• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.213-223
• /
• 2007

The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. The adhesion between metal substructure and dental porcelain is related to the diffusion of oxygen to the reaction layer formed on cast-metal surface during firing. The purposed of this investigation was to study the effects of gold based bonding agent on Ni-Cr alloy-ceramic adhesion between porcelain matrix, gold based bonding agent and metal substructure interface. gold based bonding agent have been applied as an intermediate layer between a metal substructure and a ceramic coating. gold based bonding agent(Aurofilm NP, Metalor, Swiss) was applied on Ni-Cr alloy surface by four method. Surfaces only air abraded with 110${\beta}\neq$ Al2O3 particles were used as control. metal ceramic adhesion was evaluated by a biaxial flexure test(N=5) and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that the layering sequence of gold based bonding agent is very important and can improve porcelain adherence to PFM.

• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.151-160
• /
• 2002

The purpose of this study was to evaluate the influence of sprue joint form on castability in dental prosthetics. The researcher carried out experimental study according to the type was divided by sprue joint form. Therefore type A was made thicken than sprue diameter of type B and type C was made it conversely. The results were as follows: 1. In the order of castability, type C(87.8%) was first and then type A(87.0%) and type B(79.2%) was last. However there was no significant difference statistically. 2. If reservior was located at the correct position and in sufficient size, internal shrinkage porosity in the casting bodies were not generated in the type of all. 3. At the reservoir, internal shrinkage porosity was generated first in type A, followed by type Band type C in the order named. Although it gives no impact on casting body, porosity seems to appear the least when it's produced in the form of type C.

• Journal of Technologic Dentistry
• /
• v.35 no.2
• /
• pp.89-95
• /
• 2013

Purpose: The purpose of this study was to evaluate bond strength of Metal Disk alloy and casting alloy. Methods: Metal specimens were divided into 4 groups for each alloy. Three point flexural test were used to measure the bond strength of CAD/CAM metal alloy and casting alloy. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. As for the analysis methods, the study used Kruskal-Wallis test. Results: The average bonding strengths of Group 1 to porcelain was $36.7{\pm}9.90$ MPa, Group 2 to porcelain was $37.68{\pm}4.51$ MPa, Group 3 to porcelain was $36.43{\pm}6.57$ MPa, Group 4 to porcelain was $42.88{\pm}6.81$ MPa, Each group was not significantly different. Conclusion: Bond strength of Casting alloy is equal to or higher than bond strength of CAD/CAM Metal Disk alloy. Alloy clinical bond strength is 25 MPa, So CAD/CAM Metal Disk alloy can be used as dental material.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.9-21
• /
• 2007

This study was conducted to determine the cause and prevalence of occupational skin disease in dental technicians working in Seoul, Korea. and to investigate the relation between these work condition and skin disease of the hand, wrist and forearm. This study was based on the Nordic occupational skin questionnaire(NOSQ), a self-administrated questionnaire which was modified to investigate the dental technician's occupational factors in domestic circumstances. The number was distributed to 500 dental technicians who participated in annual continuing education for dental technicians of the Seoul metropolitan area in April 2006. Of the subjects, 62(30.4%) had eczema and 70(32.9%) had urticaria, as diagnosed. Of the subjects with the symptoms of urticaria, 30 complained of atopic dermatitis, 65 complained of allergic rhinitis, 56 complained of allergic conjunctivitis, and 18 complained of asthma. The group with atopic history had a higher frequency of eczema or urticaria than the group without atopic history. From multiple regression analysis, the group who had a history of atopic dermatitis also had high symptom rates of eczema. The group who had a history of allergic rhinitis and allergic conjunctivitis had high symptom rates of urticaria. The urticaria symptom rates were higher in those wearing gloves than those who did not for the type of work.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.157-164
• /
• 2012

Purpose: The purpose of this study was to survey periodontal status using oral health index in the elderly population and determine methods for improving oral health status. Methods: The date collected from 'The fifth korean national health and nutrition examination survey 2010' was analyzed in this study. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for windows. We determined frequencies and percentage, calculating means, and standard deviations, and determining statistical significance using logistic regression analysis, multiple regression analysis. Results: General characteristics showed differences in oral health behaviors associated with gender, age, residence, education. General characteristics showed differences in periodontal status associated with gender, family type, gender, residence, education. Oral health behaviors showed differences in periodontal status associated with using oral health care products, dental treatment. Conclusion: In conclusion, in order to improve oral health of the elderly, the importance and needs of periodontal status should be emphasized. periodontal status related education for the elderly should be operated.

• Journal of Technologic Dentistry
• /
• v.42 no.1
• /
• pp.45-53
• /
• 2020

Purpose: The purpose of this study was to investigate the current status and satisfaction of dental CAD/CAM system. Methods: A survey of dental technicians was conducted and a total of 353 responses were used for analysis. The satisfaction difference according to career was analyzed by ANOVA and tukey HSD (α = .05). Results: Satisfaction with the design program was 3.64 ± .86, the highest among all items. On the other hand, the satisfaction with price was 2.75 ± 1.02, which was the lowest. The difference according to career was statistically significant in the following items. Frequent breakdown, single crown margin, bridge crown margin, retentivity, price, A/S, equipment training (p<.05). Conclusion: As the materials applied to dental CAD/CAM are expanding and the types of prostheses are diversified, the use rate of CAD/CAM is continuously increasing. The dental CAD/CAM system will need to be improved in a way that will satisfy all patients, dentists and dental technicians.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.2
• /
• pp.147-163
• /
• 2009

This study was attempted in order to look into 'Assist work' as to Implant system which dental hygienists perform in a clinical field. Subjects of this research were 362 dental hygienists who work at general hospital, University hospital, dental hospital, and dental clinics located in Seoul, Kyeong-gi, In-chon, and Jeon-buk area. As to research tool, we produced questionnaire which was comprised of the total 25 items regarding 3 of general features (age, career of dental hygienist, and personality), 6 of implant system assist work, 3 of Informed consent before surgery, 6 of preoperative preparation and maintenance related business, and 7 items related to postoperative maintenance. By using SPSS program, collected data was analyzed. Results of analysis in this study were as follow; 1. As to implant related education, dental hygienists' experience of education was high as 77.7%, and the people who is needed more education was 86.3%. Consequently, dental hygienists' concern about the implant related education was very high. 2. It was observed that most of informed consent making approvement by announcement to the surgical operation was made by dental hygienist before implant as 95%. 3. Over 80% of dental hygienists performed acquisition of cleanliness technology, motivation, back up articles preparation, treatment area arrangement, and etc. which we can check by preoperative maintenance items. In particular, response about the motivation was very high as more than 90%. 4. When performing an operation, in the case of disinfecting finger was low for 53.9% and the method was mainly washing with drug solution, and gown sterilization was performed only in 52.2%. Therefore education regarding disinfection was urgently needed. 5. Significance of education could be known that answers of hygienists experienced education appeared highly in items of maintenance method and there was statistically significant difference(p<0.05). 6. In case that assist work were 21cases or greater, agitation measurement was the most many performed in 68.9% and difference was showed up significantly(p<0.001). 7. Evaluation about periodontal tissue was high in dental hygienists who had experienced education and also there was statistically significant difference. In conclusion, assist work of dental hygienists was very comprehensive when implant surgery was performed, and all of items excluding hand disinfection or gown disinfection were highly showed up in most of hygienists. However, since there is the limit that we didn't investigate the quality of performing contents. It is considered that further study regarding the content has to be progressed for supporting this result in the future.

• Journal of Technologic Dentistry
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2012

Purpose: The purpose of this study was to investigate the transmittance differences of pressable ceramic core due to thickness within the visible light spectrum. Methods: 36 specimens were divided into 2 groups (0.6mm, 0.8mm) which have each 3 specimens. The size of specimens was 10mm high and 10mm wide. The transmittance of specimens are measured by spectrophotometer Model Cary 500 that can measure infrared-ray, visible wave and ultraviolet-ray. Results: The results shows that there was no significant difference between specimen's thickness(0.6mm, 0.8mm) and transmittance. Conclusion: The individual's color perception is personal and there are numerous factors that influence on it. In general, human eye can perceive the color of thing only within visible light spectrum but in this experiment through spectrophotometer there was no big difference between specimen's thickness(0.6mm, 0.8mm) and transmittance. To sum up, The most important factors were a layed porcelain structure and its thickness rather than core thickness in the porcelain crown. Also, When making all ceramic core with dead pulp (nervous treatment tooth) when used as a restorative esthetic think is more efficient to improve.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.49-57
• /
• 2007

This study was to add crushed frit with different grain sizes to 3Y-TZP so that it could determine the mechanical properties depending on sintering temperature. In this study, 3 types specimens were prepared in powder with respective additions of 20wt.% frit, which was sized through 24-, 48- and 72-hour ball milling with zirconia. Then, sintered pellets were tested in experiments under the temperature variations for different compositions. As a result, this study came to the following findings: 1. It was found that the higher sintering temperature and the longer ball milling time of frit led to the higher sintered density. 2. Bending strength tended to increase with higher sintering temperature and longer ball milling time of frit. 3. Hardness tended to increase with higher sintering temperature and longer ball milling time of frit. 4. However, it was found that fracture toughness didn't vary significantly depending on sintering temperature. From these findings, it was concluded that the smaller frit grain size and the narrower particle size distribution of frit lead to the better mechanical properties.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.47-58
• /
• 2009

Self-leadership means a person's ability to make his thought or behavior in a right way by controlling it himself. Strategies of the same leadership can be largely categorized into three, behavior focused, natural reward and constructive thought strategies. In this study, the foresaid styles of self-leadership strategy are discussed from the perspective of dental lab laboratories' business environment of Gyeongnam region. And accordingly, this researcher examined such strategy styles that dental lab managers, chief technicians and assistant technicians usually have. Results of the study can be summarized as follows. First, out of the self-leadership strategy styles, most remarkably found among the professional of dental technology was constructive thought strategy, followed by behavior-focused and natural reward strategies in order. In general, therefore, the professionals strongly tend to make their thoughts that can a positive effect on their work performance or in a constructive way. In other words, professional dental technicians are more likely to make efforts to persuade or persuade themselves to change their own unreasonable confidence or negative process in more positive way. Second, the extent to which constructive thought strategy is perceived was not different among dental lab managers, chief technicians and assistant technicians. While, behavior-focused and natural reward strategies were found most strongly perceived by dental lab managers, followed by chief and assistant technicians in order. This may be attributed to the fact that the higher professional dental technicians are in position, the higher they are in self-leadership, or in the ability to overcome crises by themselves and make their thought or behavior in a right way. Dental lab managers usually have lots of experiences in relation to behavior-focused or natural reward strategy. Therefore, they are very strongly capable of controlling themselves in order to overcome crises or make their thought or behavior in a right way. In contrast, assistant technicians are still having lots of trials and errors because they are less experienced and skilled. This suggests that chief technicians should make themselves fully capable as a medium that connects between dental lab managers and assistant technicians.