• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.186-192
• /
• 2022

This study investigated 110 contractual industries to identify the effects of curriculum development and educational environment improvement through Ulsan College LINC+ Program on job education and training. As a result of the study, core competency and job competency were 5.73 points each in field practice and educational environment, and job performance was significant with OJT 5.58 points and 5.74 points for educational environment(p<0.05). The relationship between suitability of the curriculum, educational environment, and recruitment performance was significant with 5.73 points for OJT, 5.74 points for field training during the education and training period, and 5.79 points for educational environment, and job reeducation/training expense was significant with 5.73 points for OJT and 5.79 points for educational environment(p<0.05). Also, students who completed the LINC+business curriculum shortened their job period by 1 to 6 months in 86.3% of the respondents, and responded that the education expense for new employees was reduced. Therefore, it was identified that the LINC+ Program of Ulsan College has the effect of shortening the job adaptation period and reducing education expenses for new employees by operating the curriculum reflecting the needs of the industry and improving the same educational environment as the industrial field.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.185-192
• /
• 2019

The introduction of smart technology provides accuracy, safety, and efficiency to both physicians and patients. Although interest in a clear aligner is increasing among users worldwide, the current clear aligner requires a visit to the hospital every one or two weeks for replacement, which is a very cumbersome process. There is also confusion among dentists and patients because about 40 to 80 devices are made, and calibration is done based on the order and duration of the clear aligner. Therefore, this study designed and developed a clear aligner management system so that communication between the patient and dentist can be smoothly performed by inserting the QR code into the transparent correction device. As a result, the size of the QR code was recognized as $6{\ast}6mm^2$ which can be used in the oral and the recognition distance was 100% within 12 cm. Since the dentist can remotely manage the patient with the proposed system and improve the correction effect, it is possible to manage patients abroad, as well as domestically.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.90-96
• /
• 2019

The objective of this study was to evaluate the potential of Diospyros malabarica stem extract, a natural materials, in oral health material. With this aim in mind, thin layer chromatography (TLC), TLC-bioautography, high-performance liquid chromatography (HPLC), electrospray ionization-mass spectrometry (ESI-MS), scanning electron microscopy (SEM), and real-time qPCR were performed. The antibacterial activity of D. malabarica stem extract against Streptococcus mutans KCTC3065 was confirmed in an n-hexane fraction with low polarity. The molecular weight of the antibacterial compound was estimated to be 188 by ESI-MS analysis. The inhibitory effects of the extract on biofilm formation and gene expression related to biofilm formation of S. mutans were determined by SEM and real-time PCR analysis. The extract inhibited the formation of S. mutans biofilms at D. malabarica stem extract concentrations of 1 mg/ml, as shown by SEM. The real-time PCR analysis showed that the expression of the gtfC gene, which is associated with biofilm formation, was significantly decreased in a dose-dependent manner. Based on the above results, it can be concluded that D. malabarica stem extracts, a natural materials, can be used in oral health products to suppress the formation of biofilms by inhibiting tooth adhesion of S. mutans, a causative agent of dental caries.

• Journal of Oral Medicine and Pain
• /
• v.45 no.1
• /
• pp.1-11
• /
• 2020

Purpose: The purpose of this study was to assess influences of psychological factors on sleep disturbances in young adults through the revised version of the Minnesota Multiphasic Personality Inventory (MMPI-2). Methods: Two hundred and ninety nine college students in Gyeonggi-do completed the MMPI-2 and a questionnaire related to sleep disturbances and collected data were analyzed by logistic regression. Results: The odds of tooth grinding increased significantly with the increase of T-score of hysteria (Hy) scale. The increase of T-score of hypomania (Ma) and social introversion (Si) scale significantly contributed to the risk of insomnia. The occurrence of insomnia increased significantly as T-score of somatic complaints (RC1) and psychoticism (PSYC) scale increased. The odds of tooth grinding increased significantly as T-score of anxiety (ANX) and family problems (FAM) scale increased. The occurrence of insomnia decreased significantly with the increase of T-score of type A behavior (TPA) scale. The increase of T-score of dominance (Do) scale significantly contributed to the risk of tooth clenching. The odds of tooth grinding decreased significantly as T-score of MacAndrew alcoholism-revised (MAC-R) scale increased, whereas it increased significantly as T-score of addiction potential scale (APS) increased. No scale of MMPI-2 significantly affected the occurrence of snoring. Conclusions: T-scores of Hy, ANX, FAM, Do, MAC-R, and APS scales on MMPI-2 affected the risk of bruxism. T-scores of Ma, Si, RC1, PSYC, and TPA scales on MMPI-2 influenced the occurrence of insomnia. The psychometric instrument such as MMPI-2 is helpful in understanding and managing bruxism and insomnia.

• Journal of radiological science and technology
• /
• v.41 no.5
• /
• pp.493-504
• /
• 2018

The diagnostic radiation equipment is managed in accordance with the "Rules for Safety Management of Diagnostic Radiation Equipment" enacted in 1995. The equipments should be inspected before use and every three years after use in accordance with the [Appendix 1] of the same rule. The inspection standard has been maintained without particular revision since enacted. But, over the past two decades new types of equipments have been manufactured and used. So, it is necessary to revise [Appendix 1] by making inspection items and inspection standards. In this study, we revised the classification system of equipments and reviewed international standards of IEC 60601 series, IEC 61223 series and AAPM TG 18 On-line Report No.03. And identified the problem of current inspection standards. Through this, we revised, deleted and added the inspection items and inspection standard of each equipment to meet the domestic circumstances. As a result of the study, we reorganized the classification system of equipment which are current classified as 5 classes into 22 classes as X-ray system etc. (7 classes), CT system etc. (5 classes) and Dental X-ray system etc. (10 classes). And then, we developed 70 inspection items for 6 types of equipments according to the reorganized classification system of equipments. The inspection items and inspection standards derived from this study have been proposed to the KCDC and will be applied to the revision of the Rule's [Appendix 1]. Therefore, we expect to be used as reference materials for domestic medical center, inspection institutions, and equipment manufacturing import companies.

• Journal of Oral Medicine and Pain
• /
• v.44 no.1
• /
• pp.16-24
• /
• 2019

Purpose: The purpose of this study was to assess the association of personality characteristics with temporomandibular disorders (TMDs). Methods: Four hundred and fifty one college students in Gyeonggi-do completed the revised version of the Minnesota Multiphasic Personality Inventory (MMPI-2) and a questionnaire and collected data were analyzed by IBM SPSS Statistics ver. 25.0 software (IBM Co., Armonk, NY, USA). Results: Mean values of the number of positive answers of TMD symptoms were significantly higher in higher scorers on hypochondriasis (Hs), depression (D), paranoia (Pa) (Hs>60, D>64, Pa>59) (p<0.01). Higher scorers on Hs, hysteria (Hy), schizophrenia (Sc), Pa, psychasthenia (Pt) (Hy>64, Sc>64, Pt>64) exhibited significantly higher mean values of the number of positive answers of contributing factors for TMD (p<0.01, p<0.001). Low scorers on social introversion ($Si{\leq}44$) exhibited significantly lower mean value of the number of positive answers of contributing factors for TMD than high or moderate scorers on Si (Si>64, 45-64) (p<0.01, p<0.05). The percentage of subjects who responded that they had at least one TMD symptom was significantly higher in higher scorers on Hs, Pt, D (p<0.05, p<0.01). The significantly higher percentage of higher scorers on D, Pa reported at least one contributing factor for TMD (p<0.05). The percentage of subjects who responded that they had at least one TMD symptom or one contributing factor for TMD was significantly different among three groups divided by T-score on Si (p<0.01, p<0.05). T-scores of Hs, D, Hy, Pt and Sc showed significant correlation with the numbers of TMD symptoms and contributing factors for TMD, respectively (p<0.001). A correlation was found between T-score of Pd and the number of TMD symptoms (p<0.001). T-score of Si correlated to the number of contributing factors for TMD (p<0.001). Conclusions: Most clinical scales of MMPI-2 were found to be related to TMD. Psychological assessment including MMPI-2 may play a role in predicting treatment outcome and planning treatment of TMD.

• Korean Journal of Metals and Materials
• /
• v.48 no.10
• /
• pp.951-956
• /
• 2010

This study examined the effect of copper and sulfuric acid concentrations on the surface morphology and physical properties of copper plated on a polyimide (PI) film. Electrochemical experiments with SEM and a four-point probe were performed to characterize the morphology and mechanical characteristics of copper electrodeposited in the composition of an electrolyte. The resistivity and peel strength were controlled using a range of electrolyte compositions. A lower resistivity and high flexibility were obtained when an electrolyte with 20 g/l of copper was used. However, a uniform surface was obtained when a high current density that exceeded $20mA/cm^2$ was applied, which was maintained at copper concentrations exceeding 40 g/l. Increasing sulfuric acid to >150 g/l decreased the peel strength and flexibility. The lowest resistivity and fine adhesion were detected at a $Cu^{2+}:H_2SO_4$ ratio of 50:100 g/l.

• Journal of Oral Medicine and Pain
• /
• v.42 no.1
• /
• pp.8-15
• /
• 2017

Purpose: The purpose of this study was to assess the association of vocational interest and personality with temporomandibular disorders (TMD). Methods: Four hundred and fourteen college students in Gyeonggi-do completed Vocational Preference Inventory L form and a questionnaire and collected data were analyzed by R program. Results: The percentage of subjects who responded that they had at least one contributing factor for TMD was significantly different among 27 two-letter Holland codes (p<0.05). The two-letter Holland codes of which the first-letter was social (S) (S artistic [A], S investigative [I], S realistic [R], S conventional [C], S enterprising [E]) or C (CE, CS, CA, CI) had tendency of having the relatively higher prevalence of symptoms and contributing factors for TMD. Among 6 one-letter Holland codes, the prevalence of a symptom of frequent fatigue in the jaw and a habit of gum chewing showed the significant difference (p<0.05). E code seemed to have lower prevalence of a symptom of frequent fatigue in the jaw than other codes. S code appeared to use chewing gum more frequently than other codes. High scorers on emotional instability showed the significantly higher prevalence of TMD symptoms (p<0.05) and contributing factors for TMD (p<0.001) than low scorers. Furthermore, high scorers on emotional instability had significantly higher mean scales of the number of positive answers of TMD symptoms (p<0.01) and of contributing factors for TMD (p<0.001) than low scorers. Conclusions: Symptoms and contributing factors for TMD were related to emotional instability. Vocational Preference Inventory L form might be utilized in assessing emotional factors of persons with TMD symptoms.

• Journal of Periodontal and Implant Science
• /
• v.50 no.6
• /
• pp.392-405
• /
• 2020

Purpose: Titanium implants are widely used in the treatment of dentition defects; however, due to problems such as osseointegration failure, peri-implant bone resorption, and periimplant inflammation, their application is subject to certain restrictions. The surface modification of titanium implants can improve the implant success rate and meet the needs of clinical applications. The goal of this study was to evaluate the effect of the use of porous titanium with a chitosan/hydroxyapatite coating on osseointegration. Methods: Titanium implants with a dense core and a porous outer structure were prepared using a computer-aided design model and selective laser sintering technology, with a fabricated chitosan/hydroxyapatite composite coating on their surfaces. In vivo and in vitro experiments were used to assess osteogenesis. Results: The quasi-elastic gradient and compressive strength of porous titanium implants were observed to decrease as the porosity increased. The in vitro experiments demonstrated that, the porous titanium implants had no biological toxicity; additionally, the porous structure was shown to be superior to dense titanium with regard to facilitating the adhesion and proliferation of osteoblast-like MC3T3-E1 cells. The in vivo experimental results also showed that the porous structure was beneficial, as bone tissue could grow into the pores, thereby exhibiting good osseointegration. Conclusions: Porous titanium with a chitosan/hydroxyapatite coating promoted MC3T3-E1 cell proliferation and differentiation, and also improved osseointegration in vitro. This study has meaningful implications for research into ways of improving the surface structures of implants and promoting implant osseointegration.

• Korean Journal of Metals and Materials
• /
• v.49 no.8
• /
• pp.657-663
• /
• 2011

This study represents the results of the peel strength and surface morphology according to the preprocessing times of polyimide (PI) in a Cu/Ni/PI structure flexible copper clad laminate production process based on the polyimide. Field emission scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were used to analyze the surface morphology, crystal structure, and interface binding structure of sputtered Ni, Cu, and electrodeposited copper foil layers. The surface roughness of Ni, Cu deposition layers and the crystal structure of electrodeposited Cu layers were varied according to the preprocessing times. In the RF plasma times that were varied by 100-600 seconds in a preprocessing process, the preprocessing applied by about 300-400 seconds showed a homogeneous surface morphology in the metal layers and that also represented high peel strength for the polyimide. Considering the effect of peel strength on plastic deformation, preprocessing times can reasonably be at about 400 seconds.