• Journal of The Korean Dental Society of Anesthesiology
• /
• v.10 no.1
• /
• pp.54-57
• /
• 2010

Foreign body aspiration (FBA) into the tracheobronchial tree could be life threatening requiringprompt intervention. Any objects placed in the oral cavity put patients at a risk of aspirating or swallowing the objects slipped or broken by physical injuries. Here, we report a case of 30 yr old patient with FBA during gold crown replacement was successfully treated with the use of the flexible bronchoscope. Case: A 30 yr old woman was admitted to Seoul National Dental Hospitalfor an amalgam restoration. She was scheduled to gold crown restoration for replacement of the damaged amalgam at #37 site. After performing crown lengthening procedure, the aspiration of gold crown occurred during the cementation of the crown. After aspiration, the patients complained of the subjective distress of respiration. Chest radiograph revealed that gold crown was enlodged to the left bronchus. Flexible fiberoptics was inserted to the bronchus to remove the aspirated crown. Fiberoptic assisted removal of the aspiratedcrown was successfully performed. After removal, there was no radiopaque material in the left bronchus on follow-up chest radiograph. Discussion: When aspiration of dental materials occurs, flexible fiberoptic can be used in the treatment of FBA. It is also very useful to take preventive management such as rubber dam, application of dental floss in dental procedure where there is high likelihood of FBA.

• The Journal of the Korean dental association
• /
• v.20 no.3 s.154
• /
• pp.233-237
• /
• 1982

A review of the literature was presented, illustrating the effect that gingivally retained orthodontic elastic bands have on the periodontal tissues. A case report was presented for treatment of mobile maxillary central incisors secondary to a subgingival elastic band. Following surgical removal of elastic band and periodontal debridement, the teeth were successfully retained with active orthodontic appliances. Until a harmless radiopaque medium can be safely incorporated into elastic bands, extreme caution in their use should be observed. Not only should all attempts be made to anchor the elastic bands to the clinical crown, but the patient should receive through instructions in their placement and removal.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.3
• /
• pp.221-227
• /
• 2010

The most common local cause of active gingival bleeding is the vessel engorgement and erosion by severe inflammation. Abnormal gingival bleeding is also associated with the systemic disturbances. Hemorrhagic disorders in which abnormal gingival bleeding is encountered include the following: vascular abnormalities (vitamin C deficiency or allergy), platelet disorders, hypoprothrombinemia (vitamin K deficiency resulting from liver disease), and other coagulation defects (hemophilia, leukemia). There are many conventional methods for gingival bleeding control, such as, direct pressure, electrocoagulation, direct suture, drainage, application of hemostatic agents and crushing and packing. If the active continuous gingival bleeding is not stopped in spite of the application of all conventional bleeding control methods, the life of patient is threatened owing to upper airway obstruction, syncope, vomiting and hypovolemic shock. Therefore, the rapid and correct hemostatic method is very important in the emergency dental care. This is a case report of active gingival bleeding care via dental crown removal and emergency primary endodontic drainage as a last method in liver cirrhosis patient with advanced periodontitis.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.317-325
• /
• 1995

This study was performed to investigate the mean life expectancy of dental prosthetic restorations. The author has examined 352 dental prosthesis clinically and radiologically, and decided the success(survival) and failure(mortality) of the dental prosthesis. The dental prosthesis which had been treated in the Seoul National University Dental Hospital, two private clinics in Seoul, one university dental hospital, and two private clinics in local province were included in this study. The survival analysis using product limit estimator was used and the mean life expectancy of each type of dental prosthesis was calculated. The results were as follows : 1. The life expectancies were 10.5 years in gold crown and bridge, 8.5 years in porcelain fused to metal crown and bridge, 8.3 years in nonprecious metal crown and bridge, 8.1 years in removal partial denture, and 7.7 years in full denture. 2. The causes of mortality were in the order of dental caries(24.6%), fracture of dental prosthesis(19.2%), periodontal problems(18.6%), chronic chewing difficulty and dysfunction due to dental prosthesis(15.0%), excessive exposure of abutments due to the marginal defect of dental prosthesis(14.4%), abnormal occlusion due to severe attrition of artificial teeth in dentures(3.0%), periapical problems(2.4%), perforation of dental prosthesis(1.8%), and loose contacts with neighboring tooth(1.2%). 3. Among survival cases, 66.5% showed normal chewing ability and 31.9% showed partial chewing ability. However, 1.6% of them complained loss of chewing ability. 4. Among failure cases, 6.6% showed normal chewing ability and 38.9% showed partial chewing ability. However, 54.5% of them complained loss of chewing ability.

• Journal of dental hygiene science
• /
• v.14 no.2
• /
• pp.264-268
• /
• 2014

There are a lot of dental emergency situation. Especially on disabled or pediatric patient with negative behavior, accidental aspiration or ingestion of foreign body (ex: dental instrument) is one of the common accidents in dental procedure. Dentists and dental hygienists must have knowledge about the precaution and be ready to deal with foreign body aspiration during dental treatment, especially on the disabled. This is a case of an accident during the dental treatment of 14-year-old female patient with cerebral palsy. During scaling, prolonged retained primary tooth which had resorbed roots was fell into left bronchi. So we tried to remove the crown by endotracheal approach. Most ingested foreign bodies pass through the gastrointestinal tract spontaneously, but some of them need endoscopic or surgical removal. Moreover aspiration into broncho-trachea can be more serious events and must be treated as emergency situation.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.131-136
• /
• 2016

PURPOSE. The aim of this study was to observe stress concentration in the implant, the surrounding bone, and other components under the pull-out force during the crown removal. MATERIALS AND METHODS. Two 3-dimensional models of implant-supported conventional metal ceramic crowns were digitally constructed. One model was designed as a vertically placed implant ($3.7mm{\times}10mm$) with a straight abutment, and the other model was designed as a 30-degree inclined implant ($3.7mm{\times}10mm$) with an angled abutment. A pull-out force of 40 N was applied to the crown. The stress values were calculated within the dental implant, the abutment, the abutment screw, and the surrounding bone. RESULTS. The highest stress concentration was observed at the coronal portion of the straight implant (9.29 MPa). The stress concentrations at the cortical bone were lower than at the implants, and maximum stress concentration in bone structure was 1.73 MPa. At the abutment screws, the stress concentration levels were similiar (3.09 MPa and 3.44 MPa), but the localizations were different. The stress at the angled abutment was higher than the stress at the straight abutment. CONCLUSION. The pull-out force, applied during a crown removal, did not show an evident effect in bone structure. The higher stress concentrations were mostly observed at the implant and the abutment collar. In addition, the abutment screw, which is the weakest part of an implant system, also showed stress concentrations. Implant angulation affected the stress concentration levels and localizations. CLINICAL IMPLICATIONS. These results will help clinicians understand the mechanical behavior of cement-retained implant-supported crowns during crown retrieval.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.305-311
• /
• 2016

Induction heating is the process in which an electrically conducting object (usually a metal) is heated by electromagnetic induction through heat generated in the object by eddy currents. The main advantage of an induction heating device is the generation of the heat inside the target object itself. Hence, non-contact and safe heating devices are widely used in many industrial and medical fields. Recently, a new dental implant system was developed using a shape-memory alloy, wherein an artificial tooth could be easily removed from the dental implant by heating. This paper discusses the development of an induction-heating device to remove the dental crown in the new implant system. First, the finite element simulation of electromagnetic and thermal coupling analysis was implemented to obtain the temperature distributions of the target object for various frequencies, input currents, and coil shapes. Based on the simulation results, experiments were conducted by using prototypes, and an induction heating device was developed to remove the dental crown from the implant.

• The Journal of the Korean dental association
• /
• v.15 no.8
• /
• pp.623-626
• /
• 1977

The author made two implant blades of gold alloy metal, and applied CEKA attachment to one blade. These two blades were implanted at the sockets resulting from removal of both 3rd premolar of experimental dog. Simple crown and tooth supporting denture was constructed on the implanted blades the author observed above mentioned procedures for 8 weeks. The obtained results were as follows; 1) There is no remarkable necrosis of supporting alveolar bone on both sides So, metal reaction was favourable. 2) Masticatory force which is loaded on each tooth was not effective on the alveolar bone.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.2
• /
• pp.84-88
• /
• 2014

Traditional method of pulpectomy for a necrotic primary anterior tooth was done on lingual side. But it could not recover the discoloration of crown effectively. For the purpose of treating the discoloration of crown after lingual pulpectomy, additional methods of crown restoration were needed like : celluloid crown, open-faced crown, rasin-faced crown. Neverthless, these kinds of complete coverage methods had some disadvantages such as possibility of tooth fracture by increased tooth preparation. In order to overcome the shortcomings of lingual pulpectomy, labial treatment could be considered as an alternative. It is a method that treats necrotic pulp through the labial access opening. After finishing the pulp treatment, discolored labial tooth structure was removed extending from access opening. Discoloration of deep area could be masked effectively using opaque sealant. Cavity on labial side was restored with composite resin. This labial approach method has several advantages. First, it gives a direct vision for effective pulp treatment which is also very useful for children with poor behavior. Second, most of lingual tooth structure could be saved and occlusal contact of lingual surface remains undisrupted. Only nonfunctional discolored labial surface may removed. Third, complete removal of discolored part of a labial tooth and immediate resin restoration could be done effectively after pulp treatment. Moreover, it also could be used for pulp treatment having serious dental caries on labial surface with sound lingual tooth structure. This report presents cases with discolored upper anteior primary tooth, approaching labial side with successful restoration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.1-17
• /
• 2008

The purpose of this study were to report the reasons for removal of fixed prostheses and survival rate of abutment teeth. A total 192 fixed prostheses removed at Chosun university Dental Hospital and 308 abutment were investigated. The most frequent reason of removal was periodontal problem(30.7%), followed by caries(29.7%), then periapical problem(18.8%) and defective margins(14%). In metal ceramic crown, periodontal problem was the most frequent reason of removal. In complete cast crown, caries was the most frequent reason of removal. Periapical and periodontal problem was the most frequent reason people under forties and over fifties, respectively. Of the 308 abutment teeth, vital and non-vital teeth were 135(43.8%) and 173(56.2%), respectively. Of 135 vital abutment teeth, 39(28.9%) were extracted and of 173 non-vital abutment teeth, 85(49.1%) were extracted. Each risk factor for removal of fixed prostheses and extraction of abutment should be evaluated more clearly for prediction of prognosis of final prostheses and abutment teeth.