• 제목/요약/키워드: Dental Health Condition

검색결과 427건 처리시간 0.026초

로웨 증후군 환아의 치아우식 치료 증례 보고 (DENTAL TREATMENT UNDER GENERAL ANESTHESIA IN A PATIENT WITH LOWE SYNDROME : A CASE REPORT)

  • 류지연;신터전;현홍근;김영재;김정욱;장기택;김종철;이상훈
    • 대한장애인치과학회지
    • /
    • 제12권2호
    • /
    • pp.82-86
    • /
    • 2016
  • 저자는 백내장, 지적장애, 신수질 석회화(medullary nephrocalcinosis), 근 긴장저하 증상을 보이는 로웨 증후군 환아의 다발성 치아우식 치료를 시행하였다. 협조도 부족 및 근 긴장저하로 인한 흡인 가능성을 고려하여 전신마취 하 술식을 진행하였다. 치료 결과의 유지를 위하여 적절한 구강위생 관리가 중요하며 향후 나타날 수 있는 구강내 증상의 진단과 관리를 위해 정기적이 검진이 필요하다.

선천성 범뇌하수체저하증(Congenital panhypopituitarism) 환자의 전신마취 하 치과치료 (DENTAL TREATMENT IN A PATIENT WITH CONGENITAL PANHYPOPITUITARISM UNDER GENERAL ANESTHESIA)

  • 김현태;송지수;현홍근;김영재;김정욱;장기택;이상훈;신터전
    • 대한장애인치과학회지
    • /
    • 제15권1호
    • /
    • pp.70-73
    • /
    • 2019
  • 선천성 뇌하수체저하증(Congenital panhypopituitarism)은 갖는 환자는 스트레스에 대한 대처 능력이 떨어지기 때문에 치과치료 전 발생할 수 있는 부신 급성발증(adrenal crisis)에 대해서 미리 대비하는 것이 중요하다 스트레스를 유발하는 치과치료 시행 시 호르몬 대체 요법의 시행을 고려해야 한다. 치과치료 전 환아의 연령과 전신상태를 고려하여 적절한 치료 방법을 선택해야 할 것이며 비정상적인 악안면 성장 패턴을 보일 가능성이 있으므로 성장관찰을 동반한 정기 검진이 요구된다.

Bartter 증후군 환아의 치아우식 치료: 증례보고 (DENTAL TREATMENT OF A PATIENT WITH BARTTER SYNDROME: CASE REPORT)

  • 김민지;송지수;신터전;현홍근;김영재;김정욱;이상훈;장기택
    • 대한장애인치과학회지
    • /
    • 제15권1호
    • /
    • pp.45-49
    • /
    • 2019
  • Bartter 증후군은 심각한 헨레고리 비후 상행각(TAL)에서의 일차적인 염류(NaCl) 수송 장애로 인하여 심각한 저칼륨혈증을 특징으로 하는 질환이다. 만성 구토로 인한 치아의 부식, 교모, 마모의 구강 내 소견을 보여 구토와 관련된 적절한 칫솔질 및 식이 습관 등에 대한 정기적인 교육과 관찰이 권장되며 교합고경의 회복을 위해 전장관 수복이 추천된다. 치과 치료 시의 스트레스로 인하여 전해질 수치의 불균형이 초래될 가능성이 있어 전신마취 하 치료가 유리할 수 있으며, 전신마취 시 과환기되어 저칼륨혈증이 심화되지 않도록 지속적인 감시를 해야하고 술 후에도 전해질 불균형이 초래되지 않도록 지속적인 감시가 필요하다.

고등학생의 치과이용실태와 통증 경험에 따른 치과공포에 대한 연구 (Study of Utilization of Dental High School and according to the Pain Experienced Dental Fear)

  • 전보혜;최영숙
    • 치위생과학회지
    • /
    • 제14권1호
    • /
    • pp.59-66
    • /
    • 2014
  • 본 연구는 청소년들이 느끼는 치과에 대한 공포와 불안감에 대해 알아보고 치과이용 실태와 과거 통증 경험 등이 어떤 영향을 미치는지에 관하여 알아보고자 경기 지역 일부 고등학교 352명을 대상으로 설문조사를 실시하여 다음과 같은 결과를 얻었다. 주사바늘이 살을 찌를 때($3.19{\pm}1.43$)와 마취용 주사바늘을 볼 때의 두려움($3.14{\pm}1.44$)이 높게 나타났고, 치아삭제용 드릴 소리($2.82{\pm}1.38$)와 치아삭제용 드릴을 볼 때의 두려움($2.74{\pm}1.36$), 치과 내원 시 근육 긴장($2.51{\pm}1.34$), 치료 대기 시 두려움($2.45{\pm}1.37$), 치아삭제 시 두려움($2.43{\pm}1.31$) 등의 순으로 나타났다. 치과치료 실태에 따라 치과 공포와 불안 수준에 차이가 있는지를 살펴본 결과, 충치치료를 받기위해 방문한 집단($2.75{\pm}0.94$)이 스켈링을 위해 방문한 집단($1.50{\pm}0.65$)에 비해 치과에 대한 공포와 불안감을 많이 느끼는 것으로 나타났다(p<0.01). 치과 공포와 불안에 영향을 미칠 것으로 예측되는 과거 치과 치료 시 통증 경험 수준은 3.45로 비교적 높게 나타났고, 가족이나 친구의 치과치료에 대한 통증을 들은 경험은 3.26점, 마취 미비 상태에서의 치과치료 경험은 2.47점으로 높지 않은 것으로 나타났다. 과거 치과 이용 시 통증 경험과 치과 공포 불안간의 관련성을 살펴보기 위하여 상관분석을 실시한 분석 결과 치과 치료 시 통증 경험과 마취 미비 상태에서의 치료 경험, 그리고 가족/친구의 치과치료 통증을 들은 경험 등의 변인 모두 치과에 대한 공포와 불안감과 유의미한 정(+)적 상관관계를 보였다. 학생의 성별과 현재의 치아 건강상태, 흡연 여부, 그리고, 치과치료 시 통증 경험, 마취 미비상태에서의 치료 경험, 가족/친구의 치과치료 통증을 들은 경험 등 과거의 치과 통증 경험 등의 변인이 치과 공포와 불안에 영향을 미치는 중요 예측 변인이었다.

일부 치위생과 학생의 자아개념에 관한 연구 (The research regarding the self concept of part dental hygienes students)

  • 정은경
    • 한국치위생학회지
    • /
    • 제6권3호
    • /
    • pp.219-228
    • /
    • 2006
  • The research which it sees against the self concept of part dental hygienes students from the hazard which it examines dental hygienes which is located on Kyoung-Buk and students 318 people in the object un-signature it enforced a research with the entry method which it got a same result. 1. From general characteristics of part hygiene students "the employment went well from the motive which selects hygiene" and it appeared most highly. The employment will go well and the social advance will do and ease when seeing specially with characteristics of college, it has an corresponding with the fact that is a possibility of employment.. 2. The average score against the self concept of part hygiene students "me it is an existence which is isolated from this world and nothing to do with the others". It appeared most highly with 3.52. The negation self concept appeared more highly affirmative self concept than. 3. To self concept and grade, religion, health condition, hygiene selection motive, subject record and native high school of part hygiene students the difference which considers statistically did not appear(p>0.05). However it tries to observe the self concept which it follows subject satisfactory degree, it is very unsatisfactorily(3.37) with it is unsatisfactorily(3.16) gaps it was not visible the difference which considers statistically, it is very satisfied(3.37) with the difference which considers statistically it was visible(p<0.05). Students the affirmative reaction is correct phenomenon in order to establish a specialty intuition. 4. When self concept and record and the subject satisfaction sees a interrelation for, Between self concept subject satisfaction is appeare big affirmative interrelation(r=0.331) and the subject record and subject satisfaction just interrelation appeared as well(r=0.282) all they considered statistically and appeared.(p=0.000) but to self concept and subject record for the interrelation did not appear. Negation self concept of part hygiene students appears more strongly than affirmative one, And studying for self concept of the students, it leads through the program which is the possibility to pull affirmatively is demanded.

  • PDF

치위생학과 대학생의 셀프리더십이 학습민첩성에 미치는 영향 (Effect of Self-Leadership in Dental Hygiene Students on Learning Agility)

  • 김서연
    • 산업융합연구
    • /
    • 제20권12호
    • /
    • pp.171-178
    • /
    • 2022
  • 본 연구는 치위생학과 대학생의 셀프리서십이 학습민첩성에 영향을 주는 요인을 파악하고자 한다. 2021년 9월 6일부터 10월 1일까지 K지역에 있는 2개 대학교 치위생학과 대학생을 대상으로 195부 시행하였다. 통계프로그램은 SPSS win 25.o을 이용하였다. 셀프리더십에 있어서는 대학생활 만족도, 전공만족도, 대인관계, 성격에 따라 통계적으로 유의한 차이가 나타났고 학습민첩성에 있어서는 흡연예방 및 금연교육, 건강상태, 대학생활 만족도, 전공 만족도, 대인 관계, 성격에 따라 통계적으로 유의한 차이가 나타났다. 치위생학과 대학생에게 셀프리더십이 학습민첩성을 높일 수 있는 프로그램 및 교육을 개발하여 학교만족도와 전공만족도를 높일 수 있는 방안이 필요하며 다양한 학문간의 접근으로 반드시 융합연구가 앞으로는 필요할 것으로 생각된다.

도재용착주조관용 비귀금속 합금의 사전 열처리가 도재-금속의 결합 강도에 미치는 효과 (The Effect of Oxidation Heat Treatment on Porcelain to Metal Bond Strength)

  • 김치영;남상용
    • 대한치과기공학회지
    • /
    • 제19권1호
    • /
    • pp.37-42
    • /
    • 1997
  • The interfacial bond strengh and microstructural analysis of pre-heat treated porcelain-fusedmetal(PFM) were investigated using a mechanical three-point bending tester and scanning electron microscope(SEM). Four kinds of heat treated samples were prepared as follows ; A: Heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating ${\to}1850^{\circ}F$, hold 3min under vacuum, B: heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating${\to}1850^{\circ}F$ under vacuum conditon, C: heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating${\to}1850^{\circ}F$, holding 3min in the air, repeat same heat treatment process under vacuum condition, D: heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating${\to}1850^{\circ}F$, holding 1min in the air. The three-point bening test result shows that the interfacial bond strength of specimen B and C were higher than that of A and D. The SEM study indicate that Specimen C shows the highest surface density.

  • PDF

Comparisons Fitness in Implant Abutment between Gas Soldering and Laser Welding

  • Cho, Mi-Hyang;Nam, Shin-Eun
    • International Journal of Clinical Preventive Dentistry
    • /
    • 제14권4호
    • /
    • pp.247-255
    • /
    • 2018
  • Objective: Osseointegration is essential process for successful implants and effects to implant in long term, therefore, passive fitness of good prosthesis is necessary. To make a good prosthesis, at first it should be done a sectioned casting and then joined method of sectioned casting body is recommended. Methods: In this study, to provide the fundamental data on stable connection method for successful implants, the author tested fitness of casting body, and compared difference between gas soldering technique and laser welding technique. Results: In fitness test of 2 abutment (test A, C), gas soldering group's fitness in the opposite part of connection was worse than laser welding group. In fitness test of 3 abutment (test B, D), gap distance was increased both in gas soldering technique and laser welding technique. Gap distance at the connecting part and the opposite part of the abutment in gas soldering technique was worse than laser welding technique and the more additional abutment, the worse gap distance in gas soldering technique. In fitness test of 3 abutment (test B, D), there's little variation in No. 2 abutment when connecting soldering process was done and there's little influence on already soldered connection part when the additional soldering connection was done. Conclusion: On weak loading condition and the part which is needed an accuracy, laser welding technique is more effective and on long-span prosthesis and frequent chewing loading part, laser welding technique is recommended first and applying additional gas soldering technique would be better for making much more successful prosthesis.

하악골의 치조골 골삭제를 위한 동적 제약 기구부의 성능에 관한 연구 (A Study on the Performance of Dynamic Restraint Manipulator for Drilling Alveolar Bone in Mandible)

  • 김광호;이동운;정상화
    • 한국기계가공학회지
    • /
    • 제19권12호
    • /
    • pp.105-112
    • /
    • 2020
  • The increase in the edentulous jaw which occurs in the aged population has led to personal dental health concerns. In the case of dental implant surgery, the duration of a patient's recovery depends on the surgical plan and their physicical ability. A device may be required to assist a physician in controlling vibration reduction of free-hand drilling and prescribing a good treatment plan that is suitable for the patient's condition. In this work, an artificial tooth-root implant assistant manipulator was studied. The structure and the vibration analysis of the dynamic restraint manipulator that is for drilling the alveolar bone in the mandible bone were performed, and the structural stability was analyzed. Further, a virtual prototype of an artificial tooth-root implant assisted manipulator was fabricated and tested. Hence, the state of the Remote Center of Motion (RCM) point and the driving state of the manipulator were confirmed. Furthermore, the drilling experiments were performed by using materials similar to a human jawbone in order to evaluate the performance of the drilling process that is operated using the assistant manipulator.

Three-dimensional cone-beam computed tomographic sialography in the diagnosis and management of primary Sjögren syndrome: Report of 3 cases

  • Thomas, Nithin;Kaur, Aninditya;Reddy, Sujatha S.;Nagaraju, Rakesh;Nagi, Ravleen;Shankar, Vidya Gurram
    • Imaging Science in Dentistry
    • /
    • 제51권2호
    • /
    • pp.209-216
    • /
    • 2021
  • Sjögren syndrome is a chronic autoimmune inflammatory disease characterized by lymphocytic infiltration of exocrine glands, predominantly the parotid and lacrimal glands, thereby resulting in oral and ocular dryness. It has been reported to occur most frequently in women between 40 and 50 years of age. Sjögren syndrome has an insidious onset, is slowly progressive, and presents a wide range of clinical manifestations, leading to delays or challenges in the diagnosis. Early diagnosis of this condition is essential to prevent the associated complications that affect patients' quality of life. This report presents 3 cases of Sjögren syndrome in female patients aged between 40 and 75 years who presented with complaints of persistent dry mouth and burning sensation. The cases highlight the diagnostic value of 3-dimensional cone-beam computed tomographic sialography in the detection of salivary gland pathologies at an early stage.