• 한국진공학회지
• /
• 제19권2호
• /
• pp.148-154
• /
• 2010

본 논문에서는 유기발광다이오드의 보호막 적용을 위하여 TCP-CVD를 이용한 실리콘 산화막 형성에서 산화막의 특성에 영향을 미치는 Power, 가스종류 및 유량, 소스와 기판거리 및 공정온도 등의 공정조건에 따른 증착된 산화막의 특성을 나타내는 증착률, 굴절률을 제어하고자 한다. 그 결과 $SiH_4$ : $O_2$ = 30 : 60 [sccm], 70 [mm]의 source와 기판 거리, Bias를 인가하지 않은 조건에서 80 [$^{\circ}C$] 이하의 공정온도를 보였으며 투과율 90% 이상, 높은 증착률 및 굴절률 1.4~1.5인 안정된 $SiO_2$ 산화박막을 제조할 수 있었다.

• 한국재료학회지
• /
• 제15권5호
• /
• pp.285-292
• /
• 2005

Anti-reflection film was coated by using spherical silica nano colloids. Silica colloid sol was reserved between two inclined slide glasses by capillary force, and particles were convectively stacked to form a film onto the substrate as the water evaporates. As the sliding speed increased, the thickness of the film decreased and the wavelength at the maximum transmittance decreased. The microstructure observed by SEM showed that silica particles were nearly close packed, which enabled the calculation of the effective refractive index of the film. The film thickness was measured by proffer and calculated from the wavelength of maximum transmittance and the effective refractive index. The effective refractive index of the film could be controlled by a subtle controlling of the coating speed and by mixing two different sized silica particles. When the 100 nm and 50 m particles were mixed at 4:1-5:1 volume ratio, the maximum transmittance of $95.2\%$ for one-sided coating was obtained. This is the one that has increased by $3.8\%$ compared to bare glass substrate, and shows that $99.0\%$ of transmittance or $1.0\%$ of reflectance can be achieved by the simple process if both sides of the substrate are coated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.247-250
• /
• 2001

We studied optical properties of SiON thin-film in the applications of optical waveguide. SiON thin-film was grown in $300^{\circ}C$ by PECVD(plasma enhanced chemical vapor deposition) system. The change of SiON thin-film composition and refractive Index was studied as a function of varying $NH_3$ gas flow rate. As $NH_3$ gas flow rate was increased, Quantity of N and refractive index were increased at the same time. By the results, we could form the SiON thin-film to use of a waveguide with refractive index of 1.6. We analyzed the conditions of the thin-film with FTIR(fourier transform infrared) and OES (optical emission spectroscopy). N-H bonding($3390cm^{-1}$ ) can be removed by thermal annealing. And we could observe the SiH bonding state and quantity by OES analysis in $SiH_4$

• Advances in materials Research
• /
• 제1권1호
• /
• pp.1-12
• /
• 2012

There have been many efforts on the generating metal nanocrystals enclosed by high-index facets for the use as highly active catalysts. This paper describes a facile synthesis of Au trisoctahedra with high-index facets. In brief, the Au trisoctahdra were prepared by reduction of $HAuCl_4$ in N,N-dimethylformamide (DMF) containing poly (vinyl pyrrolidone) (PVP) and trace amount of $AgNO_3$. The Ag ions in the reaction solution played a critical role in controlling the trisoctahedral shape of the final product by underpotential deposition (UPD) on the Au surfaces. The as-prepared Au trisoctahedra were single crystal and enclosed by high-index {441}, {773} and {331} facets.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.247-250
• /
• 2001

We studied optical properties of SiON thin-film in the applications of optical waveguide. SiON thin-film was grown in 300$^{\circ}C$ by PECVD(plasma enhanced chemical vapor deposition) system. The change of SiON thin-film composition and refractive Index was studied as a function of varying NH$_3$ gas flow rate. As NH$_3$ gas flow rate was increased, Quantity of N and refractive index were increased at the same time. By the results, we could form the SiON thin-film to use of a waveguide with refractive index of 1.6. We analyzed the conditions of the thin-film with FTIR(fourier transform infrared) and OES(optical emission spectroscopy). N-H bonding(3390cm$\^$-1/) can be removed by thermal annealing. And we could observe the SiH bonding state and quantity by OES analysis in SiH$_4$

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.35-39
• /
• 2023

Silicon oxide thin films have been deposited by plasma-enhanced chemical vapor deposition in SiH4 and N2O plasma along the variation of the gas flow ratio. Optical emission spectroscopy was employed to monitor the plasma and ellipsometry was employed to obtain refractive index of the deposited thin film. The atomic ratio of Si, O, and N in the film was obtained using XPS depth profiling. Fourier Transform Infrared Spectroscopy was used to analyze structures of the films. RI decreased with the increase in N2O/SiH4 gas flow ratio. We noticed the increase in the Si-O-Si bond angles as the N2O/SiH4 gas flow ratio increased, according to the analysis of the Si-O-Si stretching peak between 950 and 1,150 cm-1 in the wavenumber. We observed a correlation between the optical emission intensity ratio of (ISi+ISiH)/IO. The OES intensity ratio is also related with the measured refractive index and chemical composition ratio of the deposited thin film. Therefore, we report the added value of OES data analysis from the plasma related to the thin film characteristics in the PECVD process.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.139-143
• /
• 2021

Cr-Al-N coatings were deposited onto WC-Co substrates using a cathodic arc evaporation (CAE) system. CAE technique is recognized to be a very useful process for hard coatings because it has many advantages such as high packing density and good adhesion to metallic substrates. In this study, the influence of deposition temperature as a key process parameter on film growth behavior and mechanical properties of Cr-Al-N coatings were systematically investigated and correlated with microstructural changes. From various analyses, the Cr-Al-N coatings prepared at deposition temperature of 450℃ in the CAE process showed excellent mechanical properties with higher deposition rate. The Cr-Al-N coatings with deposition temperature around 450℃ exhibited the highest hardness of about 35 GPa and elastic modulus of 442 GPa. The resistance to elastic strain to failure (H/E ratio) and the index of plastic deformation (H³/E² ratio) were also good values of 0.079 and 0.221 GPa, respectively, at the deposition temperature of 450℃. Based on the XRD, SEM and TEM analyses, the Cr-Al-N coatings exhibited a dense columnar structure with f.c.c. (Cr,Al)N multi-oriented phases in which crystallites showed irregular shapes (50~100nm in size) with many edge dislocations and lattice mismatches.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2245-2248
• /
• 2009

This paper demonstrates room temperature chemical vapor deposition (RTCVD) for fabricating titania inverse opals. The colloidal crystals of monodisperse polymer latex spheres were used as a sacrificial template. Titania was deposited into the interstices between the colloidal spheres by altermate exposures to water and titanium tetrachloride (Ti$Cl_4$) vapors. The deposition was achieved under atmospheric pressure and at room temperature. Titania inverse opals were obtained by burning out the colloidal template at high temperatures. The filling fraction of titania was controlled by the number of deposition of Ti$Cl_4$ vapor. The morphology of inverse opals of titania were investigated. The optical reflection spectra revealed a photonic band gap and was used to estimate the refractive index of titania.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.797-802
• /
• 1996

Hydrogenated amorphous silicon carbide (a-SiC:H) films have been deposited on unheated substrates by low frequency (50Hz) plasma using $SiH_4+CH_4+H_2$ gas mixtures. Deposition rate, refractive index, optical band gap, Vickers hardness and IR spectrum of the deposited a -SiC:H films have been measured for various rations of gas flow rates k(=$CH_4/SiH_4$, 0.5k4) with a constant $H_2$ flow rate (100sccm). As k increases, the deposition rate of the a-SiC:H films increases up to the maximum value of about 220nm/h at k=2.5, and then it decreases. The refractive index of the films was 2.6 for k=2.5, while the optical band gap of the films was 3.3eV for k=2.2. The maximum value of Vickers hardness of the films was 1500Hv at k=1. The infrared transmission measurement shows that the films contain both Si-C and Si-$CH_3$ bonds.

• 환경위생공학
• /
• 제13권3호
• /
• pp.37-42
• /
• 1998

2-Bromopropane has been implicated to be the reason for the mass intoxication of workers at an electronic company in Korea. 2-Bromopropane deposition and pattern of DNA replication in mouse fetuses were analyzed after intravenous injection of 2-bromopropane. Injections were administered to pregnant ICR mice in order to cytogenetically evaluate transplacental 2-bromopropane. The results are summarized as follows; 1. A dose-dependent effect on DNA replication was observed equally in the lung, liver and kideneys of fetuses has been exposed to 2-bromopropane transplacentally as reductions of the labeling index. 2. Deposition of transplacentally administred 2-bromopropane in the fetus was lower than placenta.