• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.27-33
• /
• 2002

MDO(Multidisciplinary Design Optimization) methodology is a new technology to solve a complicate design problem with a large number of design variables and constraints. The design of a dental implant system is a typical complicate problem, and so it requires the MDO methodology. Actually, several analyses such as rigid body dynamic analysis and structural stress analysis etc. should be carried out in the MDO methodology application to the design of a dental implant system. In this paper, as a first step of MDO methodology application to the design of a dental implant system, the impact force which is applied on the tooth in masticating is calculated through the rigid body dynamic analysis of upper and lower jaw-bones. This analysis is done using ADAMS. The impact force calculated through the rigid body dynamic analysis can be used for the structural stress analysis of a dental implant system which is needed for the design of a dental implant system. In addition, the rigid body dynamic analysis results also show that the impact time decreases as the impact force increases, the largest impact force occurs on the front tooth, and the impact force is almost normal to the tooth surface with a slight tangential force.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권1호
• /
• pp.1-8
• /
• 2023

Backgrounds: Pain management is one of the most important factors affecting the success of pediatric dentistry. Therefore, new needle- and pain-free local anesthesia techniques have been developed in parallel with technological advancements. The purpose of this study is to compare the pain perception and dental anxiety levels associated with a needle-free injection system (Comfort-in^TM) and the classic needle method during treatment-required infiltration anesthesia in children. Methods: This randomized controlled crossover split-mouth clinical study included 94 children who required dental treatment with local anesthesia using a dental needle or needle-free injection system for the bilateral primary molars. The Wong-Baker Scale (WBS) was used to measure pain perception at different times, and the Modified Child Dental Anxiety Scale (MCDAS) was used to measure the anxiety level of the child. A statistical software package was used to process the data. Statistical significance was set at P < 0.05. Results: There was no significant difference between the needle-free injection system and dental needle method during the induction stage for filling and pulpotomy (P > 0.05). "Pain on postoperative 1st day" was similar in both types of anesthesia (P = 0.750). Conclusions: The needle-free injection system was as effective as the dental needle method. The Comfort-in^TM system was an acceptable alternative for patients during the postoperative period. Understanding how pain management may be provided during local anesthesia administration and a child's fear and anxiety regarding the dentist may lead to better dental compliance.

• 치위생과학회지
• /
• 제17권3호
• /
• pp.193-201
• /
• 2017

This study was conducted to derive core and detailed competencies of dental hygienists to be utilized as educational targets to be reached by graduation as well as basic data that can be reflected in the development and improvement of dental hygiene curricula. This study analyzed publication reports from the Korean Dental Hygienists Association, the International Federation of Dental Hygienists, the Commission on Dental Accreditation, and the American Dental Education Association. Based on the academic classification system for dental hygiene studies, the components of core and detailed competencies of dental hygiene school at the time of graduation were extracted and developed through expert panel discussions. This study defined competencies at the graduation level of dental hygiene school and derived eight core competencies and their 52 detailed competencies to serve as educational objectives from four areas: professionalism, communication, clinical practice, and community and health promotion. In the future, it will be necessary to conduct self-assessments of competencies based on those developed in this study, at time of the graduation from dental hygiene school, as well as to continuously develop competency-based curricula according to entry level, knowledge level, and graduation level. Thus, it is urgently necessary to develop a system that can evaluate the competencies of dental hygienists after graduation and put this system into practical use.

• Imaging Science in Dentistry
• /
• 제47권1호
• /
• pp.51-55
• /
• 2017

Purpose: This study was conducted to suggest the development of a learning management system for dental radiology education using the Modular Object-Oriented Dynamic Learning Environment(Moodle). Materials and Methods: Moodle is a well-known and verified open-source software-learning management system (OSS-LMS). The Moodle software was installed on a server computer and customized for dental radiology education. The system was implemented for teaching undergraduate students to diagnose dental caries in panoramic images. Questions were chosen that could assess students' diagnosis ability. Students were given several questions corresponding to each of 100 panoramic images. Results: The installation and customization of Moodle was feasible, cost-effective, and time-saving. By having students answer questions repeatedly, it was possible to train them to examine panoramic images sequentially and thoroughly. Conclusion: Based on its educational efficiency and efficacy, the adaptation of an OSS-LMS in dental school may be highly recommended. The system could be extended to continuing education for dentists. Further studies on the objective evaluation of knowledge acquisition and retention are needed.

• 대한치과기공학회지
• /
• 제20권1호
• /
• pp.13-19
• /
• 1998

This study was performed to identify the current problem of The National Qualification Examination for Dental Technician and to provide suggestion for improvement of The National Qualification Examination System. This study was based on the questionaries answered by the professors in the department of dental technology of college and the members of Korea dental technician's society. The result could be summarized in the following. 1. The examination should be held not only in Seoul but in other areas simultaneously. 2. Prepartation of The National Qualification Examination should be entrusted to a committee composed of selected members of The Korea Dental Technician Association and selected members of professors in the department of dental technology. 3. The carrving practical examination should be continued and the method of grading should be change to ensure fairness, objectivity and balance. Specially colored wax can be used to prevent cheating in test. 4. The examination on the subject of "The Introduction Dental Anatomy" should be different for dental technicians and dental hygienists. And the subjects need to be divided into "Dental Morphology" and "Oral Anatomy".

• The Journal of Advanced Prosthodontics
• /
• 제15권5호
• /
• pp.271-280
• /
• 2023

PURPOSE. This in vitro study aimed to compare the accuracy of the conventional facebow system and the newly developed POP (PNUD (Pusan National University Dental School) Occlusal Plane) bow system for occlusal plane transfer in asymmetric ear position. MATERIALS AND METHODS. Two dentists participated in this study, one was categorized as Experimenter 1 and the other as Experimenter 2 based on their clinical experience with the facebow (1F, 2F) and POP bow (1P, 2P) systems. The vertical height difference between the two ears of the phantom model was set to 3 mm. Experimenter 1 and Experimenter 2 performed the facebow and POP bow systems on the phantom model 10 times each, and the transfer accuracy was analyzed. The accuracy was evaluated by measuring the angle between the reference virtual plane (RVP) of the phantom model and the experimental virtual plane (EVP) of the upper mounting plate through digital superimposition. All data were statistically analyzed using a paired t-test (P < .05). RESULTS. Regardless of clinical experience, the POP bow system (0.53° ± 0.30 (1P) and 0.19° ± 0.18 (2P) for Experimenter 1 and 2, respectively) was significantly more accurate than the facebow system (1.88° ± 0.50 (1F) and 1.34° ± 0.25 (2F), respectively) in the frontal view (P < .05). In the sagittal view, no significant differences were found between the POP bow system (0.92° ± 0.50 (1P) and 0.73° ± 0.42 (2P) for Experimenter 1 and 2, respectively) and the facebow system (0.82° ± 0.49 (1F) and 0.60° ± 0.39 (2F), respectively), regardless of clinical experience (P > .05). CONCLUSION. In cases of asymmetric ear position, the POP bow system may transfer occlusal plane information more accurately than the facebow system in the frontal view, regardless of clinical experience.

• 대한치과의사협회지
• /
• 제21권12호통권175호
• /
• pp.997-1003
• /
• 1983

The author studied the quality and change of the effective demand for dental treatment of the cutpatients of the Wonkwang dental clinic from the March of 1982 to the August of 1983. The results were compared with the previous reports to find any changes that might come from the effect of dental insurance system. After discussing the results, the author concluded as follows: 1. The twenties were the most in the age groups, but it is desirable that age groups of mixed dentition be the most to enhance the dental health status of community. 2. The effective demand for dental treatment increased especially in the areas such as intraoral radiograph taking, amalgam filling, temporary filling, endodontic treatments, and drug application on the soft tissue, but decreased in the areas such as prosthodontic treatments, and there were no demand for the orthodontic treatment. 3. As compared with the absolute needs, the effective demand was relatively high for teeth extraction and amalgam filling, but it was generally very low. 4. So, the present extent of dental insurance system should be expanded, and the dental care delivery system should be established within the community. Finally, the economic and social status of Iri community should be enhance by political and educational plannings.

• 한국치위생학회지
• /
• 제18권5호
• /
• pp.643-652
• /
• 2018

Objectives: The purpose of this study was to review the systems used to evaluate dental hygiene education and to establish priorities for the evaluation index for accreditation to enhance competitiveness and facilitate quality control of dental hygiene education. Methods: A survey of priorities for accreditation evaluation was developed based on input from professors at 43 universities. Data were analyzed using the Analytic Hierarchy Process method with Expert Choice 2000 software. Results: The relative importance of each evaluation area, ranked in descending order, was as follows: vision and operating system; administration and finances; facilities and equipment; educational outcomes; professors; educational process; and students. The importance of the evaluation part was highest in field training at the education process part and scholarship at the student part. The importance after applying complex weights was highest in establishing a development plan for the vision and operating system. Conclusions: Practical accreditation evaluation based on objectivity and validity is needed to control the quality of dental hygiene education. Therefore, priorities in accreditation evaluation standard must be determined to establish a basis for quality improvement in education at dental hygiene departments.

• 대한치과기공학회지
• /
• 제40권4호
• /
• pp.231-237
• /
• 2018

Purpose: The development of the dental technology industry has digitized the dental process. Definition of Digitalization of Dental Implantation Digitalization is the process of model making and prosthodontic processing using 3D CAD and CAM. Currently, it is becoming popular due to the spread of various devices. However, precision evaluation at this stage is an important factor in precision-based dental procedures. Therefore, in this study, we want to analyze the precision of the processed body made with digital dental machine. Methods: The accuracy of digital dental pore devices was evaluated. Specimens were fabricated with 5 types of 3D printers. The external shape was measured with the prepared specimen. The surface roughness was measured. Results: As a result, precision was excellent in order of EP2 specimen, EP1 specimen, and EA2 specimen. The precision of EP3 specimen and EA1 specimen is not excellent. And the precision of the specimen processed with polymer 3D printer is excellent. The accuracy of LCPS type polymer 3D printers is considered to be excellent. Conclusion : 1. Observation of the shape The 3D printer for LCPS system and the 3D printer for SLM $40{\mu}m$ system were found to be precisely processed. 2. Surface roughness results The LCPS system polymer 3D printer has been shown to have a precise surface.

• 한국콘텐츠학회논문지
• /
• 제12권1호
• /
• pp.379-385
• /
• 2012

본 연구는 최근 들어 급속히 보급이 확산된 스마트폰을 이용하여 이를 치료실과 기공소간의 정보공유체계와 연계 활용하는 방안을 제시하는 것이 목적이다. 이를 위해 최근 모바일 플랫폼 기반의 개발환경을 소개하고 안드로이드 기반의 환자정보 공유체계의 주요 기능을 정의하여 이를 사용자 인터페이스의 설계를 통해 구현 하였다. 이를 실무에 적용한 결과 다음과 같은 결과를 얻을 수 있었다. 1. 스마트폰 등 현재 이슈가 되고 있는 정보화 기반기술을 치기공계에 적용할 수 있는 가능성을 제시하였다. 2. 환자의 구강에 대한 영상촬영 시 카메라와 PC를 연결하여 전송하는 프로세스를 개선함으로서 치료 실내의 정보 활용성이 개선되었다. 3. 환자의 구강정보는 촬영 즉시 서버로 전송되므로 영상화일의 오류를 저감할 수 있었다. 4. 임상에서의 보철물 제작 시 스마트폰에 보철물 이미지를 표출한 상태로 작업함으로서 작업의 효율성이 개선되었다.