• 한국표면공학회지
• /
• 제21권4호
• /
• pp.168-175
• /
• 1988

The nickel0zinc allot depositions have been studjen in ammonium chloridw added chloride baths to fine out the effects of ultrasonic irradiation for the electrodeposition processes. The compositions of deposited alloys, the current efficiencies, corrosion resistance and brightness in various conditions of electrodeposition were investigated, in the range of ultrasonic irradiation of 50,500 and 1,000kc/s respectively. The results obtained are as follows; 1. the ratio of nikel to zinc in the deposit increased according 시 the ammonium chloride concentration in irradiated baths. 2. The current efficiencies became also higer in the irradiated bath. 3. Ammonium ions in solution seem to retard formation of zinc hydroxide. 4. The corrsion resistance and brightness of the deposits are dependent upon nickel content of deposits which ranges 10-18%(wt)nickel in the irradiated baths and 11-15%(wt)in ninirradisted baths. 5. The corrosion resistance and brightnes of the deposited are appreciably better in the irradiated baths than in non-irradiated bath with the mole ratio of 3.4(NH+4/Ni+++Zn++).

• 대한가정학회지
• /
• 제41권12호
• /
• pp.187-205
• /
• 2003

This study is to design aged institutional household on a small scale, also the purpose of this study is to provide basic material for management of small scale institutional household and policy establishment that could help the aged well-being. Design of research is accomplished after the review of related literatures. The propositions of design are 3s follows; region：seoul suburbs(2 hours' distance) building：fourth stories(The building-to-land ratio 25％, capacious ratio 100％, in environmental affinity.) object：75 years and over aged 15 women cost：deposit and living month expenses contract between the manager and the desired occupant or concerned family term of validity：As long as occupant want.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.464-466
• /
• 2000

AIN thin films have been prepared by reactive sputtering method, using facing targets sputtering system with a DC power supply which can deposit a high quality thin film and control deposition condition in all range of nitrogen. The crystallographic characteristics of AIN thin films on N$_2$/Ar ratio was investigated by alpha-step and X-ray diffraction. As a result, the AIN film deposited at the pressure ratio of the nitrogen of 30% revealed strong X-ray diffraction intensity under substrate temperature 25$^{\circ}C$ and applied current 0.4A.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.423-430
• /
• 2002

A feasibility of a trial test method was evaluated analytically, in which the elastic modulus of a soil deposit was tried to estimate by analyzing dynamic signals measured during conducting the SPT. If there existed a reliable relationship between the impedance ratio of a rod to a soil and the amplitude ratio of a reflected to an incident wave signal at the tip of steel rod contacting the soil surface, it was expected that one could determine the impedance of soil, and then roughly estimate the elastic modulus from the impedance. For a simple rod-soil system, the existence of the relevant relationship was verified in this study by analyzing computed wave signals propagating up and down through the rod. On the basis of these results, thus, a potential of the test method to practical applications could be seen. However, apparent theoretical shortcomings possessed in this approach were also realized since the soil part had an unconfined contact area where contacted with the rod. Therefore, it was concluded that further studies needed to be conducted, in which the reliable theoretical relationship between the impedance and the amplitude ratio as well as the effective contacting soil area contributing to wave reflection should be justified.

• 대한원격탐사학회지
• /
• 제35권4호
• /
• pp.535-544
• /
• 2019

This study demonstrated the ability of a Landsat-8 OLI multispectral data to identify and delineate hydrothermal alteration zones around auriferous prospects within the crystalline basement, North-western Nigeria. Remote sensing techniques have been widely used in lithological, structural discrimination and alteration rock delineation, and in general geological studies. Several artisanal mining activities for gold deposit occur in the surrounding areas within the basement complex and the search for new possible mineralized zones have heightened in recent times. Systematic Landsat-8 OLI data processing methods such as colour composite, band ratio and minimum noise fraction were used in this study. Colour composite of band 4, 3 and 2 was displayed in Red-Green-Blue colour image to distinguish lithologies. Band ratio ${\frac{4}{2}}$ image displayed in red was used to highlight ferric-ion bearing minerals(hematite, goethite, jarosite) associated with hydrothermal alteration, band ratio ${\frac{5}{6}}$ image displayed in green was used to highlight ferrous-ion bearing minerals such as olivine, amphibole and pyroxenes, while ratio ${\frac{6}{7}}$ image displayed in blue was used to highlight clay minerals, micas, talc-carbonates, etc. Band rationing helped to reduce the topographic illumination effect within images. The result of this study showed the distribution of the lithological units and the hydrothermal alteration zone which can be further prospected for mineral reserves.

• 암석학회지
• /
• 제26권3호
• /
• pp.255-269
• /
• 2017

여러 분야에서 높은 관심을 받고 있으며 무엇보다 지질학적으로 희소성과 순수성을 지닌 독도 천연보호구역의 해빈자갈퇴적층(몽돌 해변)을 대상으로 5년간 외부에서 유입된 역 이 얼마나 분포하는지에 대해 모니터링 하였다. 연구 지역인 동도 선착장 인근 및 서도 어민 숙소 인근 해빈자갈퇴적층에서, 주로 발견되는 몽돌의 종류에는 독도에서 직접적으로 기원한 것으로 판단되는 현무암, 조면암류, 응회암류와 외부에서 유입된 것으로 판단되는 화강암, 유문암, 편마암, 규암, 대리암, 그리고 콘크리트가 있다. 2011년과 2016년의 외래 역 데이터를 비교해 보면 동 서도에서 암종의 변화는 발견되지 않았으며, 각 지역에서 가장 빈번하게 발견되는 외래 역의 순위 역시 동도에서 화강암, 콘크리트, 편마암, 그리고 서도에서 콘크리트, 편마암, 화강암 순으로 동일하다. 그러나 동도와 서도의 전체 조사 면적에 대한 외래 역 면적의 비율은 다소 감소했다. 기존 시설물의 파괴와 외래 건축 자재 유입이 해빈자갈퇴적층에 존재하는 외래 역에 대한 주요한 유입 경로로 예상되는 가운데, 전체적인 오염도가 감소했다는 점은 연구기간 동안 외래 역 유입에 대한 관리가 대체로 개선 또는 최소한 악화되지 않았다는 점을 지시한다. 한편 지속적인 낙석이 몽돌의 분포에 영향을 끼친 것으로 판단되며, 낙석 영향에 대한 지속적인 평가가 요구된다.

• 한국콘텐츠학회논문지
• /
• 제18권1호
• /
• pp.196-209
• /
• 2018

은행의 수익성과 관련하여 어떠한 요인들이 영향을 미치는지 연구하고 있다. 본 연구에서는 은행의 수익성 개선을 위한 자금조달구조의 다양화 측면에서 기존연구와 달리 시장성수신비중을 주요 관심변수로 하여 8개의 설명변수와 총자산영업이익률을 수익성 지표로 사용하여 가설설정하고 전체기간과 금융위기 전 후 로 비교 분석하여 차이를 보고자 한다. 다중회귀분석한 결과, 모든 분석기간에서 유의미한 결과가 나타나는 수익성 요인은 원화예대금리차, 점포수, 고정이하여신비율이며 국내은행은 원화예대금리차가 커지고 점포수가 증가할수록 수익성도 향상되고 부실여신이 증가하면 수익성도 하락하는 것을 알 수 있다. 시장성수신비중은 은행의 수익성에 통계적으로 유의미한 영향을 주지는 못하는 것으로 나타났다. 글로벌 금융위기이전에는 거시경제지표의 영향을 받기 보다는 개별 은행의 상황 및 다른 금융환경의 영향을 더 받았다는 것을 알 수 있으며 금융위기이후에는 은행의 여신이 증가하면서 수익성도 향상되는 것으로 추정할 수 있다. 은행의 수익성 요인은 분석 기간별 특징이 있다고 추론되며 이에 그 의미와 시사점을 가진다. 향후 은행산업의 수익성에 관한 연구는 특수은행이 포함된 국내은행 전체로 대상을 확대할 필요가 있다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.377-384
• /
• 2020

Banking is very regulated by the government and even has to follow regulations issued by the Basel Committee on Banking Supervision, which regulates banking in the world. According to Basel III, banks must provide capital reserves called capital buffers. The purpose of this study is to examine the factors that determine capital buffer. Factors thought to affect the capital buffer studied consisted of profitability (ROA), credit risk (NPL), liquidity risk (LDR), capital adequacy in the previous period (CARt-1), management risk (NIM), and ratio of operating risk (OER). The population in this study is conventional banks listed on the Indonesia Stock Exchange, as many as 42 banks, with a sample of 40 banks taken by purposive sampling method with an observation period of four years with quarterly data (2016-2019). To test the hypotheses, regression panel data is used. After being tested, it turns out that the fixed effect model is better than the common effect and random effect. The results of the study with fixed effect models show that ROA, NPL, and OER significantly and negatively affect capital buffer. CAR_t-1 has a positive and significant effect on capital buffer, while LDR and NIM do not affect capital buffer.

• The Korean Journal of Ecology
• /
• 제25권1호
• /
• pp.45-49
• /
• 2002

Pollen analyses and $^{14}$ C dating of the sediments of the Akindonuma moor, which is situated in a closed depression of an old landslide, were peformed in order to study the vegetation history of the montane zone of the Miyagi Prefecture, Northeast Japan. The main results are as follows: Two forest zones have been distinguished: 1) the A-I zone, or the Fagus-Quercus-Betula forest (R I stage, before about 11,700 yrs B.P.), and 2) the A-II zone, or the Fagus-Quercus forest (R II stage, after about 11,700 yrs B.P.). By comparing the geological section with the pollen diagram of the moor, it is assumed that the deposit environment of the Middle Part, which mostly consists of peat layers, is very stable. During the period, the Ulmus/Zelfkova pollen ratio was very low and small peak was not recognized. According to the preceding research, theme is a close relationship between the fluctuation of the Ulmus/Zelkova pollen ratio and the general trend of hillslope instability in the changing balance of temporature and precipitation Actually, Zelkova serrata tends to cover the footslope and the lower sideslope. Ulmus davidiana covers the footslope and the alluvial cone. Therefore, the fact that the Ulmus/Zeikova pollen ratio was very low and small peak was not recognized, is believed to reflect the stability of the earth's surface environment, which was estimated from the geological section.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1314-1319
• /
• 2006

This paper describes the novel fabrication method of the high-aspect-ratio nano structure which is impossible by conventional method using a shadow mask and a Deep X-ray Lithography (DXRL). The shadow mask with $1{\mu}m-sized$ apertures is fabricated on the silicon membrane using a conventional UV-lithography. The size of aperture is reduced to 200nm by accumulated low stress silicon nitride using a LPCVD (low pressure chemical vapor deposition) process. The X-ray mask is fabricated by depositing absorber layer (Au, $3{\mu}m$) on the back side of nano shadow mask. The thickness of an absorber layer must deposit dozens micrometers to obtain contrast more than 100 for a conventional DXRL process. The thickness of $3{\mu}m-absorber$ layer can get sufficient contrast using a central beam stop method, blocking high energy X-rays. The nano circle and nano line, 200nm in diameter in width, respectively, were demonstrated 700nm in height with a negative photoresist of SU-8.