• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.82-96
• /
• 2018

3D printing is a process of producing 3d object from a digital file in STL format by joining, bonding, sintering or polymerizing small volume elements by layer. The various type of 3d printing is classified according to the additive manufacturing strategies. Among the types of 3D printer, SLA(StereoLithography Apparatus) and DLP(Digital Light Processing) 3D printer which use polymerization by light source are widely used in dental office. In the previous study, a full-arch scale 3d printed model is less precise than a conventional stone model. However, in scale of quadrant arch, a 3d printed model is significantly precise than a five-axis milled model. Using $3^{rd}$ Party dental CAD program, full denture, provisional crowns and diagnostic wax-up model are fabricated by 3d printer in dental office. In Orthodontics, based on virtual setup model, indirect bracket bonding tray can be generated by 3d printer. And thermoforming clear aligner can be fabricated on the 3d printed model. 3D printed individual drilling guide enable the clinician to place the dental implant on the proper position. The development of layer additive technology enhance the quality of 3d printing object and shorten the operating time of 3D printing. In the near future, traditional dental laboratory process such as casting, denture curing will be replaced by digital 3D printing.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.15 no.1
• /
• pp.55-59
• /
• 2019

Pierre Robin sequence(PRS) is characterized by a triad of clinical signs: micrognathia, glossoptosis and cleft palate. These anatomical deformities of PRS predispose patients to respiratory problems and feeding difficulties at birth. Maintaining oral hygiene and enduring dental treatment are complicated by their general conditions of PRS patients. We present a case of dental treatment of PRS patient under general anesthesia. A 3-year-old boy with PRS visited Seoul National University Dental Hospital for caries treatment. Clinical and radiographic examinations revealed multiple carious lesions. Considering the patient's medical condition and compliance of treatment, dental treatment under general anesthesia was decided. Despite expected challenges of managing the airway of the patient, intubation was performed successfully. The patient was treated with pulp treatments and restorations using composite resin and stainless steel crowns. No complications were observed during and after the procedure.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.317-322
• /
• 2016

Mineral trioxide aggregate (MTA) is widely used in endodontic therapy as a pulp-capping material, root or furcal perforation repair material, and for apexification and obturation of the root canal system. The purpose of this study was to formally document cases of MTA application in South Korean children and adolescents. Through this research, the practice of using MTA will be introduced and familiarized to the clinical practitioners. This study involved endodontic treatment using MTA for fractured crowns in 11- and 12-year-old. The children were followed up for 12 months until the pulp vitality was confirmed; in young permanent teeth with immature roots, the pulp is integral to the process of apexogenesis. These observational results regarding the use of MTA as an apexification material in non-vital immature permanent incisors appear to provide promising results in the search for new materials to meet existing endodontic needs.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.2
• /
• pp.71-78
• /
• 2014

PURPOSE. The objective of this study was to evaluate the clinical acceptability of all-ceramic crowns fabricated by the digital veneering method vis-$\grave{a}$-vis the traditional method. MATERIALS AND METHODS. Zirconia specimens manufactures by two different manufacturing method, conventional vs digital veneering, with three different thickness (0.3 mm, 0.5 mm, 0.7 mm) were prepared for analysis. Color measurement was performed using a spectrophotometer for the prepared specimens. The differences in shade in relation to the build-up method were calculated by quantifying ${\Delta}E^*$ (mean color difference), with the use of color difference equations representing the distance from the measured values $L^*$, $a^*$, and $b^*$, to the three-dimensional space of two colors. Two-way analysis of variance (ANOVA) combined with a Tukey multiple-range test was used to analyze the data (${\alpha}$=0.05). RESULTS. In comparing means and standard deviations of $L^*$, $a^*$*, and $b^*$ color values there was no significant difference by the manufacturing method and zirconia core thickness according to a two-way ANOVA. The color differences between two manufacturing methods were in a clinically acceptable range less than or equal to 3.7 in all the specimens. CONCLUSION. Based on the results of this study, a carefully consideration is necessary while selecting upper porcelain materials, even if it is performed on a small scale. However, because the color reproducibility of the digital veneering system was within the clinically acceptable range when comparing with conventional layering system, it was possible to estimate the possibility of successful aesthetic prostheses in the latest technology.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.169-179
• /
• 1984

The purpose of this study was to observe the effect of dental varnish applied with fluoride to dental pulp by comparing the groups of commercial fluoride product $Duraphat^{(R)}$, $Copalite^{(R)}$ after 1 Mole sodium fluoride application, Cavity $Sealer^{(R)}$ after 1 Mole sodium fluoride application with the control group not applied the dental varnish. After Cl V Cavity form was prepared on the buccal surface of the crowns with the total 75 teeth by using 5 dogs, average weight of 13.2Kg, dental varnish and silver analgram were placed. This study was performed by 3, 7, 21, 28, 56 days each. The dogs were sacrificed to extract the teeth, cut at the apical one fourth, and prepared histologic examination by fixing with 10% buffered formalin perfusion at sacrifice and decalcification in 10% nitric acid. The specimens were embedded in paraffin, stained with Hematoxylin and Eosin, and serially sectioned with 6 ${\mu}$width each. Microscopic evaluation of serial sections at the various time periods among the different groups revealed the following results: 1. In the control group, the marked change of the odontoblastic layer was showed on the 3 days group, and it was decreased gradually. Healing response, such as hyperplasia, was seen on the 28 days group and it was continued to the 56 days group. 2. In the experimental group with Cavity $Sealer,^{(R)}$ a slight hemorrhage was seen in the odontoblastic layer on the 3 days group, and the healing response with the hyperplasia of the odontoblast was showed on the 21, 28 days group. It was completely healed on the 56 days group. 3. In the Duraphat R group, a slight hemorrhage showed on the 3 days group and the disarrangement of the Odontoblastic layer was seen on the 7, 21, 28 days group. Odontoblasts showed hyperplasia on the 28 days group, and healed completely on the 56 days group. 4. In the $Copalite^{(R)}$ group, the 7 days group showed remarkable hemorrhage in the odontoblastic layer and stroma, and also it showed reticular degeneration with the disarrangement of the odontoblastic layer and congestion. Each group showed disarrangement. Healing ability of this group was greater than that of the control group, but less than that of the $Duraphat^{(R)}$ and Cavity $Sealer^{(R)}$ group.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.27-35
• /
• 2007

Stainless steel crowns are invaluable restorative material for the treatment of badly broken down primary teeth in pediatric dentistry. But it is difficult to fit margin because selection of size is not easy and they are not adjusted for Korean children. The purpose of this study was to examine and analyze the marginal adaptation of stainless steel crown of posterior primary tooth. Marginal surface was taken by Fine Pix S602 digital camera and measurements of crown were recorded at 20 points that were randomly selected for marginal gap evaluation by Kappa image base program. 1. Mean marginal gap were large upper 2nd primary molar, lower 1st primary molar, lower 2nd primary molar, upper 1st primary molar in order(p<0.05). 2. Mean marginal surface dimension ratio was more than 20% irrespective of tooth. 3. Largest amount of marginal gap was shown at mesial surface in upper 1st, 2nd primary molar and distolingual surface in lower 1st primary molar, buccal surface in lower 2nd primary molar.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.15 no.1
• /
• pp.74-78
• /
• 2019

Atypical teratoid rhabdoidal tumor(AT/RT) is a rare and fast-growing tumor usually diagnosed in childhood. Routine magnetic resonance imaging(MRI) assessment of AT/RT patients is done to detect metastatic tumors and recurrent lesions. The purpose of this case report is to present a case about caries treatment of a 3-year-8-month old female patient with AT/RT under general anesthesia. A 3-year-8-month old patient with AT/RT visited Seoul National University Dental Hospital for caries treatment. At the first dental visit, she was receiving chemotherapy. Multiple caries were observed from clinical and radiographic examination. The dental procedure was successfully performed under general anesthesia. Patients with brain tumor may take routine MRI to detect metastatic tumors and recurrent lesions. Dentists should take into consideration of possible dislodgement of restoration by ferromagnetic properties and artifact formation on MRI image. Ready-made zirconia crowns can be a good restoration option for such patients.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.403-415
• /
• 2009

The purpose of the study is to establish the effect of different abutment shapes and types of cements on the retention of the full veneer casted gold crowns. Metal dies that has the similar shape with the implant abutment were manufactured using a short(5mm) and long(10mm) dies with different convergence angles. Metal dies and gold crowns, which were made from the metal dies, were cemented with Temp-bond, Temp-bond mixed with petroleum jelly, ZPC and Premier implant cement. After that, these were tested for tensile force at the point of separation. The effect of convergence angle changes of different cement types on the retention was studied as well as the effects of the cement type changes with different convergence angles on the retention. In addition, study about the marginal gap of Premier implant cement used for this experiment was conducted. The results are as followed under the in-vitro experimental limits; 1. The retention of the Temp-bond mixed with petroleum jelly decreased as the convergence angle increased, and the retention was weakest among the cements. 2. The retention of ZPC decreased as convergence angle increased. When convergence angle was 5 degrees, ZPC showed stronger retention than Premier implant cement. 3. Premier implant cement had the weakest retention when the convergence angle was 5 degrees but when the convergence angle was 10 degrees, it had the strongest retention. As the angle increased more than 10 degrees, the retention decreased. 4. Premier implant cement showed bigger marginal gap when the convergence angle was 5 degrees than 10 degrees under the experimental condition.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.84-90
• /
• 2006

The aims of this study were to investigate the prevalence of spaced, closed, and crowded primary dentitions by sex and arch in Korean children from Kanghwa, and to determine the frequency of the primate and developmental spaces. The differences in the mesiodistal crown diameters and the arch dimensions between the spaced, closed, and crowded primary dentitions were also evaluated. Dental casts of 102 preschool children (57 males and 45 females, aged $4{\sim}5$ years) were studied. The prevalence of spacing in the primary dentition was 63.2% In males and 57.8% in females. The frequency of spacing was greater in males than in females, and greater in the maxillary arch than in the mandibular arch. The crowns were significantly larger and the arches significantly narrower in closed and crowded dentitions than in those with spacing (p<0.05). The results showed that the prevalence of spacing was lower than that found in previous studies and the presence of spacing in the anterior region was related to the mesiodistal crown diameter and the intercanine width.