• Journal of Korean society of Dental Hygiene
• /
• v.5 no.2
• /
• pp.247-261
• /
• 2005

The main objective of this study is to investigate the factors affecting patient satisfaction, repeat-use intention, and inducement intention for providing the suggestion for patient-oriented management of dental services organizations. For this study, the patient satisfaction model including 14 facets of satisfaction factors such as distance(time/location), human services(dentist-hygienist), treatment results, and facilities(convenient facilities/parking lot) was examined. Data were collected from 196 patients who visiting the same dental services organization more than two times of ten dental clinics at Kyeongsangnam-do area using self-administered questionnaire. Major results of the empirical analysis are as follows: First, patient satisfaction, repeat-use intention, and inducement intention were significantly correlated with gender, age, economic conditions among patients of dental clinics. Second, kindness of hygienist, treatment results, kindness of receptionist, waiting time, emergency medical services, and right-fee for services were found to have significant influence on dental services organizations. These research findings suggest that improvement of service quality in dental care and advancement in treatment ability of dentist and hygienist are very important to improve patient satisfaction and patient-oriented service system in dental services organizations.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.3
• /
• pp.409-419
• /
• 2019

Objectives: The purpose of this study was to analyze the factors affecting antibiotic prescription in dental outpatients. Methods: The present study was conducted using data from the National Health Insurance Service - National Sample Cohort. We analyzed prescriptions issued in the dental outpatient department in 2015, for adults over 19 years of age. Antibiotic prescription rates and mean prescription days were analyzed by sex, age, insurance type, presence of diabetes mellitus and hypertension, season in treatment, type of dental institution, and location of dental institution. Multivariate logistic regression was also performed to analyze the factors affecting antibiotic prescription in dental outpatients. Results: A total of 257,038 prescriptions were analyzed. The mean prescription days of antibiotics in dental outpatients were $3.04{\pm}1.08days$, and the prescription rate was 93.0%. Two variables (presence of diabetes mellitus and insurance type) were excluded from the multivariate logistic regression analysis model because they did not significantly affect antibiotic prescription. The possibility of antibiotic prescription was higher in men ${\geq}61years$ of age and those with hypertension. Furthermore, antibiotics were most frequently prescribed in dental clinics rather than dental hospitals, and more frequently in Busan compared to other areas (p<0.001). Conclusions: Several factors were determined to affect antibiotic prescription, and detailed guidelines for consistent antibiotic prescription are needed.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.3
• /
• pp.219-223
• /
• 2016

PURPOSE. This study aimed to create a digitized database of fabricated obturators to be kept for patients' potential emergency needs. MATERIALS AND METHODS. A chairside intraoral scanner was used to scan the surfaces of an acrylic resin obturator. The scanned data was recorded and saved as a single standard tessellation language file using a three-dimensional modeling software. A simulated obturator model was manufactured using fused deposition modeling technique in a three-dimensional printer. RESULTS. The entire obturator was successfully scanned regardless of its structural complexity, modeled as three-dimensional data, and stored in the digital system of our clinic at a relatively small size (19.6 MB). A simulated obturator model was then accurately manufactured from these data. CONCLUSION. This study provides a proof-of-concept for the use of digital technology to create a digitized database of obturators for edentulous maxillectomy patients.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.296-305
• /
• 2016

This paper proposes a framework to automatically align Dental range image captured by depth sensors like the Microsoft Kinect. Aligning dental images by intraoral scanning technology is a difficult problem for applications requiring accurate model of dental-scan datasets with efficiency in computation time. The most important thing in dental scanning system is accuracy of the dental prosthesis. Previous approaches in intraoral scanning uses a Z-buffer ICP algorithm for fast registration, but it is relatively not accurate and it may cause cumulative errors. This paper proposes additional Alignment using the rough result comes after intraoral scanning alignment. It requires that Each Depth Image of the total set shares some overlap with at least one other Depth image. This research implements the automatically additional alignment system that aligns all depth images into Completed model by computing a network of pairwise registrations. The order of the each individual transformation is derived from a global network and AABB box overlap detection methods.

• Tribology and Lubricants
• /
• v.37 no.4
• /
• pp.136-143
• /
• 2021

This paper presents the loosening behavior that occurs after the application of an external load to internal and external connection types of dental implants using the finite element method. We use fastening force between an abutment and a fixture to clamp the dental implant system; however, loosening and breakage may occur owing to cyclic external loads. In this study, we considered the initial fastening condition in the pre-load analysis and then investigated the change in stress and contact surface status when applying external loads. After the application of the initial fastening load, we verified that the internal connection-type model exhibited a relatively lower stress distribution than that of the external connection-type one. Moreover, we found that the former model showed a lower stress concentration after the application of the external load. In addition, after the application of this load, we found that the higher the shear load acting on the implant system, the higher the possibility of loosening. The study results showed the change in stress distribution and contact surface according to the connection type of the dental implants and the phenomenon of loosening by cyclic loads. We expect that the results of this study will be useful for the study of reliability and design of dental implant systems.

• Journal of Korean Dental Science
• /
• v.14 no.2
• /
• pp.51-60
• /
• 2021

Purpose: Measuring viability of a three-dimensional in vitro organotypic human oral tissue model has been suggested as an alternative test method to the oral mucosa irritation test of oral care products. The aim of this study was to investigate the production of two different cytokines using organotypic human oral tissue model following exposure to chemicals that are commonly used in oral care products. Materials and Methods: The organotypic human oral tissues were exposed to ethanol, sodium lauryl sulphate or hydrogen peroxide for 90 minutes. Following exposure, interleukin (IL)-1α and IL-8 productions were assessed and correlated with cell viability testing as well as histology of the organotypic human oral tissues. Result: High levels of IL-8 were released from organotypic human oral tissues in all of the test and control groups without any significant differences between them. In contrast, differences were found in IL-1α release between the test and control groups. Additionally, the trend of IL-1α release corresponded to the phenotypes observed in histological analysis while different trend existed between IL-1α release and cell viability. Conclusion: The study concluded the non-specific release of IL-8 for the assessment of oral care product chemicals' toxicity, while potential of measuring IL-1α cytokine level as the possible alternative test method.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.43.1-43.5
• /
• 2019

Background: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model. Case presentation: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. Conclusion: We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.

• Journal of dental hygiene science
• /
• v.17 no.1
• /
• pp.38-45
• /
• 2017

We evaluated the association between sleep duration, dental caries, and periodontitis by using representative nationwide data. We examined 8,356 subjects aged ${\geq}19$ years who participated in the sixth Korea National Health and Nutrition Examination Survey (2013~2014). Sleep duration were grouped into ${\leq}5$, 6, 7, 8, and ${\geq}9$ hours. Presence of dental caries was defined as caries in ${\geq}1$ permanent tooth on dental examination. Periodontal status was assessed by using the community periodontal index (CPI), and a CPI code of ${\geq}3$ was defined as periodontitis. A chi-square test and multiple logistic regression analysis were used to determine statistical significance. Model 1 was adjusted for age and sex, model 2 for household income, educational level, and marital status plus model 1, and model 3 for smoking status, alcohol consumption, blood pressure level, fasting blood glucose level, total cholesterol level, and body mass index plus model 2. The prevalence of dental caries according to sleep duration showed a U-shaped curve of 33.4%, 29.4%, 28.4%, 29.4%, and 31.8% with ${\leq}5$, 6, 7, 8, and ${\geq}9$ hours of sleep, respectively. In the fully adjusted model 3, the risk of developing dental caries was significantly higher with ${\leq}5$ than with 7 hours of sleep (odds ratio, 1.23; 95% confidence interval, 1.06~1.43). The prevalence of periodontitis according to sleep duration showed a U-shaped curve of 34.4%, 28.6%, 28.1%, 31.3%, and 32.5%, respectively. The risk of periodontitis was significantly higher with ${\geq}9$ than with 7 hours of sleep in models 1 and 2, whereas the significant association disappeared in model 3. In a nationally representative sample, sleep duration was significantly associated with dental caries formation and weakly associated with periodontitis. Adequate sleep is required to prevent oral diseases such as dental caries and periodontitis.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.564.2-564
• /
• 2001

For the purpose of explaining the mechanism of tooth discoloration caused by tetracycline (TC), a study was conducted by setting up the following in vitro system. Being evaluated were the TC concentration to give an optimum reaction state when it acted on hydroxyapatite(HA) granules and the absorbing wavelength of TC that had been irradiated with ultraviolet (UV) rays.(omitted)

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.