• The Korean Journal of Physiology and Pharmacology
• /
• 제16권3호
• /
• pp.205-209
• /
• 2012

The objective of the present study was to establish the method of measurement of hydrogen peroxide and to estimate the anti-oxidative effect of genistein in the skin. UVB induced skin oxidation and anti-oxidative effect of genistein formulations were evaluated by determining levels of hydrogen peroxide. The mechanism involved in the determination of hydrogen peroxide is based on a color reaction between ferric ion ($Fe^{3+}$) and xylenol orange, often called FOX assay and subsequent monitoring of absorbance values of the reactant at 540 nm. The reaction was to some extent pH-dependent and detection sensitivity was greatest at pH 1.75. Genistein liposomal gel demonstrated better anti-oxidative effect with regard to lowering hydrogen peroxide levels elevated by UVB irradiation compared to genistein-suspended gel. A linear relationship has been observed between anti-oxidative effect of genistein and drug deposition in the skin tissue. Genistein liposomal gel resulting in the localization of the drug in the deeper skin led to improved anti-oxidative effect compared to genistein gel. The suggested method for evaluation of oxidation of the skin can be used as a tool to screen effective anti-oxidative agents and their delivery systems acting on the skin.

• Tribology and Lubricants
• /
• 제21권3호
• /
• pp.107-113
• /
• 2005

Micro/nano adhesion and friction properties of self-assembled monolayers (SAMs) with different head- and end-group were experimentally studied according to the coating methods. Various kinds of SAM having different spacer chains (C10 and C18), head-group and end-group were deposited onto Si-wafer by dipping and chemical vapour deposition (CVD) methods under atmospheric pressure, where the deposited SAM resulted in the hydrophobic nature. The adhesion and friction properties between tip and SAM surfaces under nano scale applied load were measured using an atomic force microscope (AFM) and also those under micro scale applied load were measured using a ball-on-flat type micro-tribotester. Surface roughness and water contact angles were measured with SPM (scanning probe microscope) and contact anglemeter respectively. Results showed that water contact angles of SAMs with the end-group of fluorine show higher relatively than those of hydrogen. SAMs with the end-group of fluorine show lower nano-adhesion but higher micro/nanofriction than those with hydrogen. Water contact angles of SAMs coated by CVD method show high values compared to those by dipping method. SAMs coated by CVD method show the increase of nano-adhesion but the decrease of nano-friction. Nano-adhesion and friction mechanism of SAMs with different end-group was proposed in a view of size of fluorocarbon molecule.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.168-168
• /
• 2000

Yamada 등의 덩어리 증착에 관한 연구 이후 낮은 기판 온도에서 결정성이 뛰어난 금속박막성장(thin film growth)을 얻을 수 있는 방법으로 최근 덩어리 증착(cluster depositon) 방법에 관하여 많은 연구들이 진행되어 덩어리 충돌이 원자 충돌인 경우와 큰 차이를 보이는 결과를 얻었으며, 덩어리 증착시 기판 내부에 점결함(point defect)이 발생되지 않는다는 중요한 결과를 얻었다. 금속 덩어리를 사용한 금속박막성장은 높은 박막성장속도와 뛰어난 구조 재배열 효과를 얻을 수 있으며 기판의 격자 손상을 감소시키기 때문에 향후 나노미터 소자 개발에 응용성이 클 것으로 예상된다. 그러나 금속 덩어리와 금속 표면사이의 상호작용에서 발생되는 기본적인 역학(mechanism)은 분명하게 알려져 있지 않다. 지금까지 알루미늄 덩어리의 원자구조와 특성에 관한 연구는 수행되어졌지만 (4,5), 알루미늄 덩어리 증착에 관한 연구는 수행되지 않았다. 본 연구에서는 13~177개로 이루어진 큰 알루미늄 덩어리들의 증착에 관하여 Md(molecular dynamics) 방법을 사용하여 연구하였다. MD 시뮬레이션을 사용하여 덩어리 증착시 기판 표면과의 충돌 초기에 나타나는 덩어리 내부 원자들의 상관충돌효과(correlated collisions effect)에 의하여 덩어리 크기에 따른 증착현상과 여러 물리적 현상들을 관찰하였다. 덩어리 총 에너지가 증가할수록 기판의 최고 온도는 증가하며, 덩어리 크기가 클수록 상관충돌효과가 커지기 때문에 덩어리의 총 에너지에 다른 최고 증가 비율은 적어졌다. 시간에 따른 비정렬 원자수(disordered atom number) 비교를 통하여 덩어리가 클수록 구조 재배열이 더 잘 이루어진다는 것을 알 수 있었고, 원자당 에너지가 클수록 덩어리 원자들이 기판 내부로 더 깊이 들어갔고, 덩어리 크기가 클수록 상관충돌효과로 인하여 덩어리 원자들이 기판 내부로 더 깊이 들어가는 것을 알 수 있었고, 덩어리 크기가 클수록 상관충돌효과는 커지고 더욱 부드러운 증착이 이루어졌으며, 무엇보다도 덩어리 증착시 표면에서 구조 재배열이 잘 이루어지는 특징을 살펴볼 수 있었다. 이러한 알루미늄 덩어리를 생성하여 증착할 수 있을 경우, 뛰어난 재배열 효과를 이용하여 품질이 향상된 반도체 소자를 제조할 수 있을 것으로 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.141-141
• /
• 2010

The effect of thermal anneal on the characteristics of structural properties and the enhancement of luminescence and photovoltaic (PV) characteristics of silicon-rich silicon-nitride films were investigated. By using an ultra high vacuum ion beam sputtering deposition, B-doped silicon-rich silicon-nitride (SRSN) thin films, with excess silicon content of 15 at. %, on P-doped (n-type) Si substrate was fabricated, sputtering a highly B doped Si wafer with a BN chip by N plasma. In order to examine the influence of thermal anneal, films were then annealed at different temperature up to $1100^{\circ}C$ under $N_2$ environment. Raman, X-ray diffraction, and X-ray photoemission spectroscopy did not show any reliable evidence of amorphous or crystalline Si clusters allowing us concluding that nearly no Si nano-cluster could be formed through the precipitation of excess Si from SRSN matrix during thermal anneal. Instead, results of Fourier transform infrared and X-ray photoemission spectroscopy clearly indicated that defective, amorphous Si-N matrix of films was changed to be well-ordered thanks to high temperature anneal. The measurement of spectral ellipsometry in UV-visible range was carried out and we found that the optical absorption edge of film was shifted to higher energy as the anneal temperature increased as the results of thermal anneal induced formation of $Si_3N_4$-like matrix. These are consistent with the observation that higher visible photoluminescence, which is likely due to the presence of Si-N bonds, from anneals at higher temperature. Based on these films, PV cells were fabricated by the formation of front/back metal electrodes. For all cells, typical I-V characteristic of p-n diode junction was observed. We also tried to measure PV properties using a solar-simulator and confirmed successful operation of PV devices. Carrier transport mechanism depending on anneal temperature and the implication of PV cells based on SRSN films were also discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.77.1-77.1
• /
• 2013

Atomic layer deposition (ALD) is known for its self-limiting reaction, which offers atomic-level controllability of the growth of thin films for a wide range of applications. The self-limiting mechanism leads to very useful properties, such as excellent uniformity over a large area and superior conformality on complex structures. These unique features of ALD provide promising opportunities for future electronics. Although the ALD of Al2O3 film (using trimethyl-aluminum and water as a metal precursor and oxygen source, respectively) can be regarded as a representative example of an ideal ALD based on the completely self-limiting reaction, there are many cases deviating from the ideal ALD reaction in recently developed ALD processes. The nonconventional aspects of the ALD reactions may strongly influence the various properties of the functional materials grown by ALD, and the lack of comprehension of these aspects has made ALD difficult to control. In this respect, several dominant factors that complicate ALD reactions, including the types of metal precursors, non-metal precursors (oxygen sources or reducing agents), and substrates, will be discussed in this presentation. Several functional materials for future electronics, such as higher-k dielectrics (TiO2, SrTiO3) for DRAM application, and resistive switching materials (NiO) for RRAM application, will be addressed in this talk. Unwanted supply of oxygen atoms from the substrate or other component oxide to the incoming precursors during the precursor pulse step, and outward diffusion of substrate atoms to the growing film surface even during the steady-state growth influenced the growth, crystal structure, and properties of the various films.

• Toxicological Research
• /
• 제30권4호
• /
• pp.267-276
• /
• 2014

Exposures to lead (Pb) are associated with neurological problems including psychiatric disorders and impaired learning and memory. Pb can be absorbed by iron transporters, which are up-regulated in hereditary hemochromatosis, an iron overload disorder in which increased iron deposition in various parenchymal organs promote metal-induced oxidative damage. While dysfunction in HFE (High Fe) gene is the major cause of hemochromatosis, the transport and toxicity of Pb in Hfe-related hemochromatosis are largely unknown. To elucidate the relationship between HFE gene dysfunction and Pb absorption, H67D knock-in Hfe-mutant and wild-type mice were given drinking water containing Pb 1.6 mg/ml ad libitum for 6 weeks and examined for behavioral phenotypes using the nestlet-shredding and marble-burying tests. Latency to nestlet-shredding in Pb-treated wild-type mice was prolonged compared with non-exposed wild-types (p < 0.001), whereas Pb exposure did not alter shredding latency in Hfe-mutant mice. In the marble-burying test, Hfe-mutant mice showed an increased number of marbles buried compared with wild-type mice (p = 0.002), indicating more repetitive behavior upon Hfe mutation. Importantly, Pb-exposed wild-type mice buried more marbles than non-exposed wild-types, whereas the number of marbles buried by Hfe-mutant mice did not change whether or not exposed to Pb. These results suggest that Hfe mutation could normalize Pb-induced behavioral alteration. To explore the mechanism of repetitive behavior caused by Pb, western blot analysis was conducted for proteins involved in brain dopamine metabolism. The levels of tyrosine hydroxylase and dopamine transporter increased upon Pb exposure in both genotypes, whereas Hfe-mutant mice displayed down-regulation of the dopamine transporter and dopamine D1 receptor with D2 receptor elevated. Taken together, our data support the idea that both Pb exposure and Hfe mutation increase repetitive behavior in mice and further suggest that these behavioral changes could be associated with altered dopaminergic neurotransmission, providing a therapeutic basis for psychiatric disorders caused by Pb toxicity.

• Bulletin of the Korean Chemical Society
• /
• 제17권7호
• /
• pp.637-642
• /
• 1996

Preparation and properties of potential CVD (Chemical Vapor Deposition) precursors for the TiO2, a major component of the perovskite materials such as PT, PLT, PZT, and PLZT were investigated. Reactions between β-diketones and TiMe3, formed in situ failed to produce stable Ti(β-diketonate)3 complexes but a stable purple solid, characterized as (OTi(BPP)2)2 (BPP=1,3-biphenyl-1,3-propanedione) was obtained when BPP was used. Several new Ti(Oi-Pr)2(β-diketonate)2 complexes with aromatic or ring substituents were synthesized by the substitution reaction of Ti(OiPr)4by β-diketones and characterized with 1H NMR, IR, ICP, and TGA. Solid complexes such as Ti(Oi-Pr)2(BAC)2 (BAC=1.-phenyl-2,4-pentanedione), Ti(Oi-Pr)2(BPP)2, Ti(Oi-Pr)2(1-HAN)2 (1-HAN=2-hydroxy-1-acetonaphthone), Ti(Oi-Pr)2(2-HAN)2 (2-HAN=1-hydroxy-2-acetonaphthone), Ti(Oi-Pr)2(ACCP)2 (ACCP=2-acetylcyclopentanone), and Ti(Oi-Pr)2(HBP)2 (HBP=2-hydroxybenzophenone) were found to be stable toward moisture and air. Ti(Oi-Pr)2(ACCP)2 and Ti(Oi-Pr)2(HBP)2 were proved to have lower melting points and higher decomposition temperatures. However, these complexes are thermally stable and pyrolysis under an inert atmosphere resulted in incomplete decomposition. Ti(Oi-Pr)2(DPM)2 (DPM=dipivaloylmethane) and Ti(Oi-Pr)2(HFAA)2 (HFAA=hexafluoroacetylacetone) were sublimed substantially during the thermal decomposition. Pyrolysis mechanism of these complexes are dependent on type of β-diketone but removal of Oi-Pr ligands occurs before the decomposition of β-diketonate ligands.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.267-267
• /
• 2019

Driftwood is one of serious problems in a river environment. In several countries, such as Indonesia, Japan, and Italy, the driftwood frequently appears in a river basin, and it can alter the channel bed, flow configuration by wood deposition and jam formation. Therefore, the studies related to driftwood have been actively conducted by many researchers to understand the mechanism of driftwood dynamics. In particular, wood motion by collision is one of the difficult issues in the numerical simulation because the calculation for wood collision requires significantly expensive calculation time due to small time step. Thus, this study conducted the numerical simulation in consideration of the wood motion by water flow and wood collision to understand the wood dynamics in terms of computation. We used the 2D (two-dimensional) depth-averaged velocity model, Nays2DH, which is a Eulerian model to calculate the water flow on the generalized coordinate. A Lagrangian type driftwood model, which expresses the driftwood as connected sphere shape particles, was employed to Nays2DH. In addition, the present study considered root wad effect by using larger diameter for a particle at a head of driftwood. An anisotropic bed friction was considered for the sliding motion dependent on stemwise, streamwise and motion directions. We particularly considered changeable draft at each particle and projection area by an angle between stemwise and flow directions to precisely reproduce the wood motions. The simulation results were compared with experimental results to verify the model. As a result, the simulation results showed good agreement with experimental results. Through this study, it would be expected that this model is a useful tool to predict the driftwood effect in the river flow.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.380-384
• /
• 2016

홍수완화의 관점에서 강을 관리하기 위하여 수자원의 이용과 생태계보전, 하천흐름과 형태학적 변화들에 대하여 충분히 이해하고 합리적으로 설명하는 것이 필요하다. 최근에 수변지역에서 발달된 식생은 홍수시에 감속영역과 생물들의 피난처를 제공하는 것 이외에 횡단방향의 혼합작용을 활성화하여 유사와 식물의 씨앗 및 입자성 유기물(POM)을 포착하는 기능을 하고 특히 흐름과 유사이송 및 하도 지형변화에 큰 영향을 주기 때문에 중요하다. 입자성 유기물(POM)은 하천생태계를 지탱하는 에너지원으로서 다양한 형태로 존재하고 미생물의 분해를 받아 무기화된 식생의 번무와 물질순환의 시발점이 되기도 하지만 현재까지 식생영역 내에서 그 공급과정에 관련이 있는 운동기구에 관한 연구는 아직 부족한 실정이다. 따라서 본 연구는 식생영역의 유사퇴적 및 분급작용, 입자성 유기물의 포착을 일으키는 원인과 흐름의 특징 중 식생영역 내에서 흐름방향으로 감속에 주목하여 수리 모형실험을 실시하였고 수변식생에서 부유사와 POM의 퇴적과정에 대하여 검토 및 모델링을 실시하였다. 수리 모형실험 결과 CPOM과 FPOM 모두 유사의 퇴적없이 그 자체로는 퇴적이 되지 않았고 수변식생의 종방향 이송의 경우 식생에 의해 퇴적된 부유사가 사련 형태로 형성이 되어 CPOM이 사련의 배후에서 캡쳐 되었다. 또한 두가지 샘플 움직임의 상호작용은 사련의 파고와 파장의 전파속도를 감소시켰다. 식생지역에서 횡방향 분산의 경우에 대해서는 각각의 유사 크기에 대한 퇴적물의 능선은 식생의 경계를 따라 형성되었고 운동의 범위는 유사 퇴적의 능선에 의해 촉진되어 횡방향으로 확산하며 확장되었다. 이러한 결과를 바탕으로 제한된 경험적인 지식보다 오히려 실험을 통하여 식생을 동반하는 장소에서 유사와 POM의 거동특성 차이 및 간섭작용을 명확히 한 후 현장에서 관측된 현상과 비교 검증이 필요하다고 사료되며 추후에 운동기구를 모델링 및 업그레이드 해 나가는 것이 앞으로의 하천생태계 예측평가에 필요하다고 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권10호
• /
• pp.1483-1490
• /
• 2019

Objective: To explore the molecular mechanisms of fat metabolism and deposition in pigs, an experiment was conducted to identify hepatic mRNAs and miRNAs expression and determine the potential interaction of them in two phenotypically extreme pig breeds. Methods: mRNA and miRNA profiling of liver from 70-day Jinhua (JH) and Landrace (LD) pigs were performed using RNA sequencing. Blood samples were taken to detect results of serum biochemistry. Bioinformatics analysis were applied to construct differentially expressed miRNA-mRNA network. Results: Serum total triiodothyronine and total thyroxine were significantly lower in Jinhua pigs, but the content of serum total cholesterol (TCH) and low-density lipoprotein cholesterol were strikingly higher. A total of 467 differentially expressed genes (DEGs) and 35 differentially expressed miRNAs (DE miRNAs) were identified between JH and LD groups. Gene ontology analysis suggested that DEGs were involved in oxidation-reduction, lipid biosynthetic and lipid metabolism process. Interaction network of DEGs and DE miRNAs were constructed, according to target prediction results. Conclusion: We generated transcriptome and miRNAome profiles of liver from JH and LD pig breeds which represent distinguishing phenotypes of growth and metabolism. The potential miRNA-mRNA interaction networks may provide a comprehensive understanding in the mechanism of lipid metabolism. These results serve as a basis for further investigation on biological functions of miRNAs in the porcine liver.