was $0.06{\sim}0.25{\mu}g/ml$. MIC50 and MIC90 were $0.13{\mu}g/ml$ and $0.25{\mu}g/ml$, respectively. Third, the MIC range of miconazole was $10-{\ge}20{\mu}g/ml$ and MIC50 and MIC90 were $20{\mu}g/ml$ and ${\ge}20{\mu}g/ml$, respectively. It was concluded from this study that C. albicans acrriages from healthy denture individuals only over 60-year-old ages were isolated, they remain susceptible to amphotericin B and not rarely resistant to miconzole.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.917-919
• /
• 2011

본 연구는 보건직 종사자의 행동유형에 따른 직무만족 및 조직몰입, 직무스트레스를 파악하여 바람직한 행동패턴을 제시하고자 시도하였다. 연구방법 : 부산 및 울산광역시의 종합병원과 병의원에서 1년이상 근무한 보건직 종사자 240명 중 자료의 누락이 없는 184명을 최종 분석 대상으로 하였다. 자료의 분석은 SPSS WIN 18.0을 사용하여 대상자의 일반적 특성 및 업무환경적 특성은 실수와 백분율로 행동유형에 따른 조직몰입과 직무만족, 직무스트레스는 ANOVA로 분석하였다. 연구결과 : 보건직 종사자의 행동유형에 따른 직무만족, 조직몰입에는 유의한 차이가 없었으나, 직무 스트레스에는 유의한 차이가 있었다.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.187-194
• /
• 2020

This study surveyed the convergence of organizational culture, organizational structure, emotional labor on job satisfaction of dental workers and analyzed it with SPSS WIN18.0 program to obtain statistically significant results(p<.05). Organizational culture was high men, dental hygienist, university graduates, hospitals, many workers, High income. Organization structure was high hospitals, many workers. Emotional labor was high low age and career, single, drinking. Job satisfaction was high more than 10 workers, high income. There was a positive correlation between job satisfaction, organizational culture, organizational structure. The regression analysis showed that Y (job satisfaction) = .907 + .106 (organizational structure). Therefore, in order to enhance job satisfaction of dental workers, it is necessary to make an effort to form a positive organizational culture by considering variables related to organizational structure.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.310-316
• /
• 2012

A new method for early caries diagnosis was proposed and tested through a home-made optical examination system that used quantitative light fluorescence (QLF) and digital imaging fiber optic transillumination (FOTI) (DIFOTI), with light sources across a wide spectral range, from 350 nm to 1,000 nm. The front-illuminated infrared light scattering image (FIR) showed similar diagnostic abilities to that of DIFOTI. The FIR method was invented based on the observation that caries lesions lose the high transmittance and low scattering properties of benign enamel tissue. There are various methods for the early diagnosis of caries, such as visual examination, exploration, X-ray radiography, QLF, FOTI, and infrared fluorescence (diagnodent). Among them, methods based on optical properties are regarded as having the most potential. A comparative study was performed between the FOTI, QLF, diagnodent, optical coherence tomography, and FIR scattering image methods, using 20 extracted teeth samples with early caries. A scale of lesion measurement based on optical image contrast was proposed. The statistical analysis showed a significant correlation between the DIFOTI and FIR methods (r = 0.35, p < 0.05). However, the QLF and diagnodent methods showed little association with FIR images, as they have different detection principles as compared with FIR. Tomographic images obtained by OCT, using 1,330 nm super luminescent LED as a gold standard of tooth structure, verified that the FOTI and FIR results correctly represented the lack of homogeneity in dental tissue. The newly proposed FIR method attained similar diagnostic results to those of FOTI, but with an easier approach.