• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.571-577
• /
• 2017

This study aimed at evaluating the potential of makgeolli, which is widely consumed as beverage, as a functional cosmetic ingredient, based on analyses on its antioxidant activity and tyrosinase activity inhibitory effect. The sample was extracted by concentrating the suspension obtained after adding MeOH (3 L) to the residue of a commercial makgeolli and then adding EtOAc (3 L) to the concentrate, which was subjected to fractionation. The upper layer of the fractions was used as the final sample. In MTT assay assessments, no cytotoxicity was observed at a concentration range of 10 to $1,000{\mu}g/mL$; the antioxidant activity of the extract showed a concentration-dependent tendency and it had a high activity with an $EC_{50}$ of 7.008 mg/mL. Also, in a tyrosinase activity inhibitory effect assessment, the extract showed an $IC_{50}$ value of 39.22 mg/mL. These results confirmed that this sample has potential as a functional cosmetic ingredient.

• Korean Journal of Digital Imaging in Medicine
• /
• v.8 no.1
• /
• pp.51-55
• /
• 2006

The effects of Asaddition in amorphous selenium(a-Se) films for digital X-ray conversion material have been studied using the moving photocarrier grating(MPG) technique. This method utilizes the moving interference pattern generated by the superposition of the two frequency shifted laser beams for the illumination of the sample. This moving intensity grating induces a short circuit current, j$_{sc}$ in a-Se:As film. The transport parameters of the sample are extracted from the grating-velocity dependent short circuit current induced in the sample along the modulation direction. The electron and hole mobility, and recombination lifetime of a-Se films with arsenic(As) additions have been obtained. We have found an Increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film, whereas electron mobility decreases with As addition due to the defect density. The transport properties for As doped a-Se films obtained by using MPG technique have been compared with X-ray sensitivity for a-Se:As device. The fabricated a-Se(0.3% As) device film exhibited the highest X-ray sensitivity out of 5 samples.

• Journal of Korean Society on Water Environment
• /
• v.34 no.3
• /
• pp.251-269
• /
• 2018

In 1997, the environmental score (Q) corresponding the tolerance value of Korean benthic macroinvertebrate species and the related biotic score, the ecological score of benthic macroinvertebrates (ESB) were proposed; ESB was similar to Beck's biotic index or Chandler's biotic score. This study was carried out to revise the Q values of individual species and the assessment scheme of ESB based on the taxonomic performance and ecological information accumulated since then. The original ESB was renamed as TESB (total ESB), and AESB (average ESB) was newly proposed. AESB is calculated by dividing the TESB (for a given station) by the number of species present in the sample. In this study, TESB showed a positively skewed distribution, while AESB showed a negatively skewed distribution. The correlation between TESB and the concentration of $BOD_5$ was a little stronger than that of the original ESB. TESB showed a very strong correlation (correlation coefficient r = 0.98) with Margalef's species richness, of which correlation coefficient was higher than that of AESB (r = 0.85). AESB showed a strong correlation (r = -0.79) with the concentration of $BOD_5$, while TESB showed a weaker correlation (r = -0.67). Applying TESB and AESB together in an assessment of the environment may be comprehensive because the physical and chemical states of the environment can be evaluated together. AESB is less dependent on the sample size, while TESB tends to increase as the sample size increases. In the evaluation of the environment using TESB, it is necessary to standardize the methods on monitoring.

• Journal of Life Science
• /
• v.24 no.4
• /
• pp.419-427
• /
• 2014

In order to examine antioxidative characteristics of Artemisia capillaris response surface methodology was used to optimize the hot water extraction process by analyzing and monitoring the extraction condition. For total phenolic compounds content, the optimal extraction temperature, time and amount of solvent per sample were $94.50^{\circ}C$, 2.06 hr and 25.03 ml/g, respectively. Also, the optimal conditions for electronic donating ability were $91.82^{\circ}C$, 2.90 hr and 20.88 ml/g, respectively. The nitrile scavenging ability (pH 1.2) was optimized using the extraction temperature of $97.36^{\circ}C$, extraction time 2.75 hr and 15.19 ml/g as the amount of solvent per sample. Regression equations of total phenolic compounds content, electron donating ability and nitrile scavenging ability as dependent variable were deduced from each analyzed extraction condition. And finally, their response surfaces were superimposed with the optimal conditions to obtain values for each extraction process factor. The predicted results through superimposing were extraction temperature $90{\sim}95^{\circ}C$, extraction time 2.5~3.5 hr and amount of solvent per sample 17~24 ml/g.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2006

A study of the adsorption site of CO in the Ni(111)$(2\times2)$-O/CO coadsorbed phase over different sample preparation temperatures revealed that the atop site is favoured. The Ni-C spacing is given by $1.77\pm0.01\;{\AA}$. A study of the adsorption site of Co in the Ni(111)$(2\times2)$-O/CO coadsorbed phase over different sample preparation temperatures revealed that the atop site is favoured. The Ni-C spacing is given by $1.77\pm0.01\;{\AA}$. The data from the sample prepared at 265 K showed atop sites, which is well consistent with vibrational spectroscopy, whilst the data from the low temperature preparation appears the mixture of atop and hop $(35\%)$. The occupation of hop hollow sites is probably due to an incorrect pre-coverage of atomic oxygen (different from 0.25ml). Similar observation of site mixture also found in recent high resolution XPS measurements using C 1s and O 1s chemical shifts.

• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2012

The fabrications condition and superconducting properties of top-seeded melt growth (TSMG) processed $GdBa_2Cu_3O_{7-y}$ (Gd123) bulk superconductors were studied. Processing parameters (a maximum temperature ($T_{max}$), a temperature for crystal growth ($T_G$) and a cooling rate ($R_G$) through a peritectic temperature ($T_P$) for the fabrication of single grain Gd123 superconductors were optimized. The magnetic levitation forces, trapped magnetic fields, superconducting transition temperature ($T_c$) and critical current density ($J_c$) of the Gd123 bulks superconductors were estimated. Single grain Gd123 bulk superconductors were successfully fabricated at the optimized processing condition. The $T_c$ of a TSMG processed Gd123 sample was 92.5 K and the $J_c$ at 77 K and 0 T was approximately $50kA/cm^2$. The trapped magnetic field contour and magnetic levitation forces were dependent on the top surface morphology of TSMG processed Gd123 samples. The single grain Gd123 samples, field-cooled at 77 K using a Nd-B-Fe permanent magnet with 5.27 kG and 30 mm dia., showed the trapped magnetic field contour of a single grain with a maximum of 4 kG at the sample center. The maximum magnetic levitation forces of the single grain Gd123 sample, field-cooled or zero field-cooled, were 40 N and 107 N, respectively.

• Korean Journal of Materials Research
• /
• v.29 no.8
• /
• pp.469-476
• /
• 2019

A lead-free bulk ceramic having a chemical formula $Ba_{0.8}Ca_{0.2}(Ti_{0.8}Zr_{0.1}Ce_{0.1})O_3$ (further termed as BCTZCO) is synthesized using mixed oxide route. The structural, dielectric, impedance, and conductivity properties, as well as the modulus of the synthesized sample are discussed in the present work. Analysis of X-ray diffraction data obtained at room temperature reveals the existence of some impurity phases. The natural surface morphology shows close packing of grains with few voids. Attempts have been made to study the (a) effect of microstructures containing grains, grain boundaries, and electrodes on impedance and capacitive characteristics, (b) relationship between properties and crystal structure, and (c) nature of the relaxation mechanism of the prepared samples. The relationship between the structure and physical properties is established. The frequency and temperature dependence of the dielectric properties reveal that this complex system has a high dielectric constant and low tangent loss. An analysis of impedance and related parameters illuminates the contributions of grains. The activation energy is determined for only the high temperature region in the temperature dependent AC conductivity graph. Deviation from the Debye behavior is seen in the Nyquist plot at different temperatures. The relaxation mechanism and the electrical transport properties in the sample are investigated with the help of various spectroscopic (i.e., dielectric, modulus, and impedance) techniques. This lead free sample will serve as a base for device engineering.

• Journal of Korean Academy of Nursing
• /
• v.53 no.2
• /
• pp.167-176
• /
• 2023

Purpose: Despite the high prevalence of visual impairment caused by diabetic retinopathy and nutritional problems among older adults with diabetes, evidence regarding factors related to nutritional risk in this population is limited. Therefore, this study aimed to identify the correlates of nutritional risk among older adults with diabetes, focusing on visual impairment. Methods: This study was a secondary data analysis of the 2020 National Survey of Older Koreans aged 65 years and above. The sample comprised 2,376 older adults with diabetes, and complex sample ANOVA and Rao-Scott chi-square tests were used to compare the groups according to visual impairment. Complex-sample logistic regression analyses were conducted to verify the association between visual impairment and nutritional risk. Results: Older adults with diabetes, who also have severe visual impairment, are more likely to have nutritional risk status than those without impairment after controlling for covariates (odds ratio [OR] = 2.44, 95% confidence interval [CI] 1.16~5.13). Among the covariates, depression (OR = 3.58, 95% CI 2.60~4.94), dependent activities of daily living status (OR = 2.79, 95% CI 1.60~4.86), and experience of hospitalization during the past year (OR = 2.51, 95% CI 1.57~4.03) were strongly associated with nutritional risk. Conclusion: Severe visual impairment increases the nutritional risk among older adults with diabetes. Therefore, it is essential to prevent visual impairment due to exacerbation of diabetes through appropriate management. Additionally, tailored nutritional interventions for visually impaired older adults with diabetes that consider visual characteristics are required.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.777-782
• /
• 2003

Response surface methodology (RSM) was used to monitor the characteristics of ethanol extracts from Hericium erinaceus. A central composite design was applied to investigate the effects of independent variables, ethanol concentration $(X_1)$, and sample ratio $(X_2)$ on dependent variables, soluble solid $(Y_1)$, total phenols $(Y_2)$, crude protein $(Y_3)$, electron donating ability $(Y_4)$, and browning color $(Y_5)$ of the extracts. As the sample ratio increased, the soluble solid content increased. Ethanol concentration played a minor role. Total phenols and crude protein increased with sample ratio. Sample ratio had a greater effect than alcohol concentration in the extraction of soluble solid, total phenols, crude protein, and browning color, with an exception of electron donating ability. The optimum ranges at 2 hr extraction was $3.9{\sim}5.0\;g/l00\;mL$ in sample ratio and $36{\sim}52%$ in ethanol concentration. Predicted values at the optimized conditions were acceptable when compared to experimental values.