• Journal of Korean society of Dental Hygiene
• /
• v.23 no.1
• /
• pp.55-62
• /
• 2023

Objectives: The purpose of this study was to test the reliability and validity of an assessment tool for dental hygienists' consideration of patients with mild disabilities. Methods: Thirty-seven preliminary questions were compiled through literature review, and thirty-two questions were selected through content validity testing by eight experts. Two hundred and three dental hygienists completed the assessment tool as an online survey. The construct validity, internal consistency, and test-retest reliability of the tool were investigated using the SPSS 26.0 program. The construct validity was assessed using exploratory factor analysis. The internal consistency was assessed using Cronbach's alpha. The intraclass correlation coefficient (ICC) value with 95% confidence intervals was calculated for test-retest reliability. Results: Ten items and four factors were selected through exploratory factor analysis. The internal consistency reliability of the tool was found to be Cronbach's alpha=0.658, and test-retest reliability was found to be ICC=0.812. Conclusions: An assessment tool of care for patients with mild disabilities by dental hygienists is a reliable and valid tool suitable for the job characteristics of dental hygienists. It can be used in clinical practice and research.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.5
• /
• pp.387-393
• /
• 2023

Objectives: This study was attempted in order to understand about the satisfaction with major and the dental hygiene professionalism in dental hygiene students and to grasp the factors affecting the career preparation behavior. Methods: The research subjects included 264 juniors and seniors who are attending dental hygiene department across Korea (three locations in Gyeonggi province, one locations in Daejeon, four locations in Jeolla province, and one locations in Daegu). Data were collected using the online questionnaire between March 6 to April 7, 2023. The chosen data analysis method included descriptive statistical analysis, t-test, one-way ANOVA, Pearson's correlation coefficient, and stepwise multiple linear regression. Results: The following average scores were obtained from those surveyed: 3.25 points concerning career preparation behavior, 3.83 points concerning the respondent's satisfaction with their major, and 3.45 points concerning dental hygiene professionalism. As for a difference in career preparation behavior according to general characteristics, a meaningful difference was shown in terms of gender, motivation for entering the field, and first desired employment. Aspects of career preparation behavior, satisfaction with one's major, and dental hygiene professionalism showed a significant correlation and were confirmed to explain the prediction of 29.1% of the variation in the regression model. Conclusions: For the sake of having an integrated understanding about career preparation behavior among dental hygiene students, there is a need to conduct repeated research on diverse variables and to inquire into a causal relationships between such variables.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.128-136
• /
• 1992

This study was undertakened to investigate the change of image characteristics on dental films according to the process of using time of processing solution in automatic processor. Base + fog density, film density and subject contrast were measured with the digital densitometer, the pH of developing and fixing solution were measured with Digital pH / ION Meter. The following results were obtained: 1. Base + fog density was increased with the process of using time of the processing solution and was over the maximum permissible base + fog density 0.25 from the 3rd day. 2. Film density was increased with the process of using time of the processing solution. 3. Subject contrast was decreased with the process of using time of the processing solution. 4. The pH of the developing solution was decreased with the process of using time, the pH of the fixing solution was increased.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.124-130
• /
• 1998

The wear characteristics and wear mechanisms of dental composite resins were investigated. Composite resins such as Metalii, Silux Plus, Heliomolar and Palfique Estelite were selected as specimens and contents of filler in specimens in order to analyze the effect of Prepolymerized Particle Fillers in friction and wear characteristics. Ball on flat wear tester was used for a wear test. Friction and wear tests are carried out at room temperature. The friction coefficient of Metafil was quite high relatively, and the wear resistance of Silux Plus and Palfique Estelite was better than that of Metafil and Hellomolar at the same experimental condition. The main wear mechanism is plastic flow and abrasive wear by crack propagation.

• Tribology and Lubricants
• /
• v.15 no.2
• /
• pp.212-217
• /
• 1999

The wear characteristics and wear mechanisms of dental composite resins were investigated. Composite resins such as Metafil, Silux Plus, Heliomolar and Palfique Estelite were selected as specimens and contents of filler in specimens in order to evaluate the effect of Prepolymerized Particle Fillers in friction and wear characteristics. Ball on flat wear tester was used for the wear test at room temperature. The friction coefficient of Metafil was quite high relatively, and the wear resistances of Silux Plus and Palfique Estelite were better than that of Metafil and Heliomolar at the same experimental condition. It was found that The main wear mechanism is plastic flow and abrasive wear by failure of filler's bond to the matrix.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.187-187
• /
• 2014

In this study, we investigated mechanical properties and surface characteristics of Ti-25Ta-xHf alloys. The samples were manufactured for composition of Ti-25Ta-xHf(x=0 to 15 wt. %) alloys. Each alloy was melted twenty times in an arc-melting vacuum furnace. The microstructural phases and phase transformation of Ti-25Ta-xHf alloys were identified with the aid of an XRF, XRD and DSC. And mechanical properties were investigated using Vickers hardness, nanoindentation, and tensile test.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.2
• /
• pp.127-132
• /
• 2011

In Korea, the elderly is defined as the person aged over 65 and the disabled is defined as the person who is registered with Ministry of Health and Welfare. In 2008, the elderly with disabilities was about 770,000. Korea was already poised for an aging society in 2000 and is ahead of and aged society in 2018 and a super aged society in 2026. So, the number of the elderly with disabilities will continue to grow. Various oral diseases can be seen in the elderly with disabilities due to the systemic disease and impaired self oral care, in addition to the physiological aging. Particularly, we should be care for the aspiration pneumonia, which is the major cause of the death of the elderly. As a professional for the special care dentistry, we should understand the general and dental, individual characteristics of the elderly with disabilities and do proper oral care and treatment. Thereby, the quality of life of the patients might be improved.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.284-291
• /
• 2011

Numerical experiments on biological interfacial layer, DEJ by finite element software ABAQUS have been conducted to study its fracture behavior including crack bridging / arresting characteristics in the model. Crack growth simulation has been carried out by numerical tool, XFEM, devoted to study cracks and discontinuities. The fracture toughness of DEJ has been estimated before and after crack bridging. The implications of bridging in numerical study of fracture behavior of DEJ-like biological interface have been discussed. It has been observed that the results provided by the numerical studies without proper accommodation of bridging phenomenon can mislead. This study can be helpful for understanding the DEJ-like biological interface in terms of its fracture toughness, an important material characteristics. This property of the material is an important measure that has to be taken care during design and manufacturing processes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.10a
• /
• pp.136-137
• /
• 2003

In this study, in order to fabricate sintered dental implant, the effects of HA, Ti and TiN on corrosion and biocompatibility, cell toxicity, osseointegration of electroless Cu-plated and sintered stainless steel implant were investigated using various characteristics. The effects of Ti/TiN/HA coating on the interface activation and surface characteristics of sintered stainless steels(SSS) by electron-beam physical vapor deposition(EB-PVD) method have been studied. Stainless steel compacts containing 2, 4, and 10 wt%Cu were prepared by electroless Cu-plating method which results in the increased homogenization in alloying powder. The specimens were coated with HA, Ti and TiN with few $\mu\textrm{m}$ thickness respectively by EB-PVD method. The microstructures and phase analysis were conducted by using SEM. Biocompatibility were investigated in experimental dog. The corrosion behaviors were investigated using potentiosat in 0.9% NaCl solution and corrosion surface was observed using SEM and XPS.

• Journal of Korean Dental Hygiene Science
• /
• v.5 no.2
• /
• pp.25-33
• /
• 2022

Background: This study was aimed at investigating factors influencing the selection of dental institutions for implant surgery among young adults (age: 20-64 years) and identifying differences in these factors according to general characteristics. Methods: We conducted an internet survey for approximately 2 months, from April to July 2022, and analyzed data from a total of 128 people. Dental institution selection factors included three items of convenience of transportation, five items of physical environment, three items of image of institution, five items of image of dental staff, five items of dental service, and four items of basic dental elements. The importance score for each item was investigated on a five-point scale. Results: The importance score for each dental institution selection factor was the highest for dental service (4.42 points), followed by basic dental element (4.00 points), physical environment (3.89 points), image of institution (3.81 points), convenience of transportation (3.76 points), and image of dental staff (2.78 points). The importance score for each item was the highest for dentists' technique, followed by cleanliness, reliability, and dentists' attitude. Women had higher average scores for all factors compared to men, with statistical significance in scores for convenience of transportation, physical environment, image of institution, dental service, and basic dental elements (p< 0.05). Conclusion: To attract patients seeking implants to a dental institution, attention should be paid to the patients' institution selection factors. In addition, the environment of a dental institution should be created in such a way that it favors patients' selection factors.